Search
Advanced search
Filter by category
Filter by committee
Search results
-
ASTM International’s committee on waste management ( D34 ) is seeking volunteers to help create five new standards related to waste treatment, recovery, and reuse (subcommittee D34.03)., Classification for Degradable Materials and Products (WK56175), This guide will help classify products based on how they degrade. It will support greater consistency and clarity for people who buy, sell, and use materials and products that claim to have certain degradation characteristics. In particular, the standard could help purchasing managers, waste-management operators, sustainability managers, and product managers., Guide for Operating an Anaerobic Digestion Facility (WK56176), Anaerobic digestion of organic waste, an alternative to composting, is gaining popularity for a number of reasons (e.gs., energy from biogas, avoiding fugitive leachate, improving life cycle analysis reporting). With more anaerobic digesters entering the market, there is a need for standards to measure degradation within these digesters. This new guide could help maximize safety and performance…, Practice for Estimating the Environmental Persistence of Materials Using First Order Rate Constant Calculations (WK56177), Experts working in waste management, environmental sciences, and chemical production need to know how long a product will remain intact and whether it will accumulate over time. This standard will help them estimate how long a material will remain in a specific environment, allowing them to better understand its long-term impact on the environment. Specifically, the standard provides a way to…, Guide for Materials Intended for Discard into Municipal Waste Water Treatment Facilities (WK57010), Some products are frequently discarded into wastewater systems. The guide will help determine whether a material will have a neutral, positive, or negative impact on wastewater systems. This will help companies better understand how their products degrade and choose environmentally-friendly materials., Guide for Materials Intended for Discard into Municipal Landfills (WK57011), Some products are frequently discarded into municipal landfills. The guide will help determine whether a material will have a neutral, positive, or negative impact on landfills. This will help companies better understand how their products degrade and choose environmentally-friendly materials. In addition, the standard could help waste operators determine what kinds of materials they allow to…, Committee on Waste Management (D34) Next Meeting:, April 24-27, 2017, Las Vegas, Media Inquiries:, Dan Bergels, tel +1.610.832.9602; dbergels@astm.org, Technical Contact:, Teresa Clark, ENSO Plastics, Mesa, Ariz., tel +1.623.242.2313; teresa.clark@ensoplastics.com, ASTM Staff Contact:, Brian Milewski, tel +1.610.832.9619; bmilewski@astm.org Release #10265
-
By request from industry, ASTM International will host an organizational meeting to potentially create a new technical committee that develops voluntary consensus standards for cannabis. The no-fee meeting is Tuesday, Feb. 28, at 9 a.m. EST at ASTM International’s global headquarters in, West Conshohocken, Pa., USA. Industry stakeholders and others interested in charting a path towards voluntary…, ASTM Cannabis Organizational Meeting:, Feb. 28, 2017, ASTM International, 100 Barr Harbor Drive, West Conshohocken, PA, 19428-2959 USA, Media Inquiries:, Nate Osburn, tel +1.610.832.9603; nosburn@astm.org, ASTM Staff Contact:, Christine DeJong, tel +1.610.832.9736; cdejong@astm.org Release #10251
-
ASTM International’s committee on waste management ( D34 ) recently launched work on three proposed new standards. Anyone with an interest in waste management is invited to join the work on the following proposed standards, which are being developed by a subcommittee that focuses on treatment, recovery and reuse (D34.03). Guide for Creating Product Specific Waste Hierarchy (WK55328) This proposed…, Media Inquiries:, Dan Bergels, tel +1.610.832.9602; dbergels@astm.org, Technical Contact:, Teresa Clark, ENSO Plastic, Mesa, Ariz., tel +1.623.242.2313; teresa.clark@ensoplastics.com, ASTM Staff Contact:, Brian Milewski, tel +1.610.832.9619; bmilewski@astm.org Release #10213
-
