Search
Advanced search
Filter by category
Filter by committee
Search results
-
A new ASTM International subcommittee has been created to develop standards that will be meaningful and accurate performance indicators to measure work-related injury and illness performance throughout the world. Subcommittee E34.55 on Occupational Safety and Health Performance Improvement is under the jurisdiction of ASTM International Committee E34 on Occupational Health and Safety. “Measuring…
-
ASTM International Committee D03 on Gaseous Fuels recently approved two new standards for the hydrogen fuel industry: ASTM D7650 , Test Method for Sampling of Particulate Matter in High Pressure Hydrogen Used as a Gaseous Fuel with an In-Stream Filter, and ASTM D7651 , Test Method for Gravimetric Measurement of Particulate Concentration of Hydrogen Fuel. Subcommittee D03.14 on Hydrogen and Fuel…
-
A new ASTM International standard will provide how-to information to consultants and contractors for assessing the condition of a roof to be coated and recommendations on how to prepare a roof for a coating. The new standard, ASTM D7120 , Guide for Evaluation and Preparation of Roof Membranes for Coating Application, was developed by Subcommittee D08.20 on Roofing Membrane Systems, part of ASTM…, ASTM Committee D08 Next Meeting:, June 12-15, 2011, June Committee Week, Anaheim, Calif., Technical Contact:, Carter Slusher, Firestone Building Products, Indianapolis, Ind., Phone: 317-575-7117; slushercarter@firesonebp.com, ASTM Staff Contact:, Joseph Hugo, Phone: 610-832-9740; jhugo@astm.org, ASTM PR Contact:, Barbara Schindler, Phone: 610-832-9603; bschindl@astm.org Release #8721
-
A new ASTM subcommittee seeks to acknowledge the ongoing advances being made in the field of nanostructured inorganic coatings. B08.16 on Nanostructured Coatings, part of ASTM International Committee B08 on Metallic and Inorganic Coatings, is currently developing its first proposed standard, ASTM WK29468 , Specification for Galvanic Protection of Steel Using a Nanostructured Coating of 95 % Zinc…
-
The ongoing focus on sustainability in construction has contributed to greater interest in vegetative, or green, roof systems, in which traditional roofing material is replaced or supplemented with vegetation. A proposed new ASTM International standard will address an important aspect of designing this kind of roofing: determining the proper roofing and waterproofing membrane for a particular…
-
ASTM International Committee D03 on Gaseous Fuels invites all interested parties to participate in their standards developing activities. Proposed new standards currently being developed by subcommittees within D03 include ASTM WK24874, Test Method for the Determination of Moisture Vapor Concentration in Natural Gas and by Tunable Diode Laser Spectroscopy (TDLAS), and ASTM WK24875 , Practice for…, Tunable Diode Laser Spectroscopy, The proposed new standard, ASTM WK24874 , is being developed at the request of several gas companies that use TDLAS analyzers for the measurement of moisture in natural gas. While TDLAS has become a popular type of gas analysis, no specific standard currently exists for its use. ASTM WK24874 is under the jurisdiction of Subcommittee D03.12 on On-Line/At-Line Analysis of Gaseous Fuels. According…, Siloxanes, While biofuel from landfills and sewage digestion has been used as fuel for local gas turbine engines, it is necessary to hold the content of siloxanes within the fuel down to 50 parts per billion. Siloxanes that can coat the turbine under working conditions are converted to an abrasive silicone dioxide coating that greatly reduces the lifetime of the engine. ASTM WK24875 is currently being…
-
ASTM International Subcommittee E34.50 on Health and Safety Standards for Metalworking Fluids has developed three new standards. Two of the recently approved ASTM standards cover aspects of water-miscible metalworking fluids, while the third concerns prevention of dermatitis in the wet metal removal fluid environment., Prevention of Dermatitis, Dermatitis is an inflammatory response of the skin to a chemical or physical agent. While redness, swelling and itching are typical signs of dermatitis, symptoms can be more severe as well. A new ASTM standard, ASTM E2693 , Practice for Prevention of Dermatitis in the Wet Metal Removal Fluid Environment, discusses dermatitis and its causes and presents a comprehensive approach to dermatitis…, Metalworking Fluids, Two new E34.50 standards address the detection of microbial contamination in metalworking fluids: ASTM E2657 , Test Method for Determination of Endotoxin Concentrations in Water-Miscible Metalworking Fluids, and ASTM E2694 , Test Method for Measurement of Adenosine Triphosphate in Water-Miscible Metalworking Fluids. Both ASTM E2657 and ASTM E2694 measure biological contamination in metalworking…, Participation Invited, The subcommittee is currently looking for participants for an interlaboratory study for ASTM E2657 and ASTM E2694 . “We plan to use a single set of MWF for both standards, so labs who are interested in either or both are welcome to participate,” says Passman. “A few labs will run both the ILS’s for both standards, while most will run one or the other.” Subcommittee E34.50 is part of ASTM…
-
Sulfur compounds are known for their smell, but odor isn’t the only issue sulfur compounds create, at least when found in various kinds of gas. Too much sulfur in gaseous fuels, such as natural gas, petroleum gases and biogases, can be corrosive to equipment, result in regulatory issues, and can inhibit or destroy catalysts used in gas processing and utilization equipment. However, sulfur gases…
-
When fasteners penetrate roofing or waterproofing products as a planned part of installation, it is expected in some cases that the product will resist water migration at the point of penetration. A new ASTM International standard, D7349 , Test Method for Determining the Capability of Roofing and Waterproofing Materials to Seal Around Fasteners, addresses this situation. ASTM D7349 was developed…
-
Modified bitumen products have been in use since the mid-1970s, and represent a substantial percentage of the commercial asphalt roofs installed throughout North America. A new ASTM International standard addresses the use of cold process adhesives in modified bitumen roofing systems. ASTM D7379 , Test Methods for Strength of Modified Bitumen Sheet Material Laps Using Cold Process Adhesive, was…