Search
Advanced search
Filter by category
Filter by committee
Search results
-
Consumers who are purchasing building materials for homes want to be assured that the materials are mold resistant. A proposed new ASTM standard will allow for a mold-resistance rating to be given to specific materials, depending on how the materials perform to the test method. The proposed new standard, ASTM WK32079 , Test Method for Determination of Mold Growth on Building Products Designed for…
-
Corrosion inhibitors are used extensively for pipelines in the oil and gas industry. Subcommittee G01.05 on Laboratory Corrosion Tests has been developing a series of standards on performance testing of corrosion inhibitors, including the most recently approved: ASTM G202 , Test Method for Using Atmospheric Pressure Rotating Cage. Subcommittee G01.05 is part of ASTM International Committee G01 on…
-
While standards for outdoor calibration techniques for solar radiometers exist, there are currently no general standards that deal with issues of indoor calibration transfers between radiometers of different design. A proposed new ASTM standard, ASTM WK27263, Test Method for Indoor Transfer of Calibration from Reference to Field Pyranometers, will address in detail issues associated with…
-
Rapid hardening hydraulic cements are used in a variety of applications in which reduced cementitious contents are desired or early service is needed. Included among these applications are paving, construction, stucco, mortar and block. A newly approved ASTM International standard covering these cements, ASTM C1600/C1600M , Specification for Rapid Hardening Hydraulic Cement, has been developed by…, Type URH, —ultra rapid hardening, for use where ultra high early strength is desired;, Type VRH, —very rapid hardening, for use where very high early strength is desired;, Type MRH, —medium rapid hardening, for use where mid-range rapid hardening, high early strength is desired; and, Type GRH, —general rapid hardening, for use when the higher strength properties of Type VRH or a Type MRH cement is not required. “ASTM C1600 lists minimum requirements for compressive strength, setting time, shrinkage and soundness (autoclave expansion),” says Hicks. “Optional specifications for sulfate expansion, alkali silicate reactions with aggregates, heat of hydration and expansion in water are also…
-
Localized corrosion, such as pitting, cracking or crevice corrosion, can be destructive to process equipment, but if it is detected early enough, potential damage can be minimized or avoided. A new ASTM International standard provides a means for electrochemical testing for corrosion. The new standard, G199 , Guide for Electrochemical Noise Measurement, was developed by Subcommittee G01.11 on…
-
Explorations into alternative forms of energy have increased interest in standards for solar energy applications. ASTM International Committee G03 on Weathering and Durability has recently approved a new standard in this area, G197 , Table for Reference Solar Spectral Distributions: Direct and Diffuse on 20° Tilted and Vertical Surfaces. ASTM G197 was developed by Subcommittee G03.09 on…
-
Automotive companies and interior suppliers will be the primary users of a proposed new ASTM International standard that will aid in testing of automotive interior materials and parts, draperies or other applications in which durability behind glass is desired. The proposed standard, WK16895 , Practice for Conducting Exposures in Outdoor Glass-Covered Exposure Apparatus with Air Recirculation, is…
-
A recently approved revision to ASTM International standard C 150 , Specification for Portland Cement, includes three significant technical changes to the document. The changes are part of a joint effort between ASTM and the American Association of State and Highway and Transportation Officials to harmonize C 150 with AASHTO’s standard, M 85, Specification for Portland Cement. C 150 is under the…
-
ASTM International Subcommittee G01.10 on Corrosion in Soils will be conducting two round robin testing procedures on Tuesday, November 14, from 9:00 a.m. to 3:00 p.m. during ASTM meetings in Atlanta, Ga. One round robin will be for the development of a new standard test method to measure the oxidation-reduction potential (redox) of soils, while the other will address precision and bias for the 4…
-
ASTM International Committee G01 on Corrosion of Metals has an ongoing commitment to help the oilfield and refinery industries adopt and use state-of-the-art techniques to select corrosion inhibitors. As part of this commitment, two new standards developed by Subcommittee G01.05 on Laboratory Corrosion Tests have recently been published: G 184, Practice for Evaluating and Qualifying Oilfield and…