Search
Advanced search
Filter by category
Filter by committee
Search results
-
While a variety of ASTM International standards currently exist for the testing of thermoplastic pavement marking materials, there has been a need to develop practices that address both the proper sampling methods and the correct way to prepare a sample prior to testing. These needs have recently been met with the approval of two new ASTM standards, D 7307 , Practice for Sampling of Thermoplastic…
-
Manufacturers of preservatives and antifouling paints will be able to use a new ASTM International standard to evaluate the quality of their products by comparing biocide leach rates in one formulation against a competitive product or their own products. The new standard, D 6903 , Test Method for Determination of Organic Biocide Release Rate from Antifouling Coatings in Substitute Ocean Water,…
-
A new ASTM International standard, E 2555 , Practice for Factors and Procedures for Applying the MIL-STD-105 Plans in Life and Reliability Inspection, represents the latest work of a task group that is converting a series of old U.S. Department of Defense standards into ASTM documents. The task group is part of Subcommittee E11.30 on Data Analysis, which is under the jurisdiction of ASTM…
-
A proposed new standard being developed by ASTM International Committee D01 on Paint and Related Coatings, Materials and Applications would provide the coatings industry with an industry-wide method for evaluating the ability of an architectural paint system to block ink stains from typical markers and writing instruments from bleeding through primer or base-coat into a topcoat. The proposed…
-
ASTM International Committee D01 on Paint and Related Coatings is seeking participation from interested parties in developing a proposed new standard, WK12492 , Practice for Rheological Characterization of Architectural Coatings Using Three Common Bench Viscometers. The proposed standard covers a popular industry protocol and includes general guidelines for predicting some coatings performance…
-
ASTM International Committee E11 on Quality and Statistics has approved a new practice that describes methods for proficiency testing providers to use in analyzing laboratory results obtained in their programs. The standard, E 2489 , Practice for Statistical Analysis of One-Sample and Two-Sample Interlaboratory Proficiency Testing Programs, is under the jurisdiction of Subcommittee E11.20 on Test…
-
A new ASTM International standard, F 2490 , Guide for Aircraft Electrical Load and Power Source Capacity Analysis, has been accepted by the Federal Aviation Administration (FAA) as a means of compliance with 14 CFR 23.1351(a) (2), Electrical System Capacity for Part 23 (and Predecessor) Aircraft. Guide F 2490 was developed by Subcommittee F39.01 on Design, Alteration, and Certification, which is…
-
A proposed new standard currently being developed by ASTM International Committee F01 on Electronics will prove to be useful to the tantalum sputtering target industry. The proposed standard, WK9490, Test Method for Reporting Crystallographic Orientation of Sputtering Target Materials, is under the jurisdiction of Subcommittee F01.17 on Sputter Metallization. "The tantalum sputtering target…
-
ASTM International Committee D01 on Paint and Related Coatings, Materials and Applications will hold its annual mini-symposium on Jan. 24, 2006, at the Embassy Suites Hotel in Ft. Lauderdale, Fla. The focus of the sessions will be on the role and use of statistics in the development of standard test methods, with emphasis on recent developments. The following three lectures will be given during…, Statistical Requirements Inside and Outside ASTM International, Many coatings and raw material manufacturers have registered to the ISO 9002 standard. That standard has been replaced by ISO 9001:2000, with the requirements for the new standard being more extensive. However, some of the new requirements can be met by using basic statistical techniques. This presentation, which will be given by Robert Morrison, is an overview of the new requirements and compare…, The Use of Ranked vs. Rated Data in the Evaluation of Weathered Specimens or Material, The evaluation of specimens after weathering can be handled by a number of approaches; two of these are rating and ranking. Rating requires one to compare the specimens against a scale (i.e., 1 to 10). Ranking, on the other hand, requires the direct comparison of the specimens against each other. Louis Asher will make this presentation, which will center on these two approaches and will…, ASTM International Interlaboratory Study Program, ASTM International recently approved a new Interlaboratory Study Program. Through this program, ASTM is providing staff support and financial resources to technical committees by offering assistance with the identification of participating laboratories, overseeing the generation of sample distribution, collecting data, and generating precision and bias statements and research reports. This…
-
ASTM International Committee F01 on Electronics is currently developing a proposed new standard that will provide uniformity in the values reported for oxygen content in aluminum alloys used for sputtering targets in the manufacture of integrated circuits. The proposed standard, WK9120, Determination of Oxygen in High Purity Aluminum and Alloys in High Purity Aluminum Base by Inert Gas Fusion…