Search
Advanced search
Filter by category
Filter by committee
Search results
-
Air permits from regulatory agencies, such as the U.S. Environmental Protection Agency (USEPA), often require the measurement of a plume's opacity as the plume is emitted from a stationary point source (for example, smokestacks) in the outdoor ambient environment. While such opacity is often visually measured by human observers as “certified smoke readers,” an opacity measurement method using…
-
ASTM Committee E10 on Nuclear Technology and Applications has approved two new ASTM standards, ASTM E2628 , Practice for Dosimetry for Radiation Processing, and ASTM E2701 , Guide for Performance Characterization of Dosimeters and Dosimetry Systems for Use in Radiation Processing. Both standards are under the jurisdiction of Subcommittee E10.01 on Radiation Processing: Dosimetry and Applications…, ASTM Committee E10 Next Meeting:, Jan. 24-27, January committee week, San Antonio, Texas, Technical Contact:, (E2628) John Logar, Ethicon Inc., Somerville, N.J., Phone: 908-218-5638; jlogar8@its.jnj.com ; (E2701) Rod Chu, Ottawa, Ontario, Canada, Phone: 613-565-2305; rodchu@rogers.com, ASTM Staff Contact:, Joe Koury, Phone: 610-832-9804; jkoury@astm.org, ASTM PR Contact:, Barbara Schindler, Phone: 610-832-9603; bschindl@astm.org Release #84 58/Jan2010
-
The measurement of acid mist is becoming increasingly important due to recent actions taken by the U.S. Environmental Protection Agency on fine particles (2.5 micrometers in diameter and smaller) that are unhealthy to breathe. ASTM International Committee D22 on Air Quality is currently working on a proposed standard for measuring acid mists that come from combustion sources, WK22846 , Test…
-
A new ASTM International standard provides guidance for using data generated by ASTM standards in testing for asbestos in surface dust. ASTM D 7390 , Guide for Evaluating Asbestos in Dust on Surfaces by Comparison Between Two Environments, was approved by ASTM International Committee D22 on Air Quality, part of Subcommittee D22.07 on Sampling and Analysis of Asbestos. According to James Millette…
-
A proposed new standard is being developed for the industrial radiation processing industry and irradiation research facilities where absorbed-dose measurement is critical. The proposed standard, WK15409 , Practice for Dosimetry in Radiation Processing, is under the jurisdiction of Subcommittee E10.01 on Radiation Processing: Dosimetry and Applications, which is part of ASTM International…
-
A new ASTM International standard will provide a method to consistently address indoor air quality complaints in residential buildings and to guide IAQ investigations in an efficient manner. The standard, D 7297 , Practice for Evaluating Residential Indoor Air Quality Concerns, is under the jurisdiction of Subcommittee D22.05 on Indoor Air, part of ASTM International Committee D22 on Air Quality…
-
Questions raised at a dosimetry symposium in 1998 have led to the development of a proposed new ASTM International standard, WK13464 , Guide for Performance Characterization of Dosimeters for Use in Radiation Processing. WK13464 is under the jurisdiction of Subcommittee E10.01 on Radiation Processing: Dosimetry and Applications, part of ASTM International Committee E10 on Nuclear Technology and…
-
Laboratories that measure fibers in workplace samples will be the most likely users of two new ASTM International standards: D 7200 , Practice for Sampling and Counting Airborne Fibers, Including Asbestos Fibers, in Mines and Quarries, by Phase Contrast Microscopy and Transmission Electron Microscope; and D 7201 , Practice for Sampling and Counting Airborne Fibers, Including Asbestos Fibers, in…
-
A proposed new standard currently being developed by ASTM International Committee F01 on Electronics will prove to be useful to the tantalum sputtering target industry. The proposed standard, WK9490, Test Method for Reporting Crystallographic Orientation of Sputtering Target Materials, is under the jurisdiction of Subcommittee F01.17 on Sputter Metallization. "The tantalum sputtering target…
-
ASTM International Committee F01 on Electronics is currently developing a proposed new standard that will provide uniformity in the values reported for oxygen content in aluminum alloys used for sputtering targets in the manufacture of integrated circuits. The proposed standard, WK9120, Determination of Oxygen in High Purity Aluminum and Alloys in High Purity Aluminum Base by Inert Gas Fusion…