Search
Advanced search
Filter by category
Filter by committee
Search results
-
ASTM International Committee F38 on Unmanned Aircraft Systems (UAS) was recently requested by the Federal Aviation Administration to assist with the development of industry consensus standards to support the integration of small unmanned aircraft systems (sUAS) into the U.S. national airspace system (NAS). Following a model that was successfully used for the integration of light sport aircraft…
-
Standards developed by ASTM International Committees F20 on Hazardous Substances and Oil Spill Response and E47 on Biological Effects and Environmental Fate play a role in both the initial response and follow-up to oil spills. The recent spill in the Gulf of Mexico highlights the importance of standards that cover all aspects of oil spill response and cleanup. F20 on Hazardous Substance and Oil…
-
The U.S. Federal Aviation Administration has selected ASTM International Committee F38 on Unmanned Aircraft Systems to develop industry standards for small unmanned aircraft systems. These standards will allow sUAS to file and fly missions in the national airspace alongside manned aircraft. According to Rocklin Gmeiner, director, federal/civil programs, Raytheon, and chairman of F38.01, one of…, Technical Contact:, Rocklin Gmeiner, Raytheon Co., Arlington, Va., Phone: 703-284-4308, regmeiner@raytheon.com, ASTM Staff Contact:, Daniel Schultz, Phone: 610-832-9716; dschultz@astm.org, ASTM PR Contact:, Barbara Schindler, Phone: 610-832-9603; bschindl@astm.org Release #8507/Feb2010
-
Standards will Support Special Federal Aviation Regulations ASTM International has been selected by the U.S. Federal Aviation Administration as one of the standards development organizations that will develop small unmanned aircraft system, or sUAS, standards intended to support new FAA regulations. This activity will take place in ASTM Committee F38 on Unmanned Aircraft Systems, where members…, Technical Contact:, James Jewell, UAV MarketSpace Inc., Bath, Pa., Phone: 610-910-4029 ; james@uavm.com, ASTM Staff Contact:, Daniel Schultz, Phone: 610-832-9716; dschultz@astm.org, ASTM PR Contact:, Barbara Schindler, Phone: 610-832-9603; bschindl@astm.org Release #844 5/Dec2009
-
ASTM International Subcommittee E34.50 on Health and Safety Standards for Metalworking Fluids has developed three new standards. Two of the recently approved ASTM standards cover aspects of water-miscible metalworking fluids, while the third concerns prevention of dermatitis in the wet metal removal fluid environment., Prevention of Dermatitis, Dermatitis is an inflammatory response of the skin to a chemical or physical agent. While redness, swelling and itching are typical signs of dermatitis, symptoms can be more severe as well. A new ASTM standard, ASTM E2693 , Practice for Prevention of Dermatitis in the Wet Metal Removal Fluid Environment, discusses dermatitis and its causes and presents a comprehensive approach to dermatitis…, Metalworking Fluids, Two new E34.50 standards address the detection of microbial contamination in metalworking fluids: ASTM E2657 , Test Method for Determination of Endotoxin Concentrations in Water-Miscible Metalworking Fluids, and ASTM E2694 , Test Method for Measurement of Adenosine Triphosphate in Water-Miscible Metalworking Fluids. Both ASTM E2657 and ASTM E2694 measure biological contamination in metalworking…, Participation Invited, The subcommittee is currently looking for participants for an interlaboratory study for ASTM E2657 and ASTM E2694 . “We plan to use a single set of MWF for both standards, so labs who are interested in either or both are welcome to participate,” says Passman. “A few labs will run both the ILS’s for both standards, while most will run one or the other.” Subcommittee E34.50 is part of ASTM…
-
Vessel-mounted cameras can be effectively and economically used by ship crews investigating and responding to an oil spill. ASTM International Committee F20 on Hazardous Substances and Oil Spill Response is currently developing a proposed new standard on use of cameras in this realm. WK24607 , Specification for the Design and Use of Vessel-Mounted Camera Systems for Oil Spill Response, is under…
-
ASTM International Committee F38 on Unmanned Aircraft Systems will meet at ASTM International Headquarters on Wednesday and Thursday, July 22 and 23. The meeting will open with a briefing on the small UAS (sUAS) landscape from FAA and F38, and discussion on standards needed to support regulatory efforts. This is based on the recommendations of the FAA’s sUAS Aviation Rulemaking Committee (ARC…
-
Oil skimmer nameplate capacities are used to evaluate system performance for spill response planning standards. While manufacturers had been free to state any value as to the theoretical capacity of an oil skimmer, a new ASTM International standard provides a test that can be used to establish a realistic capacity. The standard, F2709 , Test Method for Determining Nameplate Recovery Rate of…
-
Subcommittee F38.01 on Airworthiness, part of ASTM International Committee F38 on Unmanned Air Vehicle Systems, has approved a new standard for flight authority and is currently working on a proposed standard that covers UAS recovery systems. Subcommittee F38.01 welcomes participation in its ongoing standards development activities. ASTM F2690 - Flight Authority Gerry Marsters, president,…
-
All interested parties in the glass industry are invited to participate in the development of a proposed new standard guide for the safe handling of annealed glass. The new standard will be developed by a task group within ASTM Committee E34 on Occupational Health and Safety. A small group from industry and OSHA met in Rossford, Ohio, in March to discuss this new activity. The task group plans to…