Search
Advanced search
Filter by category
Filter by committee
Search results
-
Determining the pressure rating for PVC plastic pipe is a relatively straightforward process because pipe is a cylinder with a uniform wall thickness. However, establishing a pressure rating for PVC fittings is a more complex process, chiefly because there are many sizes, patterns and variations among manufacturers involved. A new ASTM International standard, F 2261 , Test Method for Pressure…
-
Keeping pipes properly connected is clearly an important aspect of any sewer maintenance system. A new ASTM International standard, F 2561 , Practice for Rehabilitation of a Sewer Service Lateral and Its Connection to the Main Using a One-Piece Main and Lateral Cured-in-Place Liner, has been developed that makes the process of keeping sewer pipelines connected more effective. Practice F 2561 is…
-
ASTM International Committee D01 on Paint and Related Coatings, Materials and Applications will hold its annual mini-symposium on Jan. 24, 2006, at the Embassy Suites Hotel in Ft. Lauderdale, Fla. The focus of the sessions will be on the role and use of statistics in the development of standard test methods, with emphasis on recent developments. The following three lectures will be given during…, Statistical Requirements Inside and Outside ASTM International, Many coatings and raw material manufacturers have registered to the ISO 9002 standard. That standard has been replaced by ISO 9001:2000, with the requirements for the new standard being more extensive. However, some of the new requirements can be met by using basic statistical techniques. This presentation, which will be given by Robert Morrison, is an overview of the new requirements and compare…, The Use of Ranked vs. Rated Data in the Evaluation of Weathered Specimens or Material, The evaluation of specimens after weathering can be handled by a number of approaches; two of these are rating and ranking. Rating requires one to compare the specimens against a scale (i.e., 1 to 10). Ranking, on the other hand, requires the direct comparison of the specimens against each other. Louis Asher will make this presentation, which will center on these two approaches and will…, ASTM International Interlaboratory Study Program, ASTM International recently approved a new Interlaboratory Study Program. Through this program, ASTM is providing staff support and financial resources to technical committees by offering assistance with the identification of participating laboratories, overseeing the generation of sample distribution, collecting data, and generating precision and bias statements and research reports. This…
-
Although ASTM International Committee E56 on Nanotechnology was just established this year, it has already begun an ambitious program of developing new standards. Committee E56 is currently developing the following proposed standards, which deal with environmental safety issues, hemolytic properties and particle size measurement. Interested parties are invited to participate in the development of…, WK8985, Guide for Handling Unbound Engineered Nanoparticles in Occupational Settings, Academic, government and industrial laboratories are currently performing nanotechnology research and development and the scope and breadth of this work is expected to grow dramatically. Manufacturing processes involving nanomaterials have begun and commercially available nano-based products have been introduced. All of this activity in the nanotechnology realm has created the need for the…, WK8997, Practice for Analysis of Hemolytic Properties of Nanoparticles, Subcommittee E56.02 on Characterization has begun working on proposed new standard WK8997, Practice for Analysis of Hemolytic Properties of Nanoparticles. This proposed standard would provide a suitable procedure for establishing the safety of nanoparticulate materials that will be used in vivo , such as nanoparticles for therapeutics and diagnostics. "Nanotechnology products will be used in…, For further technical information, contact Scott McNeil, director, Nanotechnology Characterization Laboratory, Frederick, Md. (phone: 301/846-6939; mcneils@ncifcrf.gov )., WK8705, Measurement of Particle Size Distribution of Nanomaterials in Suspension by Photon Correlation Spectroscopy (PCS), Subcommittee E56.02 was formed to answer questions regarding characterization, such as size and shape of materials. Another proposed new standard under the jurisdiction of Subcommittee E56.02 is WK8705, Measurement of Particle Size Distribution of Nanomaterials in Suspension by Photon Correlation Spectroscopy (PCS), which deals with the vital issue of size characterization. The purpose of the…
-
