Search
Advanced search
Filter by category
Filter by committee
Search results
-
ASTM International’s concrete pipe committee ( C13 ) has approved a new standard that will help in manufacturing circular concrete pipe that is installed using pipe jacking techniques. The type of pipe covered by the new standard is typically used to convey sewage, industrial wastes, stormwater, or utilities. Engineers, precast concrete pipe manufacturers, and jacking contractors will be the…
-
New ASTM International Standard Is First for Testing Corrosion Effects in Manufacturing of AdditivesA new standard developed by ASTM International’s concrete pipe committee ( C13 ) is the first standard test for determining the effectiveness of antimicrobial additives on the corrosion of concrete. “This standard presents test methods to help determine effects of biogenic acidification on concrete products and/or the efficacy of antimicrobial products to resist microbially-induced corrosion in…, Media Inquiries:, Jaime Martorana, tel +1.610.832.9796; jmartorana@astm.org, Committee Contact:, Jimmy Farrell, tel +1.610.832.9661; jfarrell@astm.org Release #11124 ###
-
A new ASTM International standard will serve as a guide for standards related to determining the effects of biogenic sulfuric acid on concrete products. ASTM’s concrete pipe committee approved the standard, which is soon to be published as C1894. According to ASTM International member Mel Marshall, the new standard fills the need for a guide that discusses microbially induced corrosion (MIC) of…, Media Inquiries:, Dan Bergels, tel +1.610.832.9602; dbergels@astm.org, Committee Contact:, Jimmy Farrell, tel +1.610.832.9661; jfarrell@astm.org Release #10898
-
ASTM International’s committee on masonry units ( C15 ) has approved a new standard that provides guidelines for masonry units manufactured with materials not currently addressed by existing ASTM standards. Traditional ASTM masonry units are manufactured out of inorganic materials that can include fired clay, shale, concrete, sand-lime, or calcium silicates. Masonry units are used for a wide…, Media Inquiries:, Dan Bergels, tel +1.610.832.9602; dbergels@astm.org, Committee Contact:, Krista Robbins, tel +1.610.832.9689; krobbins@astm.org Release #10600
-
ASTM International to Host November Workshop on Substance Restriction Challenges and StandardizationASTM International’s committee on declarable substances in materials ( F40 ) is sponsoring a workshop on Substance Restriction Challenges and Standardization, Nov. 8, 2017, at the DIN Headquarters in Berlin, Germany. This workshop will discuss international and broad perspectives of RoHS and REACH. It will also review practical testing for California’s Prop 65 and give an industry perspective…, Workshop Contact:, Tessa Sulkes, tel +1.610.832.9677; symposia@astm.org
-
A new ASTM International standard supports the growing use of concrete paving slabs for commercial and residential projects. The new specification ( C1782/C1782M , Specification for Utility Segmental Concrete Paving Slabs) determines the minimum flexural strength, dimensional tolerances, and freeze-thaw durability requirements for paving slabs with dimensions ranging from 12 by 12 in. to 48 by 48…, ASTM Committee C15 on Manufacturing Masonry Units Next Meeting:, Dec. 6-8, 2016, December Committee Week, Orlando, Fla., Media Inquiries:, Dan Bergels, tel +1.610.832.9602; dbergels@astm.org, Technical Contact:, David Smith, Interlocking Concrete Pavement Institute, Chantilly, Va., tel +1.703.657.6900; dsmith@icpi.org, ASTM Staff Contact:, Krista Robbins, tel +1.610.832.9689; krobbins@astm.org Release #10145
-
ASTM International has fully redesigned its International Laboratory Directory, the only directory in the world dedicated to helping manufacturers find the right labs to test their products. Independent laboratories throughout the world rely on thousands of standards and test methods, including many developed by ASTM International. By working with these labs, manufacturers can help ensure that…, Contact:, Anna Spektor, tel +1.610.832.9756; aspektor@astm.org, Media Inquiries:, Dan Bergels, tel +1.610.832.9602; dbergels@astm.org Release #10110
-