Two of the world’s leading organizations in consumer safety have teamed up to host a free workshop Thursday, Oct. 13, in Washington, D.C. For the agenda, click here . Panelists will review data from information and education campaigns that cover various consumer products. These campaigns relate to pool safety, off-road vehicles, window coverings, and other products. Discussions will focus on…, About ICPHSO, Founded in 1993, ICPHSO is the only organization which attracts a global membership of health and safety professionals and meets annually to exchange ideas, share information, and address health and safety concerns affecting all consumers. ICPHSO members represent U.S. and global government agencies, manufacturers, importers, retailers, trade associations, certification/testing laboratories, law…, About ASTM International, Over 12,000 ASTM standards operate globally. Defined and set by us, they improve the lives of millions every day. Combined with our innovative business services, they enhance performance and help everyone have confidence in the things they buy and use – from the toy in a child’s hand to the aircraft overhead. Working across borders, disciplines, and industries we harness the expertise of over 30…, Media Inquiries:, Dan Bergels, tel +1.610.832.9602; dbergels@astm.org , or Marc Schoem, tel 301.774.3020; mschoem@icphso.org . Release #10173
-
John Eichenlaub, chief operating officer at Builders Fence Company, Inc. in Sun Valley, CA., has been named chairman of ASTM International Committee F14 on Fences. Formed in 1973, F14 includes 6 subcommittees that oversee more than 45 standards related to fences, fence systems and related materials used to manufacture them. Eichenlaub has been a member of the committee and ASTM International…, Media Inquiries:, Dan Bergels, tel +1.610.832.9602; dbergels@astm.org Release #10021
-
An ASTM International committee is creating a standard to support the emergence of a geosynthetic material that is increasingly used in soil erosion protection and other construction projects. All interested parties are invited to participate in this effort (WK49719, Test Method for Determining the Flexural Strength of a Geosynthetic Cementitious Composite Mat (GCCM) Using the Three-Point Bending…, ASTM Committee D35 on Geosynthetics Next Meeting:, June 29-July 1, 2016, June Committee Week, Chicago, Ill., Media Inquiries:, Nathan Osburn, tel +1.610.832.9603; nosburn@astm.org, Technical Contact: John, Paulson, Dison Supply LLC, Atlanta, Ga., tel +1.770.851.6090; jnptut@aol.com , ASTM Staff Contact:, Katerina Koperna, tel +1.610.832.9728; kkoperna@astm.org Release #10006
-
Events Include USTDA-Sponsored Workshop, Rare Earth Materials Workshop and RoHS Roundtable, ASTM International Committee F40 on Declarable Substances in Materials conducted its biannual standards development meetings on March 10-11, 2014, at Thermo Fisher Scientific’s facilities in Shanghai, China. The meeting included both standards development work and special presentations. ASTM staff and F40 members participated in other events related to declarable substances in China, including…, F40 Meeting, Committee F40 is currently developing three proposed new standards, which were discussed in the Shanghai meeting: • ASTM WK26792, Guide for Identification of Declarable Substances in Polymeric Materials; • ASTM WK21957, Test Method for Identification and Quantification of Lead in Paint and Other Coatings Using Energy Dispersive X-Ray Spectrometry (EDXRF); and • ASTM WK44003, Test Method for…, New Chemical Substance Workshop, Members of F40 participated in the U.S.-China Provisions on the Environmental Administration of New Chemical Substances workshop held in Shanghai on March 12. The workshop was organized by ASTM International in cooperation with the American National Standards Institute on behalf of the U.S. Trade and Development Agency. More than 30 participants from different regions of China, as well as from…, Rare Earth Materials Workshop, On March 13, F40 held a Rare Earth Materials workshop. Gao Lan, secretary general, Standardization Administration of China’s TC229 on Rare Earth Metals, provided an overview of TC229’s work, while Taco van der Marten, chairman of ASTM Subcommittee F40.04 on Rare Earth Materials, described the history and current activities of the subcommittee. The workshop also featured a presentation by Kevin…, RoHS Roundtable, Alyson Fick, ASTM staff manager for F40, spoke at a March 17 event held by the American Chamber of Commerce, China division, in Beijing. The roundtable on restriction of hazardous substances (RoHS) standards provided the opportunity for China-based U.S.