Search
Advanced search
Filter by category
Filter by committee
Search results
-
ASTM International’s particle and spray characterization committee ( E29 ) is developing a proposed standard that will be used to measure physical and chemical properties of nanoparticles in a variety of industrial realms. The standard ( E3427 ) describes how to use laser-amplified detection/power spectrum analysis to measure the number of physical and chemical properties of nanoparticles,…, Media Inquiries:, Gavin O’Reilly, tel +1.610.832.9618; goreilly@astm.org, Committee Contact:, Jennifer Tursi, tel +1.610.832.9653; jtursi@astm.org Release #11790 ###
-
ASTM International’s committee on textiles ( D13 ) is developing a proposed standard for writing terminology in textile standards. “This practice is intended to address the importance of a ‘critical building block’ that is used to develop and construct a standard that has value and utility for many years,” says ASTM International member Vince Diaz. “If the terminology is vague or ambiguous, the…, Media Inquiries:, Gavin O’Reilly, tel +1.610.832.9618; goreilly@astm.org, Committee Contact:, Nora Nimmerichter, tel +1.610.832.9815; nnimmerichter@astm.org Release #11656 ###
-
ASTM International announced today the Journal of Testing and Evaluation, the organization’s flagship journal, received an increased 2021 impact factor rating of 1.333, up 5.5% from the previous year. The impact factor is calculated each year by Clarivate Analytics and given to journals that appear in their database, Science Citation Index. Launched in 1973, the journal is a multi-disciplinary…, Media Inquiries:, Dan Bergels, tel +1.610.832.9602; dbergels@astm.org Release #11472 ###
-
Particle size distribution is an important factor in the manufacture of many products, from cement to perfume. A proposed ASTM International standard ( WK45240 ) will set out a general approach to the particle size distribution measurement of powders, suspensions, or slurries using an appropriate wet or dry methodology by the laser diffraction technique. ASTM’s committee on particle and spray…
-
A proposed ASTM International standard test method will cover the determination of maturity, fineness, ribbon width, and specific surface area (micronaire) of cotton fibers. ASTM International’s textiles committee ( D13 ) is developing the proposed standard. This test method ( WK75782 ) focuses on cotton fibers from a loose, chemically untreated sample taken before harvest, during ginning,…, Media Inquiries:, Jaime Martorana, tel +1.610.832.9796; jmartorana@astm.org, Committee Contact:, Nora Nimmerichter, tel +1.610.832.9815; nnimmerichter@astm.org Release #11267 ###
-
A new ASTM International standard will be used to test for specific metals in crude oils. ASTM’s petroleum products, liquid fuels, and lubricants committee ( D02 ) developed the new standard. The new standard (soon to be published as D8322) describes a test method using microwave plasma atomic emission spectrometry (MP-AES) to determine the presence of nickel, vanadium, iron, and other elements…, Media Inquiries:, Dan Bergels, tel +1.610.832.9602; dbergels@astm.org, Committee Contact:, Alyson Fick, tel +1.610.832.9710; afick@astm.org Release #11053 ###
-
ASTM International’s smart textiles subcommittee (known as D13.50) has approved its first standard, a compilation of industry terms. “The textile industry is currently experiencing a renaissance with the development of novel and emerging materials that provide opportunities for new consumer applications and markets,” says ASTM International member Carole Winterhalter. “This new smart textile…, Media Inquiries:, Dan Bergels, tel +1.610.832.9602; dbergels@astm.org, Committee Contact:, Jennifer Rodgers, tel +1.610.832.9694; rwilhelm@astm.org Release #10850
-
A new ASTM International standard will help manufacturers of particulates, such as sand, gravel, and grit, to better measure their products. According to ASTM International member Paul O’Brien, engineering manager at JM Canty, the new guide explains a way to correlate different types of instruments that measure solid-particle distributions. Using the new standard will help expand the capability…, Media Inquiries:, Dan Bergels, tel +1.610.832.9602; dbergels@astm.org, Committee Contact:, Molly Lynyak, tel +1.610.832.9743; mlynyak@astm.org Release #10674
-
ASTM International’s committee on particle and spray characterization ( E29 ) is working on a new standard that aims to reduce uncertainty from an existing test method (bubble point test) for woven wire filter cloth. The material, also known as Dutch weave, is used for general industrial filtration including separation of solids from fluids. The bubble point test determines the pressure at the…, Media Inquiries:, Dan Bergels, tel +1.610.832.9602; dbergels@astm.org, Committee Contact:, Molly Lynyak, tel +610.832.9743; mlynyak@astm.org Release #10657
-
An update to a standard on woven wire filter cloth (sometimes called Dutch weave) aims to better meet the needs of the filtration industry. Members of the ASTM International committee on particle and spray characterization ( E29 ) changed the standard from a guide to a specification that notably includes material tolerances. Generally, filter cloth is made from metal or metal alloy wires which…, Media Inquiries:, Dan Bergels, tel +1.610.832.9602; dbergels@astm.org, Committee Contact:, Molly Lynyak, tel +1.610.832.9743; mlynyak@astm.org Release #10579