ASTM International’s water committee (D19) has approved a new standard that will help address global concerns about the concentration of polyfluoroalkyl substances (PFAS) in water supplies.

According to ASTM International member William Lipps, the new standard required testing of nine complex wastewater matrices, each spiked in triplicate at three concentrations spanning the analytical range of the method.

“Very good precision and recovery obtained on all matrices, along with precision and recovery obtained on spiked reagent water, were used to calculate the quality control limits included in the method,” says Lipps. “These limits establish criteria that individual laboratories must meet before running samples and criteria that will be used to demonstrate performance of labs when running samples.”  

This effort directly relates to the United Nations Sustainable Development Goals #6 on clean water and sanitation, as well as #13 on climate action and #14 on life below water.

Lipps notes the new standard will help to minimize water use in laboratories and help keep water clean by providing new methods for the analysis of trace contaminants in water.

“The smaller volumes required for this test are 25-100 times less volume than a typical EPA method, reducing shipping weight and cooler size, resulting in a smaller carbon footprint,” says Lipps. “The minimal extraction, while using plastics, minimizes their use compared to other PFAS methods; in this method, the sample is extracted in the same vial in which it was sampled.”

Lipps says that all interested parties are invited to join in the interlaboratory study now being planned for the new standard, which will soon be published as D8421.



Media Inquiries: Dan Bergels, tel +1.610.832.9602; dbergels@astm.org


Committee Contact: Brian Milewski, tel +1.610.832.9619; bmilewski@astm.org
    
Release #11341
                                                                                 ###