Search
Advanced search
Filter by category
Filter by committee
Search results
-
Committee F10 on Livestock, Meat, and Poultry Evaluation Systems invites all interested parties to join in the standards developing activities of a new task group on radio frequency identification (RFID). The new task group, which is under the jurisdiction of Subcommittee F10.20 on Device Performance Criteria, will have its first meeting Nov. 1 at the November Committee Week in Tampa, Fla. The…
-
Interested parties are invited to participate in the ongoing development of a proposed new standard, WK15543 , Test Method for Determining Fatigue Failure of Compacted Asphalt Concrete Subjected to Repeated Flexural Bending. The proposed standard is being developed by Subcommittee D04.26 on Fundamental/Mechanistic Tests, which is part of ASTM International Committee D04 on Road and Paving…
-
Two new standards have recently been approved by ASTM International Committee D04 on Road and Paving Materials. The standards, both of which are under the jurisdiction of Subcommittee D04.26 on Fundamental/Mechanistic Tests, are D 6931 , Test Method for Indirect Tensile (IDT) Strength of Bituminous Mixtures, and D 7312 , Test Method for Determining the Permanent Shear Strain and Complex Shear…, ASTM D 6931, Test Method for Indirect Tensile (IDT) Strength of Bituminous Mixtures, The withdrawal of D 4123 , Test Method for Indirect Tension Test for Resilient Modulus of Bituminous Mixtures, led to the development of D 6931 , since D 4123 contained a description of an indirect tensile strength test that was referred to in several other standards. It was decided to develop this test into a completely separate standard, D 6931, to stand on its own merit as a method that…, ASTM D 7312, Test Method for Determining the Permanent Shear Strain and Complex Shear Modulus of Asphalt Mixtures Using the Superpave Shear Tester (SST), According to Rebecca McDaniel, technical director, North Central Superpave Center, and leader of the D 7312 task group, Superpave is a system for designing asphalt mixtures to ensure that the right asphalt binder and aggregate structure is used for the traffic and climate where it will be placed on the road. To facilitate the implementation of Superpave, the Federal Highway Administration…
-
ASTM International Committee F41 on Unmanned Undersea Vehicle Systems invites all interested parties to participate in a new task group, F41.90.01 on Unmanned Surface Vehicles. With the addition of this new task group, the name of Committee F41 will be changed to Unmanned Maritime Systems. Task Group F41.90.01 is seeking new members with expertise in unmanned surface vehicles to complement the…
-
ASTM International Committee A01 on Steel, Stainless Steel and Related Alloys invites interested parties to participate in a revision and update of ASTM standard E 527 , Practice for Numbering Metals and Alloys (UNS). The standard is under the jurisdiction of the Committee A01 editorial subcommittee A01.91. E 527 provides the basis for the practice of the Unified Numbering System for all major…
-
ASTM International Subcommittee A01.19 on Sheet and Strip Steel has made three significant changes to ASTM standards under its jurisdiction. The changes are: • Reporting of boron levels made mandatory; • Changes to size limitations of general requirements and product standards for hot rolled material; and • Addition of grades 90 and 100 for hot rolled sheet and strip products. Subcommittee A01.19…, Boron Reporting, Boron is often added to low carbon steels to achieve lower hardness and increased formability; however, the mechanical properties of cold reduced and annealed material produced from hot rolled coils containing boron are affected by its presence. The differences may or may not be desired, but the effects are important and cold rolled steel manufacturers need to be informed of the presence of…, Size Limitation Changes, The general requirements for hot rolled sheet and strip products are spelled out in Standards A 568/A 568M , Specification for Steel, Sheet, Carbon, Structural, and High-Strength, Low Alloy, Hot-Rolled and Cold-Rolled, General Requirements for, and A 635/A 635M , Steel, Sheet and Strip, Heavy-Thickness Coils, Hot-Rolled, Carbon, Structural, High-Strength Low-Alloy, and High-Strength Low-Alloy…, Ultra-High Strength Steel Grades, ASTM standards A 1011/A 1011M and A 1018/A 1018M were changed to include grades with 90 and 100 ksi [620 and 690 MPa] minimum yield strength. These grades have the designation ultra-high strength (UHSS) as a way to differentiate them from the high strength low alloy with improved formability (HSLAS-F) designation. The UHSS grades may achieve their high strength by some measure of transformation…
-
A new ASTM International standard will provide paving contactors and producers with instructions for preparing cold mix asphalt samples for testing. The standard, D 7229 , Test Method for Preparation and Determination of the Bulk Specific Gravity of Dense-Graded Cold Mix Asphalt (CMA) Specimens by Means of the Superpave Gyratory Compactor, was developed by Subcommittee D04.27 on Cold Mix Asphalts…
-
The new online "Passport to Steel" now available from ASTM International provides the latest data on more than 50,000 steels with the ability to find comparable worldwide steel standards from organizations around the globe. Several search options, including product forms and alloy groups, make it easy to find needed information quickly. In addition, a Reference Center provides additional related…
-
, New ASTM Committee to Develop Standards That Will Facilitate New System Designs and Industry Growth, ASTM International, one of the largest voluntary standards development organizations (SDOs) in the world, today announced the formation of ASTM Committee F41 on Unmanned Undersea Vehicle (UUV) Systems. This important standards initiative was driven by the cooperative efforts of the United States Navy and UUV industry stakeholders to facilitate new UUV system designs and enable next-generation…, Critical Role in Oceanographic Research, Commercial and Military Applications, UUVs have a notable history dating back to the early 1980s. Early systems built on their manned submersible predecessors and helped transform oceanographic research during the decade. Used by the academic community in notable deep-sea expeditions, such as the discovery and exploration of the wreck of the Titanic, UUVs have played a critical role in ocean surveying, environmental monitoring, and…, UUV Growth and Evolution: ASTM Standards Will Help Lead the Way, Todays UUV industry includes two classes of systems: remotely operated vehicles (ROVs), which are attached to a mother-ship by a long cable; and autonomous underwater vehicles (AUVs), which operate without a tether. To better meet the challenges of emerging applications, existing UUV systems must evolve with new technology. Specific areas of need include greater interoperability among…, Fast and Efficient Standards Development Through the ASTM Process, Led by the Association for Unmanned Vehicle Systems International (AUVSI), the premier trade association for the unmanned systems industry, UUV stakeholders selected ASTM International as the SDO best suited for the development of new international industry standards. With a proven consensus process and state-of-the-art standards development infrastructure, ASTM International was best positioned…, Public/Private Sector Collaboration under the ASTM Umbrella, ASTM Committee F41 is another example of the long-standing partnership between the public and private sectors in developing consensus standards under the ASTM International process. F41 brings together technical experts from the UUV industry, federal government, trade associations and academia to develop voluntary consensus standards pertaining to UUV design, safety and performance including…
-
Most standard hardness tests for steel, including the Brinell, Vickers and various Rockwell tests, are generally classified as bench testers. This means that the component being tested needs to be taken to the machine for hardness to be determined. In order to test larger pieces, such as forgings, a section would need to be removed from the forging in order for it to be tested. Since this is not…