Search
Advanced search
Filter by category
Filter by committee
Search results
-
ASTM International’s particle and spray characterization committee ( E29 ) is developing a proposed standard that will be used to measure physical and chemical properties of nanoparticles in a variety of industrial realms. The standard ( E3427 ) describes how to use laser-amplified detection/power spectrum analysis to measure the number of physical and chemical properties of nanoparticles,…, Media Inquiries:, Gavin O’Reilly, tel +1.610.832.9618; goreilly@astm.org, Committee Contact:, Jennifer Tursi, tel +1.610.832.9653; jtursi@astm.org Release #11790 ###
-
ASTM International’s waste management committee ( D34 ) has approved a new standard to analyze soils and biosolids for potential contamination from per- and polyfluoroalkyl substances (PFAS). “PFAS contamination is of growing concern around the world,” says ASTM member William Lipps, general manager, government and regulatory business development/international standards development, Shimadzu…, Media Inquiries:, Gavin O’Reilly, tel +1.610.832.9618; goreilly@astm.org, Committee Contact:, Brian Milewski, tel +1.610.832.9619; b milewski@astm.org Release #11741, ###
-
ASTM International’s waste management committee ( D34 ) is developing a proposed test method that focuses on detecting hazardous hydrocarbons in soil. According to ASTM International member Wesley McCall, the proposed standard ( WK84635 ) centers around use of a steel probe called an Optical Imaging Profiler (OIP). The probe is advanced into soils and unconsolidated materials using direct push…, Media Inquiries:, Dan Bergels, tel +1.610.832.9602; dbergels@astm.org, Committee Contact:, Brian Milewski, tel +1.610.832.9619; bmilewski@astm.org Release #11640, ###
-
Particle size distribution is an important factor in the manufacture of many products, from cement to perfume. A proposed ASTM International standard ( WK45240 ) will set out a general approach to the particle size distribution measurement of powders, suspensions, or slurries using an appropriate wet or dry methodology by the laser diffraction technique. ASTM’s committee on particle and spray…
-
A new ASTM International standard will be used to help measure the concentration of potentially hazardous surfactants that are used in consumer and industrial products. ASTM’s waste management committee ( D34 ) approved the new standard (D8310). According to ASTM International member Larry Zintek, chemicals covered in the new standard are released into the environment through direct use and down…, Media Inquiries:, Dan Bergels, tel +1.610.832.9602; dbergels@astm.org, Committee Contact:, Brian Milewski, tel +1.610.832.9619; bmilewski@astm.org Release #10992
-
A new ASTM International standard will help manufacturers of particulates, such as sand, gravel, and grit, to better measure their products. According to ASTM International member Paul O’Brien, engineering manager at JM Canty, the new guide explains a way to correlate different types of instruments that measure solid-particle distributions. Using the new standard will help expand the capability…, Media Inquiries:, Dan Bergels, tel +1.610.832.9602; dbergels@astm.org, Committee Contact:, Molly Lynyak, tel +1.610.832.9743; mlynyak@astm.org Release #10674
-
ASTM International’s committee on particle and spray characterization ( E29 ) is working on a new standard that aims to reduce uncertainty from an existing test method (bubble point test) for woven wire filter cloth. The material, also known as Dutch weave, is used for general industrial filtration including separation of solids from fluids. The bubble point test determines the pressure at the…, Media Inquiries:, Dan Bergels, tel +1.610.832.9602; dbergels@astm.org, Committee Contact:, Molly Lynyak, tel +610.832.9743; mlynyak@astm.org Release #10657
-
An update to a standard on woven wire filter cloth (sometimes called Dutch weave) aims to better meet the needs of the filtration industry. Members of the ASTM International committee on particle and spray characterization ( E29 ) changed the standard from a guide to a specification that notably includes material tolerances. Generally, filter cloth is made from metal or metal alloy wires which…, Media Inquiries:, Dan Bergels, tel +1.610.832.9602; dbergels@astm.org, Committee Contact:, Molly Lynyak, tel +1.610.832.9743; mlynyak@astm.org Release #10579
-
Pending approval from its board of directors, ASTM International announced yesterday the launch of a new committee focused on creating technical standards and guidance materials for cannabis and its products and processes. Yesterday, about 60 industry representatives, associations, and others convened at ASTM International’s global headquarters near Philadelphia and decided to create a volunteer…, Media Inquiries:, Nate Osburn, tel +1.610.832.9603; nosburn@astm.org, Committee Contact:, Robert Morgan, tel +1.610.832.9732; rmorgan@astm.org Release #10266
-
ASTM International’s committee on waste management ( D34 ) is seeking volunteers to help create five new standards related to waste treatment, recovery, and reuse (subcommittee D34.03)., Classification for Degradable Materials and Products (WK56175), This guide will help classify products based on how they degrade. It will support greater consistency and clarity for people who buy, sell, and use materials and products that claim to have certain degradation characteristics. In particular, the standard could help purchasing managers, waste-management operators, sustainability managers, and product managers., Guide for Operating an Anaerobic Digestion Facility (WK56176), Anaerobic digestion of organic waste, an alternative to composting, is gaining popularity for a number of reasons (e.gs., energy from biogas, avoiding fugitive leachate, improving life cycle analysis reporting). With more anaerobic digesters entering the market, there is a need for standards to measure degradation within these digesters. This new guide could help maximize safety and performance…, Practice for Estimating the Environmental Persistence of Materials Using First Order Rate Constant Calculations (WK56177), Experts working in waste management, environmental sciences, and chemical production need to know how long a product will remain intact and whether it will accumulate over time. This standard will help them estimate how long a material will remain in a specific environment, allowing them to better understand its long-term impact on the environment. Specifically, the standard provides a way to…, Guide for Materials Intended for Discard into Municipal Waste Water Treatment Facilities (WK57010), Some products are frequently discarded into wastewater systems. The guide will help determine whether a material will have a neutral, positive, or negative impact on wastewater systems. This will help companies better understand how their products degrade and choose environmentally-friendly materials., Guide for Materials Intended for Discard into Municipal Landfills (WK57011), Some products are frequently discarded into municipal landfills. The guide will help determine whether a material will have a neutral, positive, or negative impact on landfills. This will help companies better understand how their products degrade and choose environmentally-friendly materials. In addition, the standard could help waste operators determine what kinds of materials they allow to…, Committee on Waste Management (D34) Next Meeting:, April 24-27, 2017, Las Vegas, Media Inquiries:, Dan Bergels, tel +1.610.832.9602; dbergels@astm.org, Technical Contact:, Teresa Clark, ENSO Plastics, Mesa, Ariz., tel +1.623.242.2313; teresa.clark@ensoplastics.com, ASTM Staff Contact:, Brian Milewski, tel +1.610.832.9619; bmilewski@astm.org Release #10265