Search
Advanced search
Filter by category
Filter by committee
Search results
-
Lee Dilks, consultant for LDAnalytical in Lahaska, Pennsylvania, USA, was honored with the H. V. Churchill Award by ASTM International’s committee on analytical chemistry for metals, ores and related materials (E01). Dilks, an ASTM International member since 1992, was recognized for greatly contributing to the content of committee standards by providing consistent support of interlaboratory…, Media Inquiries:, Dan Bergels, tel +1.610.832.9602; dbergels@astm.org Release #10697
-
A new ASTM International guide responds to a decades-long need to enhance safety surrounding protective coating systems at nuclear power plants. The new standard (soon to be published as D8104, Guide for Determining Coating Qualification Test Data Applicability) was developed by ASTM International’s committee on protective coating and lining work for power generation facilities ( D33 ). According…, Media Inquiries:, Dan Bergels, tel +1.610.832.9602; dbergels@astm.org, Technical Contact:, Jon R. Cavallo, PE, tel +1.603.767.8650; jrcpe@aol.com, ASTM Staff Contact:, Joseph Hugo, tel +1.610.832.9740; jhugo@astm.org R elease #10288
-
A new ASTM International standard provides a method for analyzing the composition of aluminum and aluminum alloys. The test helps manufacturers, consumers, and laboratories verify that an alloy’s composition is within the needed limits through an analysis method called “inductively coupled plasma atomic emission spectrometry” (ICP-AES). “The composition of an aluminum alloy is one factor that…, ASTM Committee E01 on Analytical Chemistry for Metals, Ores, and Related Materials Next Meeting:, May 7-9, 2017, May Committee Week, Toronto, Ontario, Canada, Media Inquiries:, Dan Bergels, tel +1.610.832.9602; dbergels@astm.org, Technical Contact:, Jeneé Jacobs, Arconic, New Kensington, Pa., tel +1.724.337.2490; jenee.jacobs@arconic.com, ASTM Staff Contact:, Thomas O’Toole, tel +1.610.832.9739; totoole@astm.org R elease #10283
-
After two successful pilots, ASTM International, a global standards organization, is expanding its Emerging Professionals program . The program will provide free airfare and lodging this year for up to 24 participants to attend a leadership development workshop held during an ASTM International conference – “committee week” – where technical experts in their industries create and revise…, ASTM Staff Contact:, Katerina Koperna, tel +1.610.832.9728; kkoperna@astm.org , Media Inquiries:, Dan Bergels, tel +1.610.832.9602; dbergels@astm.org R elease #10276
-
Dirk Roller, Ph.D., the director of Quality EMEA and the Reference Lab for Orion Engineered Carbons in Cologne, Germany, was honored with the Jeff Melsom Distinguished Service Award from ASTM International Committee D24 on Carbon Black ( D24 ). Roller joined ASTM in 2004, and was rewarded for his outstanding leadership and contributions in developing new test methods and advancing the technical…, Media Inquiries:, Dan Bergels, tel +1.610.832.9602; dbergels@astm.org Release #10227
-
ASTM International will hold an organizational meeting to potentially create a new technical committee that develops voluntary consensus standards for the recycled vulcanized rubber industry. This includes both rubber and carbon black and has many practical applications including use in plastics, strengthening concrete, and infill for playgrounds. This, online meeting, is Wednesday, October 5 2016, at 10:00am EDT. Industry stakeholders and other parties interested in charting a path towards standardization for this industry are welcome to attend. Consensus standards could set a bar for this growing industry resulting in high-quality practices and products used worldwide. The objectives of the meeting are to: • bring a range of industry experts together…, ASTM Recycled Vulcanized Rubber Meeting:, Wednesday, 5 October 2016 at 10:00am (Eastern); online (Webex) meeting, Media Inquiries:, Dan Bergels, tel +1.610.832.9602; dbergels@astm.org, ASTM Staff Contact:, Joe Koury, tel +1.610.832.9804; jkoury@astm.org Release #10165
-
ASTM is launching a new subcommittee that will develop test methods and specifications for coatings and linings used in hydroelectric power plants. The new group is part of the Committee on Protective Coatings and Lining Work for Power Generation Facilities ( D33 ). Subcommittee D33.13 on Protective Coatings and Linings for Hydroelectric Power Generation Facilities will address abrasion,…, ASTM Committee D33 on Protective Coatings and Lining Work for Power Generation Facilities Next Meeting:, July 20–21, 2016, West Conshohocken, Pa., Media Inquiries:, Dan Bergels, tel +1.610.832.9602; dbergels@astm.org, Technical Contact:, Allen Skaja, U.S. Bureau of Reclamation, Lakewood, Colo., tel +1.303.445.2396; askaja@usbr.gov, ASTM Staff Contact:, Joe Hugo, tel +1.610.832.9740; jhugo@astm.org Release #10113
-
ASTM International has fully redesigned its International Laboratory Directory, the only directory in the world dedicated to helping manufacturers find the right labs to test their products. Independent laboratories throughout the world rely on thousands of standards and test methods, including many developed by ASTM International. By working with these labs, manufacturers can help ensure that…, Contact:, Anna Spektor, tel +1.610.832.9756; aspektor@astm.org, Media Inquiries:, Dan Bergels, tel +1.610.832.9602; dbergels@astm.org Release #10110
-
A proposed ASTM standard will fill the need for a test method to analyze nickel alloys, which are used for jet-engine components, oil and gas drilling, and many other industries. Once approved, the proposed standard (WK40596, Test Method for the Analysis of Nickel Alloys by Spark Atomic Emission Spectrometry) will help suppliers, customers and testing labs that work with nickel alloys. Spark…, ASTM Committee E01 on Analytical Chemistry for Metals, Ores and Related Materials Next Meeting:, May 1-4, 2016, May Committee Week, San Antonio, Texas, Media Inquiries:, Nathan Osburn, tel +1.610.832.9603; nosburn@astm.org, Technical Contact:, Patrick Cole, ATI Specialty Materials, Monroe N.C., tel +1.704.289.4511 ext. 1317; pat.cole@ATImetals.com , ASTM Staff Contact:, Thomas O’Toole, tel +1.610.832.9739; totoole@astm.org Release #9967
-
A new ASTM test method will provide a simple and effective way to determine the tensile (pulling) and compressive (pushing) stress for metallic coatings used on a wide range of consumer products such as pens, doorknobs, lamps, cars, jewelry and more. The standard will also be used in the automotive, aerospace and military industries, particularly by companies that create metallic layers for parts…, ASTM Committee B0 8 on Metallic and Inorganic Coatings Next Meeting:, May 5, 2016, May Committee Week, San Antonio, Texas, Media Inquiries:, Nathan Osburn, tel +1.610.832.9603; nosburn@astm.org, Technical Contact:, Frank H. Leaman, Specialty Testing and Development Company Inc., York, Pa., tel +1.717.891.4989; fleaman@specialtytest.com , ASTM Staff Contact:, Diane Lake, tel +1.610.832.9661; dlake@astm.org Release #9964