Search
Advanced search
Filter by category
Filter by committee
Search results
-
ASTM International’s commercial spaceflight committee ( F47 ) has approved a new standard that will be used to help classify spacecraft vehicle types. The new standard ( F3388 ) will be useful to space launch and reentry vehicle manufacturers and existing or prospective spaceports that are planning new facilities or support for new vehicles. “The new standard will enable dialogue between launch…, Media Inquiries:, Gavin O’Reilly, tel +1.610.832.9618; goreilly@astm.org, Committee Contact:, Katerina Koperna, tel +1.610.832.9728; kkoperna@astmm.org Release #11783 ###
-
ASTM International has announced a new eLearning program focused on usage of a standard practice for Remote ID Means of Compliance ( F3586 ) developed by ASTM’s unmanned aircraft committee (F38). This standard practice acts as an overlay of requirements to the ASTM standard for Remote ID and tracking (F3411). The program will support manufacturers and producers of remote ID systems for unmanned…, Media Inquiries:, Gavin O’Reilly, tel +1.610.832.9618; goreilly@astm.org Release #11753 ###
-
ASTM International’s composite materials committee ( D30 ) is developed two proposed standards that will have direct practical applications for new-built infrastructure. Both proposed standards are relevant to alternative non-metallic materials that are applied to concrete structures for civil and infrastructure uses. “These proposed standards will help further implement non-metallic materials,…, Media Inquiries:, Gavin O’Reilly, tel +1.610.832.9618; goreilly@astm.org, Committee Contact:, Melissa Marcinowski, tel +1.610.832.9626; mmarcinowski@astm.org Release #11734 ###
-
ASTM International announced the graduate student winners of four $10,000 scholarships for their studies in fields where technical standards play a crucial role. This year’s winners were chosen from a competitive pool of various applicants. The following candidates will receive the 2023 ASTM International graduate scholarships:, Clara Eichler, is a Ph.D. student in environmental sciences and engineering at the University of North Carolina-Chapel Hill. Clara is an active member on D22.05 with interest in working for EPA or NIST to help contribute to advancing research and standards in her field., Md Abir Hossain, is a Ph.D. student in mechanical and aerospace engineering at Ohio State University. Md Abir has used published research using ASTM fatigue and fracture standards, and plans to continue to use them as he pursues a career as a tenured university professor. , Diana Wyman, is a Ph.D. student in fiber and polymer science at North Carolina State University. Diana is a previous winner of this scholarship award who once again impressed the review team with her active engagement and contributions to the work of Committee D13., Omid Vakili, is a Ph.D. student in biomedical physiology and kinesiology at Simon Fraser University (Canada). Omid is also a past award winner from 2021, and now an active member within the F08 and F24 committees with a primary focus on safety. ASTM International has more than 5,000 student members at all levels of education who pay nothing for membership. The organization offers several scholarship and grant…, Media Inquiries:, Gavin O’Reilly, tel+ 1.610.832.9618; goreilly@astm.org, Academic Outreach Contact: , Travis Murdock, tel+ 1.610.832.9714; tmurdock@astm.org Release #11690 ###
-
ASTM International’s commercial spaceflight committee ( https://www.astm.org/get-involved/technical-committees/committee-f47 F47 ) is developing a proposed standard ( https://www.astm.org/workitem-wk86387 WK86387 ) that introduces a new practice for safe operating practices in space for space fission reactors used for nuclear power and propulsion. “The proposed application relates to the design…, Media Inquiries:, Gavin O’Reilly, tel +1.610.832.9618; goreilly@astm.org, Committee Contact:, Katerina Koperna, tel +1.610.832.9728; kkoperna@astm.org Release #11682 ###
-
ASTM International’s composite materials committee ( D30 ) has developed a new standard specification for the latest generation of fiber reinforced polymer (FRP) bars. FRP bars are used as internal concrete reinforcement. According to ASTM International member Francisco De Caso, this new standard (D8505) is a milestone after several decades of collaboration to further integrate these composites…, Media Inquiries:, Gavin O’Reilly, tel +1.610.832.9618; goreilly@astm.org, Committee Contact:, Melissa Marcinowski, tel +1.610.832.9626; mmarcinowski@astm.org Release #11664 ###
-
ASTM International’s commercial spaceflight committee ( F47 ) has approved a new standard that will aid spaceports in developing descriptions of their sites and capabilities, including location and contact information. The new standard will soon be published as F3610. According to ASTM member Mark Greby, the standard will lead to spaceport descriptions that will provide potential customers and…, Media Inquiries:, Gavin O’Reilly, tel +1.610.832.9618; goreilly@astm.org, Committee Contact:, Katerina Koperna, tel +1.610.832.9728; kkoperna@astm.org Release #11663 ###
-
ASTM International’s committee on textiles ( D13 ) is developing a proposed standard for writing terminology in textile standards. “This practice is intended to address the importance of a ‘critical building block’ that is used to develop and construct a standard that has value and utility for many years,” says ASTM International member Vince Diaz. “If the terminology is vague or ambiguous, the…, Media Inquiries:, Gavin O’Reilly, tel +1.610.832.9618; goreilly@astm.org, Committee Contact:, Nora Nimmerichter, tel +1.610.832.9815; nnimmerichter@astm.org Release #11656 ###
-
Today, Wohlers Associates, powered by ASTM International, announced the release of Wohlers Report 2023 . This year’s report takes a deep dive into the growth of the additive manufacturing (AM) industry, with insights from 10 industry sectors. New content includes an examination of large format AM applications, including aerospace and construction, as well as a look at the growing number of AM…, Media Inquiries:, Gavin O’Reilly, tel +1.610.832.9618; goreilly@astm.org Release #11646 ###
-
ASTM International’s Additive Manufacturing Center of Excellence (AM CoE) will host an in-person workshop to support the development of its Roadmap for Advanced Technologies for the Digitalization of the Construction Industry. The workshop, sponsored by the National Institute of Standards and Technology (NIST), will take place Jan. 25–26, 2023, at ASTM’s global headquarters in West Conshohocken,…, Advanced Technologies, : Additive manufacturing, robotics and automation, big data, Internet of Things, artificial intelligence, simulation, augmented reality, and cybersecurity, Key Applications, : Sustainable buildings, smart infrastructures, mass housing, disaster response, pandemic preparedness, and construction in space. Workshop attendance will be limited. To ensure a range of perspectives are included in the roadmap, interested stakeholders are invited to participate in a brief survey . For more information on the workshop, including an agenda, visit https://amcoe.org/event/…, About the AM CoE, The AM CoE is a collaborative partnership representing industry, government, and academia to conduct strategic R&D to advance AM standardization. The center also aims to accelerate development and adoption of AM by developing training and certification programs, and providing market intelligence, business strategy, and advisory services through Wohlers Associates, powered by ASTM…, About ASTM International, Committed to serving global societal needs, ASTM International positively impacts public health and safety, consumer confidence, and overall quality of life. We integrate consensus standards – developed with our international membership of volunteer technical experts – and innovative services to improve lives… Helping our world work better., AM COE Media Contact:, Tessa Sulkes, tel +1.610.832.9677; tsulkes@astm.org Release #11585 ###