Search
Advanced search
Filter by category
Filter by committee
Search results
-
ASTM International Committee D01 on Paint and Related Coatings is seeking participation from interested parties in developing a proposed new standard, WK12492 , Practice for Rheological Characterization of Architectural Coatings Using Three Common Bench Viscometers. The proposed standard covers a popular industry protocol and includes general guidelines for predicting some coatings performance…
-
A new ASTM International standard provides information and criteria for estimating the thickness of oil on water using only visual clues. The standard, F 2534 , Guide for Visually Estimating Oil Spill Thickness on Water, was developed by Subcommittee F20.16 on Surveillance and Tracking to provide a consistent means of visual oil spill thickness detection. Subcommittee F20.16 is under the…
-
Over the last three years, single-point spray systems have emerged as a leading form of oil spill dispersant, which has led to the development of a new standard by ASTM International Committee F20 on Hazardous Substances and Oil Spill Response. The standard, F 2465, Guide for Oil Spill Dispersant Application Equipment: Single-Point Spray Systems, is under the jurisdiction of Subcommittee F20.13…
-
The ongoing need to deal with oil in stranded ships, especially those in remote areas, is the impetus behind a proposed new standard being developed by ASTM International Committee F20 on Hazardous Substances and Oil Spill Response. One possible response to such a crisis, burning the oil on the ship before it can damage the environment, is the subject of the proposed standard, F 2533, Guide for…
-
A proposed new standard currently being developed by ASTM International Committee F01 on Electronics will prove to be useful to the tantalum sputtering target industry. The proposed standard, WK9490, Test Method for Reporting Crystallographic Orientation of Sputtering Target Materials, is under the jurisdiction of Subcommittee F01.17 on Sputter Metallization. "The tantalum sputtering target…
-
ASTM International Committee D01 on Paint and Related Coatings, Materials and Applications will hold its annual mini-symposium on Jan. 24, 2006, at the Embassy Suites Hotel in Ft. Lauderdale, Fla. The focus of the sessions will be on the role and use of statistics in the development of standard test methods, with emphasis on recent developments. The following three lectures will be given during…, Statistical Requirements Inside and Outside ASTM International, Many coatings and raw material manufacturers have registered to the ISO 9002 standard. That standard has been replaced by ISO 9001:2000, with the requirements for the new standard being more extensive. However, some of the new requirements can be met by using basic statistical techniques. This presentation, which will be given by Robert Morrison, is an overview of the new requirements and compare…, The Use of Ranked vs. Rated Data in the Evaluation of Weathered Specimens or Material, The evaluation of specimens after weathering can be handled by a number of approaches; two of these are rating and ranking. Rating requires one to compare the specimens against a scale (i.e., 1 to 10). Ranking, on the other hand, requires the direct comparison of the specimens against each other. Louis Asher will make this presentation, which will center on these two approaches and will…, ASTM International Interlaboratory Study Program, ASTM International recently approved a new Interlaboratory Study Program. Through this program, ASTM is providing staff support and financial resources to technical committees by offering assistance with the identification of participating laboratories, overseeing the generation of sample distribution, collecting data, and generating precision and bias statements and research reports. This…
-
ASTM International Committee F01 on Electronics is currently developing a proposed new standard that will provide uniformity in the values reported for oxygen content in aluminum alloys used for sputtering targets in the manufacture of integrated circuits. The proposed standard, WK9120, Determination of Oxygen in High Purity Aluminum and Alloys in High Purity Aluminum Base by Inert Gas Fusion…
-
ASTM International Subcommittee D01.23 on Physical Properties of Applied Paint Films has approved three new standards that each deal with different types of measurements for paint coatings. Subcommittee D01.23 is under the jurisdiction of Committee D01 on Paint and Related Coatings, Materials, and Applications. Titles and descriptions of each new standard follow. , D 6991, Test Method for Internal Stresses in Organic Coatings by Cantilever (Beam) Method, Test Method D 6991 covers the procedure for measuring internal stresses in organic coatings by using the cantilever (beam) method. The test method can be used to determine the internal stresses in coatings after they have cured. Most organic coatings shrink when they cure. This induces an internal stress in the coatings. If the substrate is flexible, such as a vinyl composition tile, and has…, D 7091, Practice for Nondestructive Measurement of Dry Film Thickness of Nonmagnetic Coatings Applied to Ferrous Metals and Nonmagnetic, Nonconductive Coatings Applied to Nonferrous Metals, The development of D 7091 is the result of subcommittee discussions on the need to revise or replace D 1186, Test Method for Nondestructive Measurement of Dry Film Thickness of Nonmagnetic Coatings Applied to a Ferrous Base, and D 1400, Test Method for Nondestructive Measurement of Dry Film Thickness of Nonconductive Coatings Applied to a Nonferrous Metal Base. Rather than revising or…, D 7187, Test Method Measuring Mechanical Aspects of Scratch/Mar Behavior of Paint Coatings by Nanoscratching, Test Method D 7187 determines the resistance to mar and scratch of paint coatings on smooth, flat surfaces. The standard, which had its origin in a paper presented by Li Lin, DuPont, at the 2002 Committee D01 Centennial symposium on new directions in coatings performance technology, is a possible solution to recent searches within the automotive industry for a better way to measure the scratch…
-
, New ASTM Committee to Develop Standards That Will Facilitate New System Designs and Industry Growth, ASTM International, one of the largest voluntary standards development organizations (SDOs) in the world, today announced the formation of ASTM Committee F41 on Unmanned Undersea Vehicle (UUV) Systems. This important standards initiative was driven by the cooperative efforts of the United States Navy and UUV industry stakeholders to facilitate new UUV system designs and enable next-generation…, Critical Role in Oceanographic Research, Commercial and Military Applications, UUVs have a notable history dating back to the early 1980s. Early systems built on their manned submersible predecessors and helped transform oceanographic research during the decade. Used by the academic community in notable deep-sea expeditions, such as the discovery and exploration of the wreck of the Titanic, UUVs have played a critical role in ocean surveying, environmental monitoring, and…, UUV Growth and Evolution: ASTM Standards Will Help Lead the Way, Todays UUV industry includes two classes of systems: remotely operated vehicles (ROVs), which are attached to a mother-ship by a long cable; and autonomous underwater vehicles (AUVs), which operate without a tether. To better meet the challenges of emerging applications, existing UUV systems must evolve with new technology. Specific areas of need include greater interoperability among…, Fast and Efficient Standards Development Through the ASTM Process, Led by the Association for Unmanned Vehicle Systems International (AUVSI), the premier trade association for the unmanned systems industry, UUV stakeholders selected ASTM International as the SDO best suited for the development of new international industry standards. With a proven consensus process and state-of-the-art standards development infrastructure, ASTM International was best positioned…, Public/Private Sector Collaboration under the ASTM Umbrella, ASTM Committee F41 is another example of the long-standing partnership between the public and private sectors in developing consensus standards under the ASTM International process. F41 brings together technical experts from the UUV industry, federal government, trade associations and academia to develop voluntary consensus standards pertaining to UUV design, safety and performance including…
-
ASTM International Task Group D01.42.20 is soliciting participants to conduct a round robin to evaluate the precision of ASTM standard D 4446, Test Method for Anti-Swelling Effectiveness of Water-Repellent Formulations and Differential Swelling of Untreated Wood When Exposed to Liquid Water Environments. This standard is commonly known as the wood swellometer test and is widely used by…