Search
Advanced search
Filter by category
Filter by committee
Search results
-
Although it is a relatively young ASTM subcommittee, F24.65, part of ASTM International Committee F24 on Amusement Rides and Devices , has already had a positive influence on the parasailing industry. The subcommittee is currently working on a comprehensive proposed new standard, ASTM WK46657, Practices for Parasailing, that will provide best practices for owners and operators of parasailing…, Formation of F24.65 and F2993, Larry Meddock, executive director, Water Sports Industry Association, and an F24.65 member, says that the subcommittee was formed after the WSIA was approached by the U.S. Coast Guard to support an effort to create parasailing standards through the ASTM consensus process. The concept was introduced at the first Parasail Operators Symposium in January 2011, and Subcommittee F24.65 organized soon…, WK46657, Practices for Parasailing, F24.65’s proposed new standard, ASTM WK46657 , covers weather, equipment, operations, crew and patron responsibility as described below: • Weather: Weather monitoring equipment and weather conditions in which parasailing activities may be conducted. • Equipment: Equipment required to be aboard a parasail vessel, including maintenance and record keeping. • Operations: Pre-flight and flight…, F24.65 and the White-Miskell Act, F24.65’s work to increase the safety of parasailing has earned the commendation of Maria Lorts Sachs, a Florida state senator who sponsored the bill now known as the White-Miskell Act, which was signed into law by Florida Governor Rick Scott in June. The act requires that parasail operators: • Carry certain levels of liability insurance; • Have weather monitoring equipment on board during flights…, ASTM Committee F24.65 Next Meeting:, Nov. 6-8, 2014, St. Petersburg, Fla. Technical Contact: Larry Meddock, Water Sports Industry Association, Orlando, Fla., Phone: 407-620-7992; info@wsia.net , ASTM Staff Contact:, Katerina Koperna, Phone: 610-832-9728; kkoperna@astm.org , ASTM PR Contact:, Barbara Schindler, Phone: 610-832-9603; bschindl@astm.org Release #9615
-
ASTM International has recently updated the adjunct for its standard D7611 , Practice for Coding Plastic Manufactured Articles for Resin Identification. The adjunct contains graphic representations of the Resin Identification Code (RIC), as a molded, imprinted or raised symbol or wording used by manufacturers to imprint on plastic products or materials. The RIC symbols, each a combination of…, ASTM Committee D20 Next Meeting:, Nov. 9-12, 2014, November Committee Week, New Orleans, La., ASTM Staff Contact:, Alyson Fick, Phone: 610-832-9710; afick@astm.org Release #9610
-
Color and appearance are two of the leading qualities that a homeowner looks for when considering vinyl siding. A new ASTM standard will enable manufacturers of color plastic vinyl siding to enhance the color and appearance retention of their products. ASTM D7856, Specification for Color and Appearance Retention of Solid and Variegated Color Plastic Siding Products Using CIELab Color Space, will…, ASTM Committee D20 Next Meeting:, Nov. 9-12, 2014, November Committee Week, New Orleans, La., Technical Contact:, David Johnston, Vinyl Siding Institute, Washington, D.C., Phone: 202-587-5102; djohnston@vinylsiding.org, Subcommittee D20.24 Contact:, Alan Kupfer, Axiall Corp., Plaquemine, La., Phone: 225-685-1257; alan.kupfer@axiall.com, ASTM Staff Contact:, Alyson Fick, Phone: 610-832-9710; afick@astm.org , ASTM PR Contact:, Barbara Schindler, Phone: 610-832-9603; bschindl@astm.org Release #9584
-
For more than 100 years, cork tile has been commonly used as a floor and wall covering for residential and commercial use. A new ASTM International standard, ASTM F3008 , Specification for Cork Floor Tile, specifies requirements for cork floor coverings made from agglomerated composition cork supplied in tile form, which is designed to be used with a factory finish or an in situ finish, or both.…, ASTM Committee F06 Next Meeting:, May 7-8, 2014, Clearwater, Fla., Technical Contact:, Christopher Capobianco, Spartan Surfaces, Patchogue, N.Y., Phone: 631-275-6494; christopher@spartansurfaces.com, ASTM Staff Contact:, Stephen Mawn, Phone: 610-832-9726; smawn@astm.org , ASTM PR Contact:, Barbara Schindler, Phone: 610-832-9603; bschindl@astm.org Release #9523
-
