Search
Advanced search
Filter by category
Filter by committee
Search results
-
ASTM International’s particle and spray characterization committee ( E29 ) is developing a proposed standard that will be used to measure physical and chemical properties of nanoparticles in a variety of industrial realms. The standard ( E3427 ) describes how to use laser-amplified detection/power spectrum analysis to measure the number of physical and chemical properties of nanoparticles,…, Media Inquiries:, Gavin O’Reilly, tel +1.610.832.9618; goreilly@astm.org, Committee Contact:, Jennifer Tursi, tel +1.610.832.9653; jtursi@astm.org Release #11790 ###
-
ASTM International’s security systems and equipment committee ( F12 ) has developed and approved several standards designed to assess the performance of security screening technologies. These standards cover three different types of metal detectors: hand-worn ( F3020 ), hand-held ( F3278 ), and walk-through ( F3566 ). The committee also approved a practice for conformity assessment of metal…, Verification Program Contact, : Anna Seiple, tel +1.703.930.0971; aseiple@seinet.org Release #11650 ###
-
ASTM International’s performance of buildings committee ( E06 ) has developed a new test method for moisture in insulating glass. The test method introduced in this standard, currently known as WK83631 , will measure moisture ingress into insulating glass, and allow for predicting window lifetimes. Insulated glass is often used in residential and industrial locations to maintain heat and humidity…, Media Inquiries:, Dan Bergels, tel +1.610.832.9602; dbergels@astm.org, Committee Contact:, Frank McConnell, tel +1.610.832.9686; fmcconnell@astm.org Release #11582 ###
-
A new ASTM International standard will describe in detail the design and specification process for water vapor transmission properties of water-resistive barriers and air barriers(WRB/AB) in building construction. ASTM’s performance of buildings committee ( E06 ) developed the new standard, which will soon be published as E3127. ASTM International member Danko Davidovic says that the new standard…, Media Inquiries:, Dan Bergels, tel +1.610.832.9602; dbergels@astm.org, Committee Contact:, Steve Mawn, tel +1.610.832.9726; smawn@astm.org Release #11441 ###
-
Particle size distribution is an important factor in the manufacture of many products, from cement to perfume. A proposed ASTM International standard ( WK45240 ) will set out a general approach to the particle size distribution measurement of powders, suspensions, or slurries using an appropriate wet or dry methodology by the laser diffraction technique. ASTM’s committee on particle and spray…
-
A proposed ASTM International standard will help engineers to better understand how various climates affect water vapor transmission of water-resistive barriers and air barriers (WRB/AB) in building envelopes. ASTM’s performance of buildings committee ( E06 ) is developing the proposed standard. ASTM International member Danko Davidovic says that the proposed standard ( WK51917 ) will explain…, Media Inquiries:, Jaime Martorana, tel +1.610.832.9796; jmartorana@astm.org , Committee Contact:, Stephen Mawn, tel +1.610.832.9726; smawn@astm.org Release #11213 ###
-
A new ASTM International standard will help architects who are designing mockup structures used to prepare for the construction of a new building. ASTM’s committee on performance of buildings ( E06 ) developed the standard, which will soon be approved as E3223. ASTM International member Eric Peterson notes that when new buildings are constructed, especially large complex buildings with intricate…, Media Inquiries:, Jaime Martorana, tel +1.610.832.9796; jmartorana@astm.org , Committee Contact:, Stephen Mawn, tel +1.610.832.9726; smawn@astm.org Release #11152 ###
-
A proposed standard will be used to support the periodic assessment of cavity wall facades. ASTM’s committee on the performance of buildings (E06) is developing the standard. In cavity wall facades, a grid of wall ties provides lateral restraint between the exterior veneer and the back-up wall. The proposed guide will support stability assessments of such facades. According to ASTM member Michael…
-
In light of COVID-19 (coronavirus) and growing safety concerns for members and staff, ASTM International announced today that previously scheduled April standards development meetings in Boston (March 29-April 3) and Prague (April 27-30) have been canceled. The decision was based on several factors, including, but not limited to: Continued review of information and recommendations from the U.S.…, Media Inquiries:, Dan Bergels, tel +1.610.832.9602; dbergels@astm.org Release #10993
-
The Safety Equipment Institute (SEI), an affiliate of ASTM International, has launched a certification program for hand-worn and hand-held metal detectors that are covered in three ASTM standards (F3020, F3278, and F3356). The program deals with characteristics that should affect the model’s ability to meet the performance requirements of the certification standard. These characteristics include…, About Safety Equipment Institute, or over 35 years, the Safety Equipment Institute (SEI) has served as one of the world's leading independent third-party certification program providers. An affiliate of ASTM International, SEI is the organization hundreds of top companies turn to for their product certification needs., About ASTM International, Committed to serving global societal needs, ASTM International positively impacts public health and safety, consumer confidence, and overall quality of life. We integrate consensus standards – developed with our international membership of volunteer technical experts – and innovative services to improve lives… Helping our world work better. , Media Inquiries:, Dan Bergels, tel +1.610.832.9602; dbergels@astm.org, Committee Contact:, Chad Morey, tel +1.703.442.5732, ext. 4020; cmorey@seinet.org Release #10976