Search
Advanced search
Filter by category
Filter by committee
Search results
-
ASTM International’s particle and spray characterization committee ( E29 ) is developing a proposed standard that will be used to measure physical and chemical properties of nanoparticles in a variety of industrial realms. The standard ( E3427 ) describes how to use laser-amplified detection/power spectrum analysis to measure the number of physical and chemical properties of nanoparticles,…, Media Inquiries:, Gavin O’Reilly, tel +1.610.832.9618; goreilly@astm.org, Committee Contact:, Jennifer Tursi, tel +1.610.832.9653; jtursi@astm.org Release #11790 ###
-
ASTM International’s 3D imaging systems committee ( E57 ) is developing a proposed standard that will provide guidance for robotic bin-picking systems used for sorting, assembling, and packaging items in industrial environments. “Robotic bin-picking systems are becoming popular in many industrial applications,” says ASTM committee E57 vice-chair Kamel Saidi, Ph.D. “These systems are used for…
-
Particle size distribution is an important factor in the manufacture of many products, from cement to perfume. A proposed ASTM International standard ( WK45240 ) will set out a general approach to the particle size distribution measurement of powders, suspensions, or slurries using an appropriate wet or dry methodology by the laser diffraction technique. ASTM’s committee on particle and spray…
-
A proposed ASTM International standard is intended to focus on robotic assembly applications. ASTM’s 3D imaging systems committee ( E57 ) is developing the proposed standard ( WK72962 ), which should be the first in a series of standards on 3D, or depth perception, systems. According to ASTM International member John Sweetser, principal engineer, Intel Corp/Realsense Group, there are currently…, Media Inquiries:, Dan Bergels, tel +1.610.832.9602; dbergels@astm.org, Committee Contact:, Pat Picariello, tel +1.610.832.9720; ppicariello@astm.org Release #11033 ###
-
In light of COVID-19 (coronavirus) and growing safety concerns for members and staff, ASTM International announced today that previously scheduled April standards development meetings in Boston (March 29-April 3) and Prague (April 27-30) have been canceled. The decision was based on several factors, including, but not limited to: Continued review of information and recommendations from the U.S.…, Media Inquiries:, Dan Bergels, tel +1.610.832.9602; dbergels@astm.org Release #10993
-
A new ASTM International standard from its primary barrier packaging committee ( F02 ) aims to support the safety of liquid consumer products by testing restricted delivery devices (commonly known as “flow restrictors”) that help prevent children’s access. Flow restrictors are added to the neck of products such as bottles of medicine to control the release of liquid, according to Mark Plezia,…, Media Inquiries:, Dan Bergels, tel +1.610.832.9602; dbergels@astm.org, Committee Contact:, Jimmy Farrell, tel +1.610.832.9661; jfarrell@astm.org Release #10795
-
A new ASTM International standard will help owners of commercial properties make decisions on the selection and use of electric security fences. According to Jack DeMao, ASTM International member and chair of the organization’s task group on electric security fences, the new standard (F3296) will be the first to specifically address the use of electric security fencing in the commercial market…, Media Inquiries:, Dan Bergels, tel +1.610.832.9602; dbergels@astm.org, Committee Contact:, Joseph Hugo, tel +1.610.832.9740; jhugo@astm.org Release #10734
-
Correctional facilities could be made safer and more cost-effective by a new ASTM International standard on electric security fences ( F3297 ). The standard incorporates topics such as electrical pulses, design, and control systems. According to Jack DeMao, ASTM International member and chair of the organization’s task group on electric security fences, the new practice addresses using non-lethal…, Media Inquiries:, Dan Bergels, tel +1.610.832.9602; dbergels@astm.org, Committee Contact:, Joseph Hugo, tel +1.610.832.9740; jhugo@astm.org Release #10720
-
A new ASTM International standard will help manufacturers of particulates, such as sand, gravel, and grit, to better measure their products. According to ASTM International member Paul O’Brien, engineering manager at JM Canty, the new guide explains a way to correlate different types of instruments that measure solid-particle distributions. Using the new standard will help expand the capability…, Media Inquiries:, Dan Bergels, tel +1.610.832.9602; dbergels@astm.org, Committee Contact:, Molly Lynyak, tel +1.610.832.9743; mlynyak@astm.org Release #10674
-
ASTM International’s committee on particle and spray characterization ( E29 ) is working on a new standard that aims to reduce uncertainty from an existing test method (bubble point test) for woven wire filter cloth. The material, also known as Dutch weave, is used for general industrial filtration including separation of solids from fluids. The bubble point test determines the pressure at the…, Media Inquiries:, Dan Bergels, tel +1.610.832.9602; dbergels@astm.org, Committee Contact:, Molly Lynyak, tel +610.832.9743; mlynyak@astm.org Release #10657