Search
Advanced search
Filter by category
Filter by committee
Search results
-
ASTM International’s particle and spray characterization committee ( E29 ) is developing a proposed standard that will be used to measure physical and chemical properties of nanoparticles in a variety of industrial realms. The standard ( E3427 ) describes how to use laser-amplified detection/power spectrum analysis to measure the number of physical and chemical properties of nanoparticles,…, Media Inquiries:, Gavin O’Reilly, tel +1.610.832.9618; goreilly@astm.org, Committee Contact:, Jennifer Tursi, tel +1.610.832.9653; jtursi@astm.org Release #11790 ###
-
ASTM International’s committee on textiles ( D13 ) is developing a proposed standard for writing terminology in textile standards. “This practice is intended to address the importance of a ‘critical building block’ that is used to develop and construct a standard that has value and utility for many years,” says ASTM International member Vince Diaz. “If the terminology is vague or ambiguous, the…, Media Inquiries:, Gavin O’Reilly, tel +1.610.832.9618; goreilly@astm.org, Committee Contact:, Nora Nimmerichter, tel +1.610.832.9815; nnimmerichter@astm.org Release #11656 ###
-
ASTM International announced today the Journal of Testing and Evaluation, the organization’s flagship journal, received an increased 2021 impact factor rating of 1.333, up 5.5% from the previous year. The impact factor is calculated each year by Clarivate Analytics and given to journals that appear in their database, Science Citation Index. Launched in 1973, the journal is a multi-disciplinary…, Media Inquiries:, Dan Bergels, tel +1.610.832.9602; dbergels@astm.org Release #11472 ###
-
Particle size distribution is an important factor in the manufacture of many products, from cement to perfume. A proposed ASTM International standard ( WK45240 ) will set out a general approach to the particle size distribution measurement of powders, suspensions, or slurries using an appropriate wet or dry methodology by the laser diffraction technique. ASTM’s committee on particle and spray…
-
ASTM International’s concrete pipe committee ( C13 ) has approved a new standard that will help in manufacturing circular concrete pipe that is installed using pipe jacking techniques. The type of pipe covered by the new standard is typically used to convey sewage, industrial wastes, stormwater, or utilities. Engineers, precast concrete pipe manufacturers, and jacking contractors will be the…
-
A proposed ASTM International standard test method will cover the determination of maturity, fineness, ribbon width, and specific surface area (micronaire) of cotton fibers. ASTM International’s textiles committee ( D13 ) is developing the proposed standard. This test method ( WK75782 ) focuses on cotton fibers from a loose, chemically untreated sample taken before harvest, during ginning,…, Media Inquiries:, Jaime Martorana, tel +1.610.832.9796; jmartorana@astm.org, Committee Contact:, Nora Nimmerichter, tel +1.610.832.9815; nnimmerichter@astm.org Release #11267 ###
-
New ASTM International Standard Is First for Testing Corrosion Effects in Manufacturing of AdditivesA new standard developed by ASTM International’s concrete pipe committee ( C13 ) is the first standard test for determining the effectiveness of antimicrobial additives on the corrosion of concrete. “This standard presents test methods to help determine effects of biogenic acidification on concrete products and/or the efficacy of antimicrobial products to resist microbially-induced corrosion in…, Media Inquiries:, Jaime Martorana, tel +1.610.832.9796; jmartorana@astm.org, Committee Contact:, Jimmy Farrell, tel +1.610.832.9661; jfarrell@astm.org Release #11124 ###
-
A new ASTM International standard will serve as a guide for standards related to determining the effects of biogenic sulfuric acid on concrete products. ASTM’s concrete pipe committee approved the standard, which is soon to be published as C1894. According to ASTM International member Mel Marshall, the new standard fills the need for a guide that discusses microbially induced corrosion (MIC) of…, Media Inquiries:, Dan Bergels, tel +1.610.832.9602; dbergels@astm.org, Committee Contact:, Jimmy Farrell, tel +1.610.832.9661; jfarrell@astm.org Release #10898
-
ASTM International’s smart textiles subcommittee (known as D13.50) has approved its first standard, a compilation of industry terms. “The textile industry is currently experiencing a renaissance with the development of novel and emerging materials that provide opportunities for new consumer applications and markets,” says ASTM International member Carole Winterhalter. “This new smart textile…, Media Inquiries:, Dan Bergels, tel +1.610.832.9602; dbergels@astm.org, Committee Contact:, Jennifer Rodgers, tel +1.610.832.9694; rwilhelm@astm.org Release #10850
-
A new ASTM International standard will help manufacturers of particulates, such as sand, gravel, and grit, to better measure their products. According to ASTM International member Paul O’Brien, engineering manager at JM Canty, the new guide explains a way to correlate different types of instruments that measure solid-particle distributions. Using the new standard will help expand the capability…, Media Inquiries:, Dan Bergels, tel +1.610.832.9602; dbergels@astm.org, Committee Contact:, Molly Lynyak, tel +1.610.832.9743; mlynyak@astm.org Release #10674