Search
Advanced search
Filter by category
Filter by committee
Search results
-
All interested parties are invited to participate in the standards developing work of Subcommittee F23.50 on Certification and PPE Interoperability, part of ASTM International Committee F23 on Personal Protective Clothing and Equipment. The subcommittee, which was formed in 2009, is currently working on a proposed new standard, WK27616 , Practice for a Product Certification Process. According to…
-
A proposed new ASTM International standard for liquid threats on protective clothing will cover the specific needs of law enforcement officers. The new standard, ASTM WK25965 , Test Method for Liquid Threat Sprayed on a Mannequin, is being developed by Subcommittee F23.30 on Chemicals, part of ASTM International Committee F23 on Personal Protective Clothing and Equipment. Fire and hazardous…
-
Creep-fatigue testing simulates the loading and temperature conditions experienced by turbine components of aircraft engines, nuclear reactor components and fossil power plant components during service. With increasing need for cyclic operation during peak power demands, reliable creep-fatigue test data is necessary for the life assessment of aging power plants. A new ASTM standard, ASTM E2714 ,…
-
The ability to provide the correct amount of protection is one of the important elements in the development of protective clothing worn by individuals who apply pesticides as part of their jobs. While overprotection in hot climatic conditions can result in heat stress and low compliance, some of the existing design-based requirements can result in too little protection, as material performance…, CONTACT:, ASTM Committee F23 Next Meeting:, Jan. 26-28, 2010, January committee week, San Antonio, Texas, Technical Contact:, Anugrah Shaw, University of Maryland Eastern Shore, Princess Anne, Md., Phone: 410-651-6064; ashaw@umes.edu, ASTM Staff Contact:, Stephen Mawn, ASTM International, Phone: 610-832-9726; smawn@astm.org, ASTM PR Contact:, Barbara Schindler, ASTM International, Phone: 610-832-9603; bschindl@astm.org Release #84 54/Jan2010
-
A proposed new ASTM standard will assist in establishing tests for fretting fatigue, an issue at attachments and joints in a variety of mechanical, aeronautical and biomedical engineering systems and devices. WK24298 , Guide for Fretting Fatigue Testing, is being developed by Subcommittee E08.05 on Cyclic Deformation and Fatigue Crack Formation, part of ASTM International Committee E08 on Fatigue…, ASTM Committee E08 Next Meeting:, May 17-20, 2010, May Committee Week, St. Louis, Mo., Technical Contact:, Richard W. Neu, Georgia Institute of Technology, Atlanta, Ga., Phone: 404-894-3074; rick.neu@gatech.edu, ASTM Staff Contact:, Jeff Adkins, Phone: 610-832-9738; jadkins@astm.org, ASTM PR Contact:, Barbara Schindler, Phone: 610-832-9603; bschindl@astm.org Release #8430/Dec2009
-
Workers in oil refineries, chemical plants, the natural gas industry and other industries that involve flammable or explosive materials need access to rain gear that is also flame resistant. A new ASTM International standard, ASTM F2733 , Specification for Flame Resistant Rainwear for Protection Against Flame Hazards, provides minimum requirements for flame resistant rainwear to be used by…
-
ASTM International Subcommittee E34.50 on Health and Safety Standards for Metalworking Fluids has developed three new standards. Two of the recently approved ASTM standards cover aspects of water-miscible metalworking fluids, while the third concerns prevention of dermatitis in the wet metal removal fluid environment., Prevention of Dermatitis, Dermatitis is an inflammatory response of the skin to a chemical or physical agent. While redness, swelling and itching are typical signs of dermatitis, symptoms can be more severe as well. A new ASTM standard, ASTM E2693 , Practice for Prevention of Dermatitis in the Wet Metal Removal Fluid Environment, discusses dermatitis and its causes and presents a comprehensive approach to dermatitis…, Metalworking Fluids, Two new E34.50 standards address the detection of microbial contamination in metalworking fluids: ASTM E2657 , Test Method for Determination of Endotoxin Concentrations in Water-Miscible Metalworking Fluids, and ASTM E2694 , Test Method for Measurement of Adenosine Triphosphate in Water-Miscible Metalworking Fluids. Both ASTM E2657 and ASTM E2694 measure biological contamination in metalworking…, Participation Invited, The subcommittee is currently looking for participants for an interlaboratory study for ASTM E2657 and ASTM E2694 . “We plan to use a single set of MWF for both standards, so labs who are interested in either or both are welcome to participate,” says Passman. “A few labs will run both the ILS’s for both standards, while most will run one or the other.” Subcommittee E34.50 is part of ASTM…
-
In the field of personal protective clothing, a temperature rating indicates the lowest acceptable air temperature at which an average person would be comfortable when wearing a certain set of clothing. While manufacturers believe that providing temperature ratings is helpful to consumers when they are comparing garments, there have been different methods of testing for a temperature rating. The…
-
Data produced from the use of a proposed new ASTM International standard will be employed in the design of new, more efficient aircraft engines as well as for piping, steam and gas turbines used in power generation. The proposed new standard, WK21984 , Test Method for Creep-Fatigue Crack Growth Rate Testing, is being developed by Subcommittee E08.06 on Crack Growth Behavior, part of ASTM…
-
All interested parties in the glass industry are invited to participate in the development of a proposed new standard guide for the safe handling of annealed glass. The new standard will be developed by a task group within ASTM Committee E34 on Occupational Health and Safety. A small group from industry and OSHA met in Rossford, Ohio, in March to discuss this new activity. The task group plans to…