Two keystone documents for the Exterior Insulation and Finish Systems industry are now ASTM International standards. E 2568, Specification for PB Exterior Insulation and Finish Systems, and E 2570, Test Methods for Evaluating Water-Resistive Barrier (WRB) Coatings Used Under Exterior Insulation and Finish Systems (EIFS) or EIFS with Drainage, were approved as ASTM standards by ASTM International Committee E06 on Performance of Buildings. Both standards are under the jurisdiction of Subcommittee E06.58 on Exterior Insulation and Finish Systems (EIFS).

“These are significant documents for the proper specification of EIFS and are used by architects, designers and specifiers,” says Stephan E. Klamke, EIFS Industry Member Association and E06.58 member.

E 2568 covers PB EIFS, which is defined as an exterior, non-bearing wall covering providing a weather-resistant exterior wall envelope on walls required to be combustible or noncombustible, fire-resistance-rated or non-fire-resistance-rated. In addition, the system is described as being applied over insulation board, an adhesive or mechanical attachment of the insulation board to a substrate, or both, glass fiber reinforcing mesh, a base coat on the face of the insulation board, and a textured protective finish coat.

The test methods in E 2570 apply to trowel, roller or spray-applied water-resistive barrier coatings that are applied over exterior sheathing prior to application of EIFS or EIFS with drainage wall claddings.

ASTM International standards can be purchased from Customer Service (phone: 610/832-9585; https://www.astm.org/contact/) or at www.astm.org.

For further technical information, contact Stephan E. Klamke, EIFS Industry Members Association, Morrow, Ga. (phone: 770/770-9687; sklamke@eima.com). Committee E06 meets April 6-9 at the April committee week in Anaheim, Calif. For membership or meeting information, contact Stephen Mawn, Technical Committee Operations, ASTM International (phone: 610/832-9726; smawn@astm.org).

Release #7876