-funded companies to understand ASTM standards that consider RoHS issues. Also speaking at that roundtable were Weibing Xing, chief engineer,…, Sinopec Visit, In addition to the F40 meetings and events, Fick, along with ASTM China office representatives Liu Fei and Nancy Hu, visited the polymers and plastic building product division of Sinopec Petroleum in Beijing. This division uses many standards under the jurisdiction of ASTM International Committee D20 on Plastics . The ASTM staff provided an overview of ASTM and D20 to 20 attending engineers. A…, ASTM Committee F40 Next Meeting:, Nov. 12-14, 2014, New Orleans, La., ASTM Staff Contact:, Alyson Fick, Phone: 610-832-9710; afick@astm.org , ASTM PR Contact:, Barbara Schindler, Phone: 610-832-9603; bschindl@astm.org Release #9634
-
ASTM Committee F40 on Declarable Substances in Materials will convene its next business meetings in the People’s Republic of China in March 2014. The four-day session will include participation from 20 to 25 international technical committee experts who represent global manufacturers of products that incorporate identified hazardous materials restricted by legislation. Representatives from 15…, F40.01 Test Methods:, The development of standard test methods related to declarable substances in materials and products to assist manufacturing supply chains in various industries with compliance requirements. Key standards include: • ASTM F2617 , Test Method for Identification and Quantification of Chromium, Bromine, Cadmium, Mercury and Lead in Polymeric Material Using Energy Dispersive X-Ray Spectrometry (EDXRF…, F40.02 Management Practices and Guides, : Establish standards for the management of information for the declaration via paper or electronic means of substances in materials. Key Standards include: • ASTM F2577 , Guide for Assessment of Materials and Products for Declarable Substances • ASTM F2931 , Guide for Analytical Testing of Substances of Very High Concern in Materials and Products, F40.03 Monitoring and Research of Legislation and Regulations, F40.04 Rare Earth Materials, : Development of standards for rare earth materials, with an initial focus on material recycling, reuse and recapture as well as physical characterization and terminology. Key Work Items include: • ASTM WK44003, Test Method for Identification and Quantification of Rare Earth Elements (REEs) in Rare Earth Materials (REMs) by X-Ray Fluorescence Spectrometry ASTM encourages all interested…, ASTM Committee F40 Next Meeting:, March 10-13, 2014, Shanghai, China, ASTM Staff Contact:, Alyson Fick, Phone: 610-832-9710; afick@astm.org , ASTM PR Contact:, Barbara Schindler, Phone: 610-832-9603; bschindl@astm.org Release #9545
-
Rare earth elements and rare earth materials are common in a wide variety of products, from cell phones to electric cars and beyond. Thus, REEs and REMs have become a critical component in the economies of many developing countries. Specifications and test methods are needed to determine if the purchased quality of REEs and REMs meets the specified quality. One such proposed standard is ASTM…, ASTM Committee F40 Next Meeting:, March 10-13, 2014, Shanghai, China, Technical Contact:, Taco van der Maten, PANalytical, Almelo, The Netherlands, Phone: +31-546-534-372; taco.van.der.maten@panalytical.com, ASTM Staff Contact:, Alyson Fick, Phone: 610-832-9710; afick@astm.org , ASTM PR Contact:, Barbara Schindler, Phone: 610-832-9603; bschindl@astm.org Release #9527
-
Bisphenol A, or BPA, is a high production volume chemical widely used in manufacturing polycarbonate plastics and epoxy resins that are used in many industries. Procedures described in a new ASTM International standard will be used for measuring BPA concentration in environmental media such as soils, sludges and biosolids. The new standard, ASTM D7858 , Test Method for Determination of Bisphenol…, ASTM Committee D34 Next Meeting:, Virtual meeting, Oct. 10-11, 2013, Technical Contact:, Lawrence Zintek, Ph.D., U.S. Environmental Protection Agency, Region 5 Chicago Regional Laboratory, Chicago, Ill., Phone: 312-886-2925; zintek.lawrence@epa.gov, ASTM Staff Contact:, Alyson Fick, Phone: 610-832-9710; afick@astm.org, ASTM PR Contact:, Barbara Schindler, Phone: 610-832-9603; bschindl@astm.org Release #9456