Search
Advanced search
Filter by category
Filter by committee
Search results
-
ASTM International’s particle and spray characterization committee ( E29 ) is developing a proposed standard that will be used to measure physical and chemical properties of nanoparticles in a variety of industrial realms. The standard ( E3427 ) describes how to use laser-amplified detection/power spectrum analysis to measure the number of physical and chemical properties of nanoparticles,…, Media Inquiries:, Gavin O’Reilly, tel +1.610.832.9618; goreilly@astm.org, Committee Contact:, Jennifer Tursi, tel +1.610.832.9653; jtursi@astm.org Release #11790 ###
-
ASTM International’s composite materials committee ( D30 ) is developed two proposed standards that will have direct practical applications for new-built infrastructure. Both proposed standards are relevant to alternative non-metallic materials that are applied to concrete structures for civil and infrastructure uses. “These proposed standards will help further implement non-metallic materials,…, Media Inquiries:, Gavin O’Reilly, tel +1.610.832.9618; goreilly@astm.org, Committee Contact:, Melissa Marcinowski, tel +1.610.832.9626; mmarcinowski@astm.org Release #11734 ###
-
ASTM International’s composite materials committee ( D30 ) has developed a new standard specification for the latest generation of fiber reinforced polymer (FRP) bars. FRP bars are used as internal concrete reinforcement. According to ASTM International member Francisco De Caso, this new standard (D8505) is a milestone after several decades of collaboration to further integrate these composites…, Media Inquiries:, Gavin O’Reilly, tel +1.610.832.9618; goreilly@astm.org, Committee Contact:, Melissa Marcinowski, tel +1.610.832.9626; mmarcinowski@astm.org Release #11664 ###
-
ASTM International’s composite materials committee ( D30 ) is developing a proposed standard that will help define the test methods and specimens that should be used for bolted joint related properties. Many composite structures are assembled with mechanically fastened (“bolted”) joints. Structural analysis of these attachments requires a linked set of design properties that are generated by…, Media Inquiries:, Dan Bergels, tel +1.610.832.9602; dbergels@astm.org, Committee Contact:, Melissa Marcinowski, tel +1.610.832.9626; mmarcinowski@astm.org Release #11569 ###
-
ASTM International’s adhesives committee ( D14 ) has approved a new standard that will serve as a guideline for developing adhesive systems used in the installation of resilient flooring. The new standard ( D8397 ) establishes minimum requirements for adhesives used for installing resilient floor covering, within a climate-controlled structure, when adhered directly and permanently to a…, Media Inquiries:, Dan Bergels, tel +1.610.832.9602; dbergels@astm.org, Committee Contact:, Frank McConnell, tel +1.610.832.9686; fmcconnell@astm.org Release #11513 ###
-
ASTM International’s composite materials committee ( D30 ) is developing a proposed standard that will be used in the inspections of fiber-reinforced polymer (FRP) composite repairs to buildings and other civil structures. There are a number of overlapping standards and codes on FRP inspections. The proposed standard ( WK74694 ) will include the applicable current industry references, standards,…
-
Particle size distribution is an important factor in the manufacture of many products, from cement to perfume. A proposed ASTM International standard ( WK45240 ) will set out a general approach to the particle size distribution measurement of powders, suspensions, or slurries using an appropriate wet or dry methodology by the laser diffraction technique. ASTM’s committee on particle and spray…
-
In light of COVID-19 (coronavirus) and growing safety concerns for members and staff, ASTM International announced today that previously scheduled April standards development meetings in Boston (March 29-April 3) and Prague (April 27-30) have been canceled. The decision was based on several factors, including, but not limited to: Continued review of information and recommendations from the U.S.…, Media Inquiries:, Dan Bergels, tel +1.610.832.9602; dbergels@astm.org Release #10993
-
A new ASTM International standard will help manufacturers of particulates, such as sand, gravel, and grit, to better measure their products. According to ASTM International member Paul O’Brien, engineering manager at JM Canty, the new guide explains a way to correlate different types of instruments that measure solid-particle distributions. Using the new standard will help expand the capability…, Media Inquiries:, Dan Bergels, tel +1.610.832.9602; dbergels@astm.org, Committee Contact:, Molly Lynyak, tel +1.610.832.9743; mlynyak@astm.org Release #10674
-
ASTM International’s committee on particle and spray characterization ( E29 ) is working on a new standard that aims to reduce uncertainty from an existing test method (bubble point test) for woven wire filter cloth. The material, also known as Dutch weave, is used for general industrial filtration including separation of solids from fluids. The bubble point test determines the pressure at the…, Media Inquiries:, Dan Bergels, tel +1.610.832.9602; dbergels@astm.org, Committee Contact:, Molly Lynyak, tel +610.832.9743; mlynyak@astm.org Release #10657