Search
Advanced search
Filter by category
Filter by committee
Search results
-
ASTM International’s gaseous fuels committee ( D03 ) is developing a proposed standard that will help to verify the purity level of hydrogen fuel. Hydrogen fuel producers and testing laboratories will eventually be the primary users of the proposed standard ( WK89809 ). The test method will cover how gas chromatography and pulse discharge helium ionization detector (GC/PDHID) can be used to…, Media Inquiries:, Gavin O’Reilly, tel +1.610.832.9618; goreilly@astm.org, Committee Contact:, Brian Milewski, tel +1.610.832.9619; bmilewski@astm.org Release #11806 ###
-
ASTM International’s particle and spray characterization committee ( E29 ) is developing a proposed standard that will be used to measure physical and chemical properties of nanoparticles in a variety of industrial realms. The standard ( E3427 ) describes how to use laser-amplified detection/power spectrum analysis to measure the number of physical and chemical properties of nanoparticles,…, Media Inquiries:, Gavin O’Reilly, tel +1.610.832.9618; goreilly@astm.org, Committee Contact:, Jennifer Tursi, tel +1.610.832.9653; jtursi@astm.org Release #11790 ###
-
ASTM International’s personal protective clothing and equipment committee ( F23 ) has approved a new standard that will help improve the safety of protective clothing for healthcare professionals and others who come into contact with liquid drugs. The new standard ( F3267 ) establishes design, performance, documentation, and labeling requirements and provides test methods for protective clothing…, Media Inquiries:, Dan Bergels, tel +1.610.832.9602; dbergels@astm.org, Committee Contact:, Mary Mikolajewski, tel +1.610.832.9678; mmikolajewski@astm.org Release #11624 ###
-
, A new ASTM International standard developed by the gaseous fuels committee ( D03 ) provides a test method for the measurement of siloxanes and trimethylsilanol (TMSOL) in gaseous fuels. The standard ( D8455 ) addresses siloxanes and TMSOL as they are known to build up and cause various issues with fuels and gas-powered systems. This includes gas grids and elements of generating electricity such…, Media Inquiries:, Dan Bergels, tel +1.610.832.9602; dbergels@astm.org, Committee Contact:, Brian Milewski, tel +1.610.832.9619; bmilewski@astm.org Release #11536 ###, ,
-
ASTM International’s gaseous fuels committee ( D03 ) is developing a proposed standard that will help determine the presence of arsine in hydrocarbon gaseous fuels including renewable natural gas (RNG). Arsine is a toxic gas that is detrimental to fuel quality and can adversely impact public health if it is released into the atmosphere. According to ASTM International member Kevin Thind, the…
-
Particle size distribution is an important factor in the manufacture of many products, from cement to perfume. A proposed ASTM International standard ( WK45240 ) will set out a general approach to the particle size distribution measurement of powders, suspensions, or slurries using an appropriate wet or dry methodology by the laser diffraction technique. ASTM’s committee on particle and spray…
-
Today, members of ASTM International’s committee on personal protective clothing and equipment (F23) announced an upcoming informational webinar on the recently approved specification for barrier face coverings (F3502). The webinar will take place Monday, Feb. 22, 2021, from 1:00 – 2:00 PM ET via Zoom. The standard, which was published earlier this week in conjunction with a technical white…, Media Inquiries:, Dan Bergels, tel +1.610.832.9602; dbergels@astm.org Release #11188 ###
-
Today, global standards organization ASTM International approved a new standard for barrier face coverings that will help establish minimum design, performance, labeling, and care requirements for reusable barrier face coverings. The standard was developed by ASTM’s committee on personal protective clothing and equipment (F23). The new standard (F3502) is intended to apply to the general public…, Media Inquiries:, Dan Bergels, tel +1.610.832.9602; dbergels@astm.org Release #11187 ###
-
A new ASTM International standard test method will help improve the fit of particle-only air-purifying respirators, including filtering facepiece respirators, in an effort to ensure wearers have adequate protection. ASTM’s personal protective clothing and equipment committee ( F23 ) developed the standard, which is published as F3407 . “This standard provides detailed instructions for performing…, Media Inquiries:, Jaime Martorana, tel +1.610.832.9796; jmartorana@astm.org, Committee Contact:, Mary Mikolajewski, tel +1.610.832.9678; mmikolajewski@astm.org Release #11127 ###
-
ASTM International’s personal protective clothing and equipment committee ( F23 ) is developing a standard ( WK70964 ) that outlines a new way to evaluate flame-resistant clothing. According to members of the group, the proposed test method could help predict the potential for burn injuries for various materials used in garments and ensembles. ASTM International member Brian Shiels, a senior…, Media Inquiries:, Dan Bergels, tel +1.610.832.9602; dbergels@astm.org, Committee Contact:, Mary Mikolajewski, tel +1.610.832.9678; mmikolajewski@astm.org Release #10957