Search
Advanced search
Filter by category
Filter by committee
Search results
-
All interested parties are welcome to join in the ongoing revisions to ASTM D3953 , Specification for Strapping, Flat Steels and Seals. The standard is under the jurisdiction of Subcommittee D10.25 on Palletizing and Unitizing of Loads , part of ASTM International Committee D10 on Packaging . According to its scope, ASTM D3953 covers flat steel strapping and seals intended for use in closing,…, ASTM Committee D10 Next Meeting:, April 15-17, 2013, April Committee Week, Indianapolis, Ind., Technical Contact:, Anthony Mariano, Independent Metal Strap Co. Inc., East Hill, N.Y., Phone: 516-621-0030; amariano@indmetalstrap.com, ASTM Staff Contact:, Diane Trinsey, Phone: 610-832-9661; dtrinsey@astm.org, ASTM PR Contact:, Barbara Schindler, Phone: 610-832-9603; bschindl@astm.org Release #9309
-
All interested parties, particularly end users, resin manufacturers and film converters, are invited to participate in the revision of ASTM International standard ASTM D4649 , Guide for Selection and Use of Stretch Wrap Films. The standard is being updated by Subcommittee D10.25 on Palletizing and Unitizing of Loads , part of ASTM International Committee D10 on Packaging . ASTM D4649 covers…, ASTM Committee D10 Next Meeting:, April 14-17, 2013, April Committee Week, Indianapolis, Ind., Technical Contact:, James V. Bisha, Ph.D., Ongweoweh Corp, Cayuga Heights, N.Y., Phone: 607-266-7070; jbisha@ongweoweh.com, ASTM Staff Contact:, Diane Trinsey, Phone: 610-832-9661; dtrinsey@astm.org, ASTM PR Contact:, Barbara Schindler, Phone: 610-832-9603; bschindler@astm.org Release #9287
-
An important ASTM engine coolant standard, ASTM D3321 , Test Method for Use of the Refractometer for Field Test Determination of the Freezing Point of Aqueous Engine Coolants, has recently been revised to reflect advances in engine coolant technology used in modern engines. ASTM D3321 is under the jurisdiction of Subcommittee D15.03 on Physical Properties , part of ASTM International Committee…, ASTM Committee D15 Next Meeting:, May 21-22, 2013, May Committee Week, Indianapolis, Ind., Technical Contact:, Frederick C. Alverson, Shell Global Solutions, Houston, Texas, Phone: 281-544-9217; frederick.alverson@shell.com, ASTM Staff Contact:, Joe Koury, Phone: 610-832-9804; jkoury@astm.org, ASTM PR Contact:, Barbara Schindler, Phone: 610-832-9603; bschindl@astm.org R elease #9274
-
A proposed ASTM standard will be useful in covering the level of defects that exist in hot rolled rod coil. The proposed standard, ASTM WK37796 , Specification for General Requirements for Hot Rolled Rod Coil, is being developed by Subcommittee B02.07 on Refined Nickel and Cobalt and Their Alloys , part of ASTM International Committee B02 on Nonferrous Metals and Alloys . According to Larry Paul…, ASTM Committee B02 Next Meeting:, Nov. 12-14, 2012, November Committee Week, Atlanta, Ga., Technical Contact:, Larry Paul, ThyssenKrupp VDM USA, LLC, Peru, Ind., Phone: 765-689-0215; larry.paul@thyssenkrupp.com, ASTM Staff Contact:, Jeffrey Adkins, Phone: 610-832-9738; jadkins@astm.org, ASTM PR Contact:, Barbara Schindler, Phone: 610-832-9603; bschindl@astm.org R elease #9286
-
The creation of new nickel base alloys in pipe and tube forms, used in the oil and power industries, was the driving force for developing a new ASTM International standard, ASTM B983 , Specification for Precipitation Hardened or Cold Worked, Seamless Nickel Alloy Pipe and Tube. ASTM B983 was developed by Subcommittee B02.07 on Refined Nickel and Cobalt and Their Alloys , part of ASTM…
-
