Search
Advanced search
Filter by category
Filter by committee
Search results
-
ASTM International’s engine coolants and related fluids committee ( D15 ) has approved a new test method that will be used to determine common organic additives in engine coolants. The new standard ( D8567 ) describes how high-performance liquid chromatography (HPLC) is used to analyze engine coolants for azoles and organic acids, which can affect performance. According to Henry Owusu, chair of…, Media Inquiries:, Gavin O’Reilly, tel +1.610.832.9618; goreilly@astm.org, Committee Contact:, Ashley Wiand, tel +1.610.832.9551; awiand@astm.org Release #11831 ###
-
ASTM International’s particle and spray characterization committee ( E29 ) is developing a proposed standard that will be used to measure physical and chemical properties of nanoparticles in a variety of industrial realms. The standard ( E3427 ) describes how to use laser-amplified detection/power spectrum analysis to measure the number of physical and chemical properties of nanoparticles,…, Media Inquiries:, Gavin O’Reilly, tel +1.610.832.9618; goreilly@astm.org, Committee Contact:, Jennifer Tursi, tel +1.610.832.9653; jtursi@astm.org Release #11790 ###
-
ASTM International’s engine coolants and related fluids committee ( D15 ) is developing two proposed standards that will be used to evaluate the ability of electric vehicle (EV) coolants to protect against corrosion. Coolants help regulate operating temperatures while providing protection against corrosion, freezing, and overheating. Coolants can come directly in contact with the vehicle fuel…, Media Inquiries:, Gavin O’Reilly, tel +1.610.832.9618; goreilly@astm.org, Committee Contact:, Ashley Wiand, tel +1.610.832.9551; awiand@astm.org Release #11702 ###
-
A newly approved standard from ASTM International’s recovered carbon black committee ( D36 ) provides a test that will help to differentiate products and provide a quality control tool for producers and users. Recovered carbon black (rCB) is a recycled product made from end-of-life tires. The new standard (soon to be published as D8474) describes a thermogravimetric (TGA) technique to determine…, Media Inquiries:, Dan Bergels, tel +1.610.832.9602; dbergels@astm.org, Committee Contact:, Melissa Marcinowski, tel +1.610.832.9626; mmarcinowski@astm.org Release #11602 ###
-
ASTM International’s recovered carbon black (rCB) committee ( D36 ) is developing a proposed standard that will be used to differentiate between different rCB products and provide quality control tool for producers and users. According to ASTM International member Pieter ter Haar, the proposed standard ( WK81244 ) will explain how thermogravimetry (TGA), a type of thermal analysis, can be used to…
-
Particle size distribution is an important factor in the manufacture of many products, from cement to perfume. A proposed ASTM International standard ( WK45240 ) will set out a general approach to the particle size distribution measurement of powders, suspensions, or slurries using an appropriate wet or dry methodology by the laser diffraction technique. ASTM’s committee on particle and spray…
-
In light of COVID-19 (coronavirus) and ongoing safety concerns for members and staff, ASTM International announced today that all previously scheduled in-person May standards development meetings (including independent meetings) have been canceled. Earlier this month, ASTM International announced the cancellation of all April in-person meetings . These decisions were based on several factors,…, Media Inquiries:, Dan Bergels, tel +1.610.832.9602; dbergels@astm.org Release #11001 ###
-
ASTM International’s committee on recovered carbon black ( D36 ), formed in 2017, has approved its first standard. The new standard ( D8178 ) defines important terms in the recovered carbon black (rCB) industry. ASTM International member Bill Cole notes that recovered carbon black is a relatively new, sustainable raw material product, produced by a new and growing industry, for use in rubber,…, Media Inquiries:, Dan Bergels, tel +1.610.832.9602; dbergels@astm.org, Committee Contact:, Joe Koury, tel +1.610.832.9804; jkoury@astm.org Release #10748
-
A new ASTM International standard will help manufacturers of particulates, such as sand, gravel, and grit, to better measure their products. According to ASTM International member Paul O’Brien, engineering manager at JM Canty, the new guide explains a way to correlate different types of instruments that measure solid-particle distributions. Using the new standard will help expand the capability…, Media Inquiries:, Dan Bergels, tel +1.610.832.9602; dbergels@astm.org, Committee Contact:, Molly Lynyak, tel +1.610.832.9743; mlynyak@astm.org Release #10674
-
ASTM International’s committee on particle and spray characterization ( E29 ) is working on a new standard that aims to reduce uncertainty from an existing test method (bubble point test) for woven wire filter cloth. The material, also known as Dutch weave, is used for general industrial filtration including separation of solids from fluids. The bubble point test determines the pressure at the…, Media Inquiries:, Dan Bergels, tel +1.610.832.9602; dbergels@astm.org, Committee Contact:, Molly Lynyak, tel +610.832.9743; mlynyak@astm.org Release #10657