Search
Advanced search
Filter by category
Filter by committee
Search results
-
ASTM International’s particle and spray characterization committee ( E29 ) is developing a proposed standard that will be used to measure physical and chemical properties of nanoparticles in a variety of industrial realms. The standard ( E3427 ) describes how to use laser-amplified detection/power spectrum analysis to measure the number of physical and chemical properties of nanoparticles,…, Media Inquiries:, Gavin O’Reilly, tel +1.610.832.9618; goreilly@astm.org, Committee Contact:, Jennifer Tursi, tel +1.610.832.9653; jtursi@astm.org Release #11790 ###
-
Particle size distribution is an important factor in the manufacture of many products, from cement to perfume. A proposed ASTM International standard ( WK45240 ) will set out a general approach to the particle size distribution measurement of powders, suspensions, or slurries using an appropriate wet or dry methodology by the laser diffraction technique. ASTM’s committee on particle and spray…
-
ASTM International’s geosynthetics committee ( D35 ) has approved a new standard that will help engineers, designers, and specifiers who work with vinyl sheet piling. Applications for such piling include the construction of seawalls, retaining walls, and chemical cut-off walls. “The new specification will standardize the materials used and it will allow producers to meet the United States Army…
-
ASTM International’s geosynthetics committee ( D35 ) is developing a proposed standard that will help provide engineers with specific information for components necessary for road and pavement design. The proposed standard ( WK70888 ) outlines a commonly used test to characterize the performance of geosynthetics for roadway applications. Specifically, it describes the use of the cyclic plate load…
-
ASTM International’s geosynthetics committee ( D35 ) is developing a proposed standard that covers vinyl sheet piling used in marine and geotechnical fields for seawalls, retaining walls, flood walls, erosion control, and pollution cut-off. According to ASTM member Steve Hargrave, the proposed standard ( WK75165 ) will fill the need for a specification for vinyl sheet piling used for structural…, Media Inquiries:, Jaime Martorana, tel +1.610.832.9796; jmartorana@astm.org , Committee Contact:, Travis Murdock, tel +1.610.832.9826; tmurdock@astm.org Release #11185 ###
-
A new ASTM International standard aid engineers and specifiers looking to understand the quality and strength of cement contained in geosynthetic cementitious composite mats (GCCMs). ASTM’s geosynthetics committee developed the new standard, which is needed to allow for a consistent industry method for the application of compression strength in GCCMs. GCCMs are flexible concrete impregnated…, Media Inquiries:, Dan Bergels, tel +1.610.832.9602; dbergels@astm.org, Committee Contact:, Katerina Koperna, tel +1.610.832.9728; kkoperna@astm.org Release #11045 ###
-
In light of COVID-19 (coronavirus) and growing safety concerns for members and staff, ASTM International announced today that previously scheduled April standards development meetings in Boston (March 29-April 3) and Prague (April 27-30) have been canceled. The decision was based on several factors, including, but not limited to: Continued review of information and recommendations from the U.S.…, Media Inquiries:, Dan Bergels, tel +1.610.832.9602; dbergels@astm.org Release #10993
-
A proposed ASTM International standard will provide guidance for using geocells – open-celled geosynthetics that help hold soils and rocks in place – in roadway projects. Geocells are commonly used in road construction, earth retention, and other construction projects. According to ASTM International member Eli Cuelho, there is currently no standard for using geocells in geotechnical and…, Media Inquiries:, Dan Bergels, tel +1.610.832.9602; dbergels@astm.org, Committee Contact:, Katerina Koperna, tel +1.610.832.9728; kkoperna@astm.org Release #10955
-
A new ASTM International standard will help manufacturers of particulates, such as sand, gravel, and grit, to better measure their products. According to ASTM International member Paul O’Brien, engineering manager at JM Canty, the new guide explains a way to correlate different types of instruments that measure solid-particle distributions. Using the new standard will help expand the capability…, Media Inquiries:, Dan Bergels, tel +1.610.832.9602; dbergels@astm.org, Committee Contact:, Molly Lynyak, tel +1.610.832.9743; mlynyak@astm.org Release #10674
-
ASTM International’s committee on particle and spray characterization ( E29 ) is working on a new standard that aims to reduce uncertainty from an existing test method (bubble point test) for woven wire filter cloth. The material, also known as Dutch weave, is used for general industrial filtration including separation of solids from fluids. The bubble point test determines the pressure at the…, Media Inquiries:, Dan Bergels, tel +1.610.832.9602; dbergels@astm.org, Committee Contact:, Molly Lynyak, tel +610.832.9743; mlynyak@astm.org Release #10657