Interested parties are invited to participate in the development of a proposed new ASTM International standard that will, once approved, facilitate consistent test methods and more reproducible results in hazardous materials package testing. The proposed new standard, ASTM WK32937 , Guide for Determining Acceptable Nonhazardous Filling Substances for Packagings Subjected to the United Nations…
-
Adding Another Level of Safety in Patient Care ASTM Subcommittee D10.32 on Consumer, Pharmaceutical and Medical Packaging has recently completed an significant revision to ASTM D4774 , Specification for User Applied Drug Labels in Anesthesiology, and approved a new standard, ASTM D7709 , Test Methods for Measuring Water Vapor Transmission Rate (WVTR) of Pharmaceutical Bottles and Blisters.…
-
ASTM International Committee D15 on Engine Coolants has formed three new subcommittees: Subcommittees D15.22 on Non-Aqueous Coolants ; D15.25 on Diesel Exhaust Fluid ; and D15.30 on Industrial Heat Transfer Fluids . All interested parties are invited to join in the standards developing activities of these new subcommittees., D15.22, Non-Aqueous Coolants, While there has been an increased interest in non-aqueous coolants industry, there are no current ASTM standards in this area. D15.22 will begin to develop such standards. “The envisioned standards for non-aqueous coolants would be performance standards, rather than ingredient standards, to allow for formulations that are not currently proprietary,” says Jonathan T. Light, chief engineer, Evans…, D15.25, Diesel Exhaust Fluid, Diesel exhaust fluid, often referred to as DEF, is required by many diesel engine-powered vehicles delivered after January 2010. More recent environmental standards issued by the U.S. Environmental Protection Agency have created more stringent emissions standards for agricultural, construction and forestry equipment. DEF is used to reduce nitrogen oxide emissions, which allows original equipment…, D15.30, Industrial Heat Transfer Fluids, Members of D15 recognized that changes in the antifreeze industry, including new manufacturing technologies, improved inhibitor chemistries and recycling technologies, would likely be adapted to the facilities industry as a natural course of innovation. Because D15 has experience developing standards that are technically similar to the facilities heat transfer industry, it was deemed appropriate…, ASTM Committee D15 Next Meeting:, May 17-18, May Committee Week, Anaheim, Calif., Technical Contact:, (D15.22) Jonathan T. Light, Evans Cooling Systems Inc., Sharon, Conn., Phone: 860-435-2418; jtlight@comcast.net ; (D15.25) Edward Eaton Sr., Amalgatech, Phoenix, Ariz., Phone: 602-252-0280; edeaton@amalgatech.com ; (D15.30) John Panasewicz, Clear Choice Antifreeze, Henderson, Colo., Phone: 303-227-9900; johnp@clearchoiceantifreeze.com, ASTM Staff Contact:, Joe Koury, Phone: 610-832-9804; jkoury@astm.org, ASTM PR Contact:, Barbara Schindler, Phone: 610-832-9603; bschindl@astm.org Release #8837
-
ASTM International Committee B02 on Nonferrous Metals and Alloys is currently working on a proposed new ASTM International standard for zinc alloys being used for spin casting. The proposed standard, ASTM WK30745 , Specification for Zinc Alloys for Spin Casting, is being developed by Subcommittee B02.04 on Zinc and Cadmium. According to Bernard Potts, president of Village Casting Inc., and a…
-
ASTM International Committee D10 on Packaging will conduct a workshop on Packaging on Oct. 12 from 1:00 to 5:30 p.m. CDT at the Grand Hyatt San Antonio in San Antonio, Texas. The workshop will be held during the standards development meetings of Committee D10. Following a welcome by Marilyn Baker, senior innovation consultant in global quality, The Coca-Cola Co., and a current member of ASTM…