Search
Advanced search
Filter by category
Filter by committee
Search results
-
ASTM International’s particle and spray characterization committee ( E29 ) is developing a proposed standard that will be used to measure physical and chemical properties of nanoparticles in a variety of industrial realms. The standard ( E3427 ) describes how to use laser-amplified detection/power spectrum analysis to measure the number of physical and chemical properties of nanoparticles,…, Media Inquiries:, Gavin O’Reilly, tel +1.610.832.9618; goreilly@astm.org, Committee Contact:, Jennifer Tursi, tel +1.610.832.9653; jtursi@astm.org Release #11790 ###
-
ASTM International’s committee on textiles ( D13 ) is developing a proposed standard for writing terminology in textile standards. “This practice is intended to address the importance of a ‘critical building block’ that is used to develop and construct a standard that has value and utility for many years,” says ASTM International member Vince Diaz. “If the terminology is vague or ambiguous, the…, Media Inquiries:, Gavin O’Reilly, tel +1.610.832.9618; goreilly@astm.org, Committee Contact:, Nora Nimmerichter, tel +1.610.832.9815; nnimmerichter@astm.org Release #11656 ###
-
ASTM International’s stormwater control measures committee ( E64 ) has developed a new standard on characteristics of sediments used in laboratory performance testing of stormwater treatment devices. The new standard, soon to be published as E3317, describes the minerology, specific gravity, and particle size distributions (PSDs) of silica-based sediments used in the testing of these devices.…, Media Inquiries:, Dan Bergels, tel +1.610.832.9602; dbergels@astm.org, Committee Contact:, Frank McConnell, tel +1.610.832.9686; fmcconnell@astm.org Release #11574 ###
-
ASTM International announced today the Journal of Testing and Evaluation, the organization’s flagship journal, received an increased 2021 impact factor rating of 1.333, up 5.5% from the previous year. The impact factor is calculated each year by Clarivate Analytics and given to journals that appear in their database, Science Citation Index. Launched in 1973, the journal is a multi-disciplinary…, Media Inquiries:, Dan Bergels, tel +1.610.832.9602; dbergels@astm.org Release #11472 ###
-
A new ASTM International standard will provide a test method related to the trash capture performance of stormwater control measures. The standard ( E3332 ) was developed by ASTM’s committee on stormwater control measures ( E64 ). According to ASTM International member Greg Williams, this is the second standard developed by the committee, and is a big step towards establishing goals and…, Media Inquiries:, Dan Bergels, tel +1.610.832.9602; dbergels@astm.org, Committee Contact:, Frank McConnell, tel +1.610.832.9686; fmcconnell@astm.org Release #11470 ###
-
Particle size distribution is an important factor in the manufacture of many products, from cement to perfume. A proposed ASTM International standard ( WK45240 ) will set out a general approach to the particle size distribution measurement of powders, suspensions, or slurries using an appropriate wet or dry methodology by the laser diffraction technique. ASTM’s committee on particle and spray…
-
A proposed ASTM International standard test method will cover the determination of maturity, fineness, ribbon width, and specific surface area (micronaire) of cotton fibers. ASTM International’s textiles committee ( D13 ) is developing the proposed standard. This test method ( WK75782 ) focuses on cotton fibers from a loose, chemically untreated sample taken before harvest, during ginning,…, Media Inquiries:, Jaime Martorana, tel +1.610.832.9796; jmartorana@astm.org, Committee Contact:, Nora Nimmerichter, tel +1.610.832.9815; nnimmerichter@astm.org Release #11267 ###
-
ASTM International’s Board of Directors has approved the formation of a new technical committee on stormwater control measures ( E64 ). The approval comes after an organizational meeting for the new committee happened in early October. The organizational meeting brought an array of stormwater industry experts together to identify specific standards needs and to determine the need for an ASTM…, Media Inquiries:, Jaime Martorana, tel +1.610.832.9796; jmartorana@astm.org, Committee Contact:, Frank McConnell, tel +1.610.832.9686; fmcconnell@astm.org Release #11130 ###
-
New stormwater management standards could support efforts to reduce pollution from stormwater runoff, create uniform testing, verification, and certification programs for stormwater control measures, unify varied stakeholders, and much more. Manufacturers, users, trade associations, professional societies, government agencies, consumer groups, academia, engineers, and testers are driving this…, Media Inquiries:, Dan Bergels, tel +1.610.832.9602; dbergels@astm.org , Activity Contact:, Frank McConnell, tel +1.610.832.9686; fmcconnell@astm.org Release #11084 ###
-
ASTM International’s smart textiles subcommittee (known as D13.50) has approved its first standard, a compilation of industry terms. “The textile industry is currently experiencing a renaissance with the development of novel and emerging materials that provide opportunities for new consumer applications and markets,” says ASTM International member Carole Winterhalter. “This new smart textile…, Media Inquiries:, Dan Bergels, tel +1.610.832.9602; dbergels@astm.org, Committee Contact:, Jennifer Rodgers, tel +1.610.832.9694; rwilhelm@astm.org Release #10850