Search
Advanced search
Filter by category
Filter by committee
Search results
-
Outbreaks of the H1N1 influenza this year have increased the public’s awareness and use of leave-on hand antiseptics, popularly known as hand sanitizers. ASTM International Committee E35 on Pesticides and Alternative Control Agents is now developing a proposed new standard that will measure the antibacterial activity of hand sanitizers on people’s hands. ASTM WK23789 , Test Method for Evaluation…
-
Traffic paint plays an important role in maintaining the safety of roads. Subcommittee D01.44 on Traffic Coatings, part of ASTM International Committee D01 on Paint and Related Coatings, Materials and Applications, is currently working on two proposed new standards covering the sampling of waterborne traffic paint and glass bead gradation measurement., WATERBORNE TRAFFIC PAINT, Ensuring that traffic paint taken from the field is tested properly in laboratories is a concern of paint suppliers as well as private testing laboratories, Department of Transportation labs, DOT striping crews and striping contractors. A proposed new ASTM standard, ASTM WK22312 , Practice for Drum and Tote Sampling of Waterborne Traffic Paint, addresses laboratory sampling issues. According to…, GRADATION OF GLASS BEADS, Glass beads added to traffic paint during manufacturing are necessary to ensure paint retroreflectivity, especially at night. A proposed new standard, ASTM WK23758 , Test Method for Measuring Gradation of Glass Beads Using a Flowing Stream Digital Image Analyzer, will be useful in the production and quality control of glass beads. “Digital camera technology combined with high speed computers has…
-
More effective quality testing of the synthetic, hollow filaments that are often used in the manufacture of lower cost paintbrushes is the purpose of a new standard approved by ASTM International Committee D01 on Paint and Related Coatings, Materials and Applications. The new standard, ASTM D7233 , Test Method for Testing Fracture of Level Paintbrush Filaments, was developed by Subcommittee D01.…
-
The wettability of a particular solid coating, substrate or pigment on a surface is a key to its effectiveness, as wetting is important to adhesion as well as to the prevention of surface defects such as craters, dewetting and crawling. A new ASTM International standard uses contact angle measurements to determine the wettability of coatings. The new standard, D7490 , Test Method for Measurement…
-
Biofilm, which is defined as microorganisms living in a self-organized cooperative community, is still under the radar for many industry, medical, professional and regulatory agencies. A newly approved ASTM International standard is the latest in a series of biofilm standards being developed by Committee E35 on Pesticides and Alternative Control Agents. The new standard, E2647 , Test Method for…
-
By necessity, paint used for roadway applications needs to dry quickly. Some multi-component traffic paints cure in less than 10 minutes, some much faster. Because of this speed of curing, these traffic paints and other types of fast-cure (less than 10 minutes) multi-component paints cannot be tested for volatile content using procedures outlined in the ASTM International standard typically used…
-
ASTM International Committee E35 on Pesticides and Alternative Control Agents has now published the last in a series of three ASTM International standards that address the activity of hand hygiene agents against microbes that can be transmitted via contaminated hands. Subcommittee E35.15 on Antimicrobial Agents developed the new standard, ASTM E2613 , Test Method for Determining Fungus-…
-
Two new standards demonstrate the broad range of practices and test methods currently being developed by ASTM International Committee D01 on Paint and Related Coatings, Materials and Applications. The new ASTM standards will be used in the realms of color reproduction and contact angle measurement. Achieving Consistent Color Reproduction Developed by Subcommittee D01.56 on Printing Inks, ASTM…
-
ASTM Committee D01 on Paint and Related Coatings, Materials and Applications will present a technical seminar, “New Solvents and Formulating Techniques for Low VOC and HAP Paints,” on Sunday, June 15, 2008, from 4 to 6 p.m., at the Hyatt Regency Hotel in Vancouver, British Columbia, Canada. The seminar will be held in conjunction with the D01 committee meeting to be held June 15-18 in Vancouver…
-
ASTM International Committee E35 on Pesticides and Alternative Control Agents has begun work on the latest in a series of standards on biofilm. The proposed new standard, WK17813 , Test Method for Quantification of a, Pseudomonas aeruginosa, Biofilm Grown with Low Shear and Continuous Flow Using a Drip Flow Biofilm Reactor, is being developed by Subcommittee E35.15 on Antimicrobial Agents. According to Darla M. Goeres, senior research engineer, Center for Biofilm Engineering, and E35 member, biofilm is defined as microorganisms living in a self-organized cooperative community. These communities, which are embedded in slime and can be…, Pseudomonas aeruginosa, Biofilm Grown with High Shear and Continuous Flow Using CDC Biofilm Reactor; and E2196 , Test Method for Quantification of a, Pseudomonas aeruginosa, Biofilm Grown with Shear and Continuous Flow Using a Rotating Disk Reactor) is that biofilm is grown under low fluid shear close to the air/liquid interface and that the drip flow reactor is a plug flow reactor system, resulting in biofilm that is visible to the naked eye and smooth and slimy in appearance. Biofilm generated in a drip flow reactor could represent those found in a wide spectrum of…