Search
Advanced search
Filter by category
Filter by committee
Search results
-
A proposed ASTM International standard will allow manufacturers to make better use of portable goniometers to measure angles of drops of liquid when applied to a surface for testing the wettability of coatings, substrates, and pigments. ASTM’s paint and related coatings, materials, and applications committee ( D01 ) is developing the proposed standard ( WK72334 ). “The ability to bridge the gap…, Media Inquiries:, Dan Bergels, tel +1.610.832.9602; dbergels@astm.org, Committee Contact:, Nora Nimmerichter, tel +1.610.832.9815; nnimmerichter@astm.org Release #11022 ###
-
A proposed ASTM International standard describes a way of measuring organic coating film thickness without destroying the coating itself. ASTM’s committee on paint and related coatings, materials, and applications ( D01 ) is developing the proposed standard ( WK68904 ). “In many industries, the thickness of coating layer applied is both important and difficult to measure accurately,” says ASTM…, Media Inquiries:, Dan Bergels, tel +1.610.832.9602; dbergels@astm.org, Committee Contact:, Nora Nimmerichter, tel +1.610.832.9815; nnimmerichter@astm.org Release #11020 ###
-
In light of COVID-19 (coronavirus) and ongoing safety concerns for members and staff, ASTM International announced today that all previously scheduled in-person June standards development meetings (including independent meetings) have been canceled. Last month, ASTM International announced the cancellation of all May in-person meetings . These decisions were based on several factors, including…, Media Inquiries:, Dan Bergels, tel +1.610.832.9602; dbergels@astm.org Release #11017 ###
-
In light of COVID-19 (coronavirus) and ongoing safety concerns for members and staff, ASTM International announced today that all previously scheduled in-person May standards development meetings (including independent meetings) have been canceled. Earlier this month, ASTM International announced the cancellation of all April in-person meetings . These decisions were based on several factors,…, Media Inquiries:, Dan Bergels, tel +1.610.832.9602; dbergels@astm.org Release #11001 ###
-
A new ASTM International standard will help improve the accuracy of temperature measurement essential in many industries. ASTM’s temperature measurement committee ( E20 ) developed the new standard. “Temperature is one of the most measured physical quantities in industry,” says ASTM International member Frank Liebmann, a metrology engineer at Fluke Calibration. “It affects most industrial…, Media Inquiries:, Dan Bergels, tel +1.610.832.9602; dbergels@astm.org, Committee Contact:, Krista Robbins, tel +1.610.832.9689; krobbins@astm.org Release #10928
-
ASTM International’s committee on paint and related coating, materials, and application ( D01 ) presented its top annual award – the Award of Merit – to Fred Gelfant, vice president of R&D for Stonhard in Maple Shade, New Jersey, USA. The prestigious award, which includes the accompanying title of fellow, is ASTM’s highest recognition for individual contributions to developing standards. The…
-
Kelly Meares, director with Tateho Ozark Technical Ceramics in Webb City, Missouri, USA, was honored with the Robert D. Thompson Memorial Award by the ASTM International committee on temperature measurement ( E20 ). Meares, an ASTM International member since 2005, was recognized for his continuing contributions and dedication to the development of temperature measurement standards and his…, Media Inquiries:, Dan Bergels, tel +1.610.832.9602; dbergels@astm.org Release #10695
-
Members of ASTM International recently revised a key test method ( D1613 ) that has been used to measure the acidity of fuel ethanol and denatured fuel ethanol, including ethanol used for car gasoline blends. By including a new “nitrogen purge” as part of the test method, a laboratory can help ensure that carbon dioxide is removed. According to ASTM International member Shon Van Hulzen, the…, Media Inquiries:, Dan Bergels, tel +1.610.832.9602; dbergels@astm.org, Committee Contact:, Karen Murphy, tel +1.610.832.9525; kmurphy@astm.org Release #10521
-
ASTM International’s new committee on exoskeletons and exosuits ( F48 ) held their first meeting Feb. 13-14 in Philadelphia, Pennsylvania, USA, near the organization’s global headquarters. The need for technical standards has grown alongside the rising use of exoskeletons in manufacturing, military, health, and other applications. One of the group’s first new standards will support terminology…, Media Inquiries:, Dan Bergels, tel +1.610.832.9602; dbergels@astm.org, Committee Contact:, Pat Picariello, tel +1.610.832.9720; ppicariello@astm.org Release #10490
-
Yesterday, the board of directors of ASTM International, one of the world’s leading standards developers, approved the formation of an exoskeletons and exosuits committee (designated F48). Leaders from dozens of companies, associations, government agencies, and other organizations helped organize the new group on Sept. 14. These stakeholders saw a need for standardization that supports innovation…, Media Inquiries:, Dan Bergels, tel +1.610.832.9602; dbergels@astm.org, Committee Contact:, Pat Picariello, tel +1.610.832.9720; ppicariello@astm.org Release #10414