Search
Advanced search
Filter by category
Filter by committee
Search results
-
ASTM International’s committee on pedestrian/walkway safety and footwear (F13) recently held a four-day workshop to test instruments that measure the risks of people slipping while walking on various surfaces. According to organizers, this could help researchers, manufacturers, and others looking to improve walkway safety. The instruments – called walkway tribometers – assess slip resistance of…, Media Inquiries:, Dan Bergels, tel +1.610.832.9602; dbergels@astm.org, Committee Contact:, Molly Lynyak, tel +1.610.832.9743; mlynyak@astm.org Release #10595
-
ASTM International’s committee on plastic piping systems (F17) is developing a proposed standard that will provide procedures for rehabilitating or reconstructing pressure pipelines and conduits used for water, sewer, gas, and petroleum. The proposed standard (WK60068) describes the robotic application of a structurally independent spray in place pipe (SIPP) inside pipelines. Such application…, Media Inquiries:, Dan Bergels, tel +1.610.832.9602; dbergels@astm.org, Committee Contact:, Robert Morgan, tel +1.610.832.9732; rmorgan@astm.org Release #10570
-
Tyler Olson, engineering manager, materials, with the Fastenal Company, Winona, Minnesota, USA, was recently awarded the 2018 ASTM International James A. Thomas President’s Leadership Award. Katharine Morgan, ASTM International president, presented Olson with the award during standards development meetings last week in San Diego, California. The President’s Leadership Award recognizes…, Media Inquiries:, Dan Bergels, tel +1.610.832.9602; dbergels@astm.org Release #10559
-
John M. Kurdziel, chief engineer with Advanced Drainage Systems, Inc., Hilliard, Ohio, USA, was honored with the Frank W. Reinhart & Henry “Butch” Kuhlman Award from ASTM International’s committee on plastic piping systems ( F17 ). Kurdziel was recognized for faithful and significant contributions in furthering the cause of sound and effective plastic piping standardization. Kurdziel, an…, Media Inquiries:, Dan Bergels, tel +1.610.832.9602; dbergels@astm.org Release #10547
-
ASTM International’s committee on plastic piping systems ( F17 ) presented its top annual award – the Award of Merit – to White G. Jee of Sasol Chemicals North America LLC, in Houston, Texas, USA. The prestigious award, which includes the accompanying title of fellow, is ASTM’s highest recognition for individual contributions to developing standards. The committee honored Jee for outstanding…, Media Inquiries:, Dan Bergels, tel+1.610.832.9602; dbergels@astm.org, , Release #10539
-
A new ASTM International test method will help determine the carbonyl content of thermochemically derived bio-oils. Carbonyls contribute to instability during storage and processing of bio-oils. “This new standard provides a simple way to measure carbonyl content. This can help determine the quality of a bio-oil that will undergo further upgrading to fuels and chemicals,” says ASTM member Earl…, Media Inquiries:, Dan Bergels, tel +1.610.832.9602; dbergels@astm.org, Committee Contact:, Brian Milewski, tel +1.610.832.9619; bmilewski@astm.org Release #10518
-
William A. Ells, vice president of sales at Vibram USA in North Brookfield, Massachusetts, USA, will serve a three-year term on the ASTM International board of directors. Vibram USA is a manufacturer of footwear and soles for outdoor, recreational, work, military, and fashion boots and shoes. Ells has been with Vibram since 2010. He previously worked in sales at American Biltrite Inc. and…, Media Inquiries:, Dan Bergels, tel +1.610.832.9602; dbergels@astm.org Release #10457
-
A proposed ASTM International standard aims to use best practices to prevent contamination in manufacturing polyethylene pipe and fittings. The proposed standard ( WK56697 ) is being developed by ASTM International’s committee on plastic piping systems ( F17 ). According to ASTM International member Eugene Palermo, manufacturers could use the standard to prevent contamination from virgin resin,…, Media Inquiries:, Dan Bergels, tel +1.610.832.9602; dbergels@astm.org, Committee Contact:, Robert Morgan, tel +1.610.832.9732; rmorgan@astm.org Release #10426
-
ASTM International is developing a proposed standard for measurement of the traction of pedestrian walkways, including in wet conditions. The proposed standard ( WK60578 ) covers the use of variable-angle tribometers, which are a particular configuration of devices that measure friction. The standard is being developed by the traction subcommittee of ASTM International’s committee on pedestrian/…, Media Inquiries:, Dan Bergels, tel +1.610.832.9602; dbergels@astm.org, Committee Contact:, Molly Lynyak, tel +1.610.832.9743; mlynyak@astm.org Release #10421
-
Proposed standard WK58343, Specification for Cold-Expansion Fittings with PEX Compression Sleeves for Crosslinked Polyethylene (PEX) Tubing, is currently being developed by ASTM International’s committee on plastic piping systems ( F17 ). The standard would help support fittings and sleeves for PEX piping systems capable of high pressures and temperatures. The new cold-expansion fittings and PEX…, ASTM Committee F17 on Plastic Piping Systems Next Meeting:, Nov. 13-16, 2017, November Committee Week, Atlanta, Ga., Media Inquiries:, Dan Bergels, tel +1.610.832.9602; dbergels@astm.org, Technical Contact:, David Nickelson, Rehau Construction LLC, Leesburg, Va., tel +1.703.777.5255; david.nickelson@rehau.com, ASTM Staff Contact:, Robert Morgan, tel +1.610.832.9732; rmorgan@astm.org R elease #10301