A new ASTM International standard will support the sustainability and resiliency of concrete pipes that are reinforced by synthetic fibers. The new standard (soon to be approved as C1818, Specification for Rigid Synthetic Fiber Reinforced Concrete Culvert, Storm Drain and Sewer Pipe) describes a strong and durable option that can be used for underground piping. Pipes in this new standard are used…, ASTM Committee C13 on Concrete Pipe Next Meeting:, Nov. 15-18, 2015, November Committee Week, Tampa, Fla., Media Inquiries:, Nathan Osburn, tel +1.610.832.9603; nosburn@astm.org, Technical Contact:, Ali Abolmaali, University of Texas, Arlington, Texas, tel +1.817.272.3877; abolmaail@uta.edu, ASTM Staff Contact:, Diane Lake, tel +1.610.832.9661; dlake@astm.org Release #9940
-
Precast reinforced concrete box sections are proving to be a versatile means for the development of infrastructure. The use of segmental box sections is now covered in an ASTM standard, ASTM C1786 , Specification for Segmental Precast Reinforced Concrete Box Sections for Culverts, Storm Drains and Sewers Designed According to AASHTO LRFD. The American Association of State Highway and…, Technical Contact:, Josiah W. Beakley, American Concrete Pipe Association, Irving, Texas, tel +1.972.894.2906; jbeakley@concrete-pipe.org, ASTM Staff Contact:, Diane Lake, tel +1.610.832.9661; dlake@astm.org, ASTM PR Contact:, Barbara Schindler, tel +1.610.832.9603; bschindl@astm.org Release #9745
-
Events Include USTDA-Sponsored Workshop, Rare Earth Materials Workshop and RoHS Roundtable, ASTM International Committee F40 on Declarable Substances in Materials conducted its biannual standards development meetings on March 10-11, 2014, at Thermo Fisher Scientific’s facilities in Shanghai, China. The meeting included both standards development work and special presentations. ASTM staff and F40 members participated in other events related to declarable substances in China, including…, F40 Meeting, Committee F40 is currently developing three proposed new standards, which were discussed in the Shanghai meeting: • ASTM WK26792, Guide for Identification of Declarable Substances in Polymeric Materials; • ASTM WK21957, Test Method for Identification and Quantification of Lead in Paint and Other Coatings Using Energy Dispersive X-Ray Spectrometry (EDXRF); and • ASTM WK44003, Test Method for…, New Chemical Substance Workshop, Members of F40 participated in the U.S.-China Provisions on the Environmental Administration of New Chemical Substances workshop held in Shanghai on March 12. The workshop was organized by ASTM International in cooperation with the American National Standards Institute on behalf of the U.S. Trade and Development Agency. More than 30 participants from different regions of China, as well as from…, Rare Earth Materials Workshop, On March 13, F40 held a Rare Earth Materials workshop. Gao Lan, secretary general, Standardization Administration of China’s TC229 on Rare Earth Metals, provided an overview of TC229’s work, while Taco van der Marten, chairman of ASTM Subcommittee F40.04 on Rare Earth Materials, described the history and current activities of the subcommittee. The workshop also featured a presentation by Kevin…, RoHS Roundtable, Alyson Fick, ASTM staff manager for F40, spoke at a March 17 event held by the American Chamber of Commerce, China division, in Beijing. The roundtable on restriction of hazardous substances (RoHS) standards provided the opportunity for China-based U.S.-funded companies to understand ASTM standards that consider RoHS issues. Also speaking at that roundtable were Weibing Xing, chief engineer,…, Sinopec Visit, In addition to the F40 meetings and events, Fick, along with ASTM China office representatives Liu Fei and Nancy Hu, visited the polymers and plastic building product division of Sinopec Petroleum in Beijing. This division uses many standards under the jurisdiction of ASTM International Committee D20 on Plastics . The ASTM staff provided an overview of ASTM and D20 to 20 attending engineers. A…, ASTM Committee F40 Next Meeting:, Nov. 12-14, 2014, New Orleans, La., ASTM Staff Contact:, Alyson Fick, Phone: 610-832-9710; afick@astm.org , ASTM PR Contact:, Barbara Schindler, Phone: 610-832-9603; bschindl@astm.org Release #9634