Search
Advanced search
Filter by category
Filter by committee
Search results
-
A new ASTM International guide responds to a decades-long need to enhance safety surrounding protective coating systems at nuclear power plants. The new standard (soon to be published as D8104, Guide for Determining Coating Qualification Test Data Applicability) was developed by ASTM International’s committee on protective coating and lining work for power generation facilities ( D33 ). According…, Media Inquiries:, Dan Bergels, tel +1.610.832.9602; dbergels@astm.org, Technical Contact:, Jon R. Cavallo, PE, tel +1.603.767.8650; jrcpe@aol.com, ASTM Staff Contact:, Joseph Hugo, tel +1.610.832.9740; jhugo@astm.org R elease #10288
-
Irving S. Scher, Ph.D., P.E., a principal and biomechanical engineer at Guidance Engineering and Applied Research, will serve a three-year term on the ASTM International board of directors. Scher is based in Seattle, Washington. Guidance Engineering and Applied Research is an engineering and scientific consulting company that performs in-depth research and analysis for its clients. Scher holds…, Media Inquiries:, Dan Bergels, tel +1.610.832.9602; dbergels@astm.org Release #10241
-
A new ASTM International standard will empower producers of certain kinds of plastic tubes to conduct better, faster quality control testing at a lower cost and with greater accuracy. Due to its enhanced properties, cross-linked polyethylene (PEX) is increasingly used to make plastic tubes for building systems as well as for the oil, gas, chemical, sewage, and water industries. The new standard (…, ASTM Committee F17 on Plastic Piping Systems Next Meeting:, Nov. 15-17, 2016, November Committee Week, Orlando, Fla., Media Inquiries:, Dan Bergels, tel +1.610.832.9602; dbergels@astm.org, Technical Contact:, Robert Samplonius, Kafrit NA Ltd., British Columbia, Canada, tel +1.604.607.6730; samplonius@kafrit.ca, ASTM Staff Contact:, Robert Morgan, tel +1.610.832.9732; rmorgan@astm.org Release #10167
-
A new standard will help test technology that is used in many electronic devices. According to ASTM members Lin Tingyu (National Center for Advanced Packaging) and Hi Jinjiang (Grikin Advanced Materials Co. Ltd.), the new standard will provide a baseline of quality, reliability, and process for manufacturers of “sputtering targets,” which are often used for thin-film deposition, etching, and…, ASTM Committee F01 on Electronics Next Meeting:, January 31, 2017, January Committee Week, Norfolk, Va., Media Inquiries:, Dan Bergels, tel +1.610.832.9602; dbergels@astm.org, Technical Contact:, Lin Tingyu, National Center for Advanced Packaging, Wuxi, Jiangsu province, China, tel +1.535.805.3318; tingyulin@ncp-cn.com, ASTM Staff Contact:, Kelly Paul, tel +1.610.832.9745; kpaul@astm.org Release #10163
-
Today, the U.S. Department of Agriculture selected the Safety Equipment Institute - a subsidiary of ASTM International - to manage the certification program that supports labeling thousands of products as "biobased." The renewal of this five-year contract will mean that more and more people will be able to find and purchase products that are made and packaged using renewable materials. “This…, Program Contact:, Pat Gleason, tel. +1.703.442.5732; pgleason@seinet.org, Media Inquiries:, Dan Bergels, tel. +1.610.832.9602; dbergels@astm.org Release #10160
-
ASTM is launching a new subcommittee that will develop test methods and specifications for coatings and linings used in hydroelectric power plants. The new group is part of the Committee on Protective Coatings and Lining Work for Power Generation Facilities ( D33 ). Subcommittee D33.13 on Protective Coatings and Linings for Hydroelectric Power Generation Facilities will address abrasion,…, ASTM Committee D33 on Protective Coatings and Lining Work for Power Generation Facilities Next Meeting:, July 20–21, 2016, West Conshohocken, Pa., Media Inquiries:, Dan Bergels, tel +1.610.832.9602; dbergels@astm.org, Technical Contact:, Allen Skaja, U.S. Bureau of Reclamation, Lakewood, Colo., tel +1.303.445.2396; askaja@usbr.gov, ASTM Staff Contact:, Joe Hugo, tel +1.610.832.9740; jhugo@astm.org Release #10113
-
As a result of the Safety Equipment Institute becoming a subsidiary of ASTM International on April 19, SEI is expanding its offerings beyond its existing product certifications to include personnel certifications and environmental declaration programs. The SEI Board Standing Committee on Certification Programs met for the first time yesterday. It approved operating manuals and procedures for SEI’…, Media Inquiries:, Dan Bergels, tel. +1.610.832.9602; dbergels@astm.org, SEI Staff Contact:, Pat Gleason, tel. +1.703.442.5732; pgleason@seinet.org Release #10101
-
The polyethylene piping industry continues to increase the size of pipe diameters and pipe wall thicknesses used in the transportation of gas, water, and oil. The original reverse bend test in F2620 is of limited capability when testing heat fusion joints in wall pipe systems that are heavier with larger diameters. A new standard (soon to be published as F3183, Practice for Guided Side Bend…, ASTM Committee F17 on Plastic Piping Systems Next Meeting:, Nov. 14-17, 2016, November Committee Week, Orlando, Fla., Media Inquiries:, Dan Bergels, tel +1.610.832.9602; dbergels@astm.org, Technical Contact:, Steve Sandstrum, tel +1.502.318.6754; steve.sandstrum@isco-pipes.com, ASTM Staff Contact:, Robert Morgan, tel +1.610.832.9732; rmorgan@astm.org Release #10091
-
A new ASTM International standard will help train workers who operate heat fusion equipment (HFE) to fuse plastic pipes. This standard could help enhance safety for workers, ensure longevity of pipes, and strengthen infrastructure overall. Until now, there was not a guideline for properly training workers nor a description of requirements to qualify as an operator. (Many companies relied on HFE…, Committee F17 on Plastic Piping Systems Next Meeting:, Nov. 14-17, 2016, November Committee Week, Orlando, FL., Media Inquiries:, Dan Bergels, tel +1.610.832.9602; dbergels@astm.org, Technical Contact:, Jim Craig, Jim Craig Consulting, LLC; tel +1.918.720.3670; jcraig211@cox.net, ASTM Staff Contact:, Robert Morgan, +1.610.832.9732; rmorgan@astm.org Release #10077
-
A newly proposed standard ( WK54335 , Specification for Cellular Wall Polypropylene (PP) Chambers) concerning storm water collection chambers is being developed. With cellular wall PP chambers being installed as part of road and parking lot construction, wheel load and soil weight place significant structural demand on the product. A structurally sound product is essential to ensure the safety of…, Committee F17 on Plastic Piping Systems Next Meeting:, Nov. 14-17, 2016, November Committee Week, Orlando, Fla., Media Inquiries:, Dan Bergels, tel +1.610.832.9602; dbergels@astm.org, Technical Contact:, David Mailhot, Stormtech, South Coventry, Conn., tel +1.860.391.3672; david.mailhot@ads-pipe.com, ASTM Staff Contact:, Robert Morgan, tel +1.610.832.9732; rmorgan@astm.org Release #10074