Search
Advanced search
Filter by category
Filter by committee
Search results
-
ASTM International’s steel, stainless steel, and related alloys committee ( A01 ) is developing a proposed standard that will help guide manufacturers of wire rods and galvanized steel wire and cable that are crucial to the construction of bridges. “As the key and control parts of a road system, bridges play an important role in modern traffic,” says ASTM International member Yun Bai, of…, Media Inquiries:, Gavin O’Reilly, tel +1.610.832.9618; goreilly@astm.org, Committee Contact:, Scott Orthey, tel +1.610.832.9730; sorthey@astm.org Release #11648 ###
-
ASTM International’s electrical insulating liquids and gases committee ( D27 ) has approved a new standard that will cover the use of recycled oil in electrical equipment. According to ASTM member Jimmy Rasco, the new standard ( D8180 ) will serve as a basis for the transformer industry to purchase re-refined transformer liquid. “A standard for this purpose does not currently exist and there is…, Media Inquiries:, Dan Bergels, tel +1.610.832.9602; dbergels@astm.org, Committee Contact:, Kelly Paul, tel +1.610.832.9745; kpaul@astm.org Release #11620, ###
-
ASTM International’s steel, stainless steel and related alloys committee ( A01 ) is developing a proposed standard on new epoxy coating technology that will be used to protect reinforcing steel from corrosive environments. According to ASTM member David Darwin, epoxy coatings are used to protect reinforcing steel from corrosive environments, such as structures subject to chlorides. Such…, Media Inquiries:, Dan Bergels, tel +1.610.832.9602; dbergels@astm.org, Committee Contact:, Scott Orthey, tel +1.610.832.9730; sorthey@astm.org Release #11616 ###
-
A new ASTM International standard covering table saw safety has been developed by ASTM’s occupational health and safety committee ( E34 ). The standard, soon to be published as E3280, addresses a gap in U.S. standards, which address design safety of table saws but don’t directly address the end users. The new standard guide includes topics beyond design-related safety, including installation,…, Media Inquiries:, Dan Bergels, tel +1.610.832.9602; dbergels@astm.org, Committee Contact:, Travis Murdock, tel +1.610.832.9826; tmurdock@astm.org Release #11576 ###
-
ASTM’s committee on electrical insulating liquids and gases ( D27 ) is developing a proposed standard for insulating fluids in distribution and power transformers. According to ASTM International member Edward Casserly, because insulating fluids can oxidize over time, the liquids are formulated with antioxidants that act as inhibitors to minimize oxidation that is detrimental to cooling…, Media Inquiries:, Dan Bergels, tel +1.610.832.9602; dbergels@astm.org, Committee Contact:, Kelly Paul, tel +1.610.832.9745; kpaul@astm.org Release #11438 ###
-
A new ASTM International standard covers welded carbon steel tubes that will help to enhance the efficiency of heat transfer in industrial plants and heating vacuum and air-conditioning (HVAC) systems. ASTM International’s committee on steel, stainless steel, and related alloys (A01) developed the new standard, which will soon be published as A1120/A1120M. ASTM International member David Kukulka…
-
ASTM International’s committee on steel, stainless steel and related alloys ( A01 ) is developing a proposed standard that will present a fast-screening framework for verifying the alloys in stainless-steel products. According to ASTM International member David O’Donnell, portable positive material identification (PMI) devices have become a reliable alternative to more costly methods of…
-
A new ASTM International standard will help protect foundry workers who routinely handle molten metal. ASTM’s occupational health and safety committee ( E34 ) developed the new standard ( E3279 ). The standard includes an objective framework for recognizing heat stress and heat strain in foundries and it provides for the use of best practices to manage heat exposures to minimize heat strain. …, Media Inquiries:, Jaime Martorana, tel +1.610.832.9796; jmartorana@astm.org , Committee Contact:, Travis Murdock, tel +1.610.832.9826; tmurdock@astm.org Release #11238 ###
-
ASTM International’s committee on steel, stainless steel, and related alloys ( A01 ) is developing a proposed standard that will provide requirements for precision sharp-cornered laser and laser-hybrid carbon steel square and rectangular tube and guidance on the specification of open sections used in architectural and industrial applications. ASTM International member Catherine Houska notes that…, Media Inquiries:, Jaime Martorana, tel +1.610.832.9796; jmartorana@astm.org , Committee Contact:, Scott Orthey, tel +1.610.832.9730; sorthey@astm.org Release #11181, , ###
-
A proposed ASTM International standard will help in the construction of water service lines connecting buildings to water distribution mains. ASTM’s committee on steel, stainless steel, and related alloys ( A01 ) is developing the proposed standard. The proposed standard ( WK70162 ) describes the use of welded partially corrugated stainless steel tube for potable water, though ASTM…, Media Inquiries:, Dan Bergels, tel +1.610.832.9602; dbergels@astm.org, Committee Contact:, Scott Orthey, tel +1.610.8329730; sorthey@astm.org Release #11105 ###