ASTM International Subcommittee D01.23 on Physical Properties of Applied Paint Films has approved three new standards that each deal with different types of measurements for paint coatings. Subcommittee D01.23 is under the jurisdiction of Committee D01 on Paint and Related Coatings, Materials, and Applications. Titles and descriptions of each new standard follow. , D 6991, Test Method for Internal Stresses in Organic Coatings by Cantilever (Beam) Method, Test Method D 6991 covers the procedure for measuring internal stresses in organic coatings by using the cantilever (beam) method. The test method can be used to determine the internal stresses in coatings after they have cured. Most organic coatings shrink when they cure. This induces an internal stress in the coatings. If the substrate is flexible, such as a vinyl composition tile, and has…, D 7091, Practice for Nondestructive Measurement of Dry Film Thickness of Nonmagnetic Coatings Applied to Ferrous Metals and Nonmagnetic, Nonconductive Coatings Applied to Nonferrous Metals, The development of D 7091 is the result of subcommittee discussions on the need to revise or replace D 1186, Test Method for Nondestructive Measurement of Dry Film Thickness of Nonmagnetic Coatings Applied to a Ferrous Base, and D 1400, Test Method for Nondestructive Measurement of Dry Film Thickness of Nonconductive Coatings Applied to a Nonferrous Metal Base. Rather than revising or…, D 7187, Test Method Measuring Mechanical Aspects of Scratch/Mar Behavior of Paint Coatings by Nanoscratching, Test Method D 7187 determines the resistance to mar and scratch of paint coatings on smooth, flat surfaces. The standard, which had its origin in a paper presented by Li Lin, DuPont, at the 2002 Committee D01 Centennial symposium on new directions in coatings performance technology, is a possible solution to recent searches within the automotive industry for a better way to measure the scratch…
-
A growing interest in a more durable structure for grease traps has resulted in the development of a proposed new ASTM standard, WK7686, Specification for High Density Polyethylene Grease Trap Interceptor Units. The proposed standard is under the jurisdiction of ASTM Subcommittee F17.26 on Olefin Based Pipe, which is part of Committee F17 on Plastic Piping Systems. "The impetus for developing…
-
Open Meetings and One-Day Workshop in May, The National Institute of Advanced Industrial Science and Technology (AIST) in Japan has become the latest organization to sign a partnership agreement with ASTM International to develop a terminology standard for nanotechnology. AIST is an Independent Administrative Institution (IAI) in association with the Japanese Ministry of Economy, Trade and Industry (METI). AIST represents an amalgamation…, Partnerships Prove Beneficial, An early priority for the recently formed ASTM International Committee E56 on Nanotechnology is the development of a globally relevant, industry-driven terminology standard. In an effort to facilitate this objective, ASTM International has signed partnership agreements with the Institute of Electrical & Electronics Engineers (IEEE), the American Society of Mechanical Engineers (ASME), NSF…, Attendance Encouraged at Open Meetings and Workshop, Interested individuals are encouraged to attend the next meeting of Committee E56, which will take place May 16-18, 2005, in Reno, Nev., at the Hilton Reno Resort. Following the meetings, on May 19, at the same hotel, Committee E56 will cosponsor a Workshop on Characterization of Nanomaterials for Medical and Health Applications. The workshop will provide a structured venue to address critical…
-
ASTM International, one of the largest voluntary standards development organizations in the world, announced the formation of a new committee to develop international consensus standards, definitions, terminology, and procedures covering nanotechnology. A branch of science and engineering that deals with things smaller than 100 nanometers (1 nm equals one-billionth of a meter), nanotechnology may…, An early priority for Committee E56 is the development of a globally relevant, industry-driven terminology standard for nanotechnology. In an effort to facilitate this objective, ASTM has signed partnership agreements with the Institute of Electrical & Electronics Engineers (IEEE), the American Society of Mechanical Engineers (ASME), and NSF International. These agreements focus solely on the…
-
A new ASTM standard developed by Committee F17 on Plastic Piping Systems will be an important step in advancing the use of high density polyethylene pipe in municipal storm sewer applications. The standard, F 2306, Specification for 12 to 60 in. (300 to 1500 mm) Annular Corrugated Profile Wall Polyethylene (PE) Pipe and Fittings for Gravity Flow Storm Sewer and Subsurface Drainage Applications,…
-
ASTM International Task Group D01.42.20 is soliciting participants to conduct a round robin to evaluate the precision of ASTM standard D 4446, Test Method for Anti-Swelling Effectiveness of Water-Repellent Formulations and Differential Swelling of Untreated Wood When Exposed to Liquid Water Environments. This standard is commonly known as the wood swellometer test and is widely used by…