On Aug. 23, 2013, Bolivian officials announced the acceptance of amusement ride safety standards developed by ASTM International Committee F24 on Amusement Rides and Devices . The announcement was made at a seminar on amusement ride safety in La Paz, Bolivia. The focus of the seminar was on the tremendous growth of the amusement industry sector, as well as the importance of having comprehensive…, Safety Seminar, The event was organized by Gabriela Nino de Guzman, chair of the La Paz City Council; Paulina Reyes, vice president of Latin American Operations at the International Association of Amusement Parks and Attractions; and Alvaro del Castillo, executive director of the Bolivian Institute of Standardization and Quality (IBNORCA). Del Castillo, Reyes and Nino de Guzman spoke at the opening of the…, ASTM Standards in Bolivia, The incorporation of ASTM standards by the IBNORCA, the national standards body of Bolivia, was made possible through a memorandum of understanding signed by the two organizations in 2002. ASTM worked closely with IBNORCA to facilitate review of the official Spanish translations of the ASTM F24 standards. To date, the MOU has enabled IBNORCA to utilize more than 250 ASTM standards for…, Jim Seay, Franceen Gonzales, Gabriela Nino de Guzman, Alvaro del Castillo, and, Paulina, Reyes, discuss, safety during a seminar on amusment rides , in La Paz, Bolivia., About ASTM International, ASTM International is one of the largest international standards development and delivery systems in the world. ASTM International meets the World Trade Organization (WTO) principles for the development of international standards: coherence, consensus, development dimension, effectiveness, impartiality, openness, relevance and transparency. ASTM standards are accepted and used in research and…, About IAAPA, Founded in 1918, IAAPA is the largest international trade association for permanently situated amusement facilities and attractions, and is dedicated to the preservation and prosperity of the attractions industry. The association’s global headquarters is in Alexandria, Va., United States, and it maintains regional offices in Brussels, Mexico City and Hong Kong. For more information, visit www.…, ASTM Committee F24 Next Meeting:, Oct. 24-26, 2013, Scottsdale, Ariz., Technical Contact:, James L. Seay, Premier Rides, Baltimore, Md., Phone: 410-923-0414; jseay@premier-rides.com, ASTM Staff Contac, t: Leonard Morrissey, Phone: 610-832-9719; lmorrissey@astm.org , ASTM PR Contact:, Barbara Schindler, Phone: 610-832-9603; bschindl@astm.org Release #9486
-
The popularity of trampoline courts has grown rapidly. While there were initially just a handful of such facilities on the West Coast of the United States in 2007, there are now approximately 160 trampoline parks throughout the world. Due to deep interest from a wide variety of stakeholders, a new standard for trampoline courts has been approved by ASTM International. The new standard, ASTM F2970…, Regulators/Policymakers, − The standard provides guidance in setting policy and regulations that will aid in the permitting process for trampoline courts. ASTM F2970 provides clear guidance to regulatory officials when permitting and inspecting trampoline courts from a compliance perspective. •, Designers/Engineers/Manufacturers, − ASTM F2970 provides aid in the design phase and establishes clear guidelines for manufacturers’ responsibilities. •, Owners/Operators, − ASTM F2970 provides guidance on planning, operation, signage and patron education. •, General Public, − The standard establishes clear guidelines for trampoline court foam pits, frame padding, accessibility, patron education and conduct guidelines. “The new standard was developed by a dedicated group of stakeholders including manufacturers, owner/operators, risk managers, regulators and consumer advocates,” says Slaggert. “Every aspect of ASTM F2970 was developed with the end user in mind.” “The…, ASTM Committee F24 Next Meeting:, Oct. 24-25, 2013, Scottsdale, Ariz., Technical Contact:, Philip Slaggert, Slaggert Risk Management, Hobe Sound, Fla., Phone: 561-758-3266; pslaggert@msn.com , ASTM Staff Contact:, Leonard Morrissey, Phone: 610-832-9719; lmorrissey@astm.org , ASTM PR Contact:, Barbara Schindler, Phone: 610-832-9603; bschindl@astm.org Release #9436
-
The headspace in domestic wastewater collection and treatment systems is a severe environment that can impact even high performance protective coatings. A proposed new ASTM International standard covers an apparatus and set of procedures that are used to create and maintain a simulated sewer headspace environment to be used to test potential coatings. ASTM WK33537 , Practice for Operating the…, ASTM Committee G01 Next Meeting:, Nov. 12-14, 2013, November Committee Week, Jacksonville, Fla., Technical Contact:, Vaughn O’Dea, Tnemec Co. Inc., Kansas City, Mo., Phone: 816-519-2267; odea@tnemec.com , ASTM Staff Contact:, Jennifer Rodgers, Phone: 610-832-9694; jrodgers@astm.org , ASTM PR Contact:, Barbara Schindler, Phone: 610-832-9603; bschindl@astm.org Release #9438
-
ASTM International Subcommittee D20.95 on Recycled Plastics , part of Committee D20 on Plastics , has approved major enhancements to D7611, Standard Practice for Coding Plastic Manufactured Articles for Resin Identification. ASTM D7611 , first issued in 2010, covers the long-standing Resin Identification Code (RIC) system for identifying the various types of plastic resin used in manufactured…, Ensuring Proper Usage of the Coding System, Among the major revisions to ASTM D7611 is a change to the graphic marking symbol used to identify resin type. The RIC system has used a “chasing arrows” symbol surrounding a numeral from 1 to 7 that defines the resin used in the product’s packaging. Under D7611, this marking symbol is now specified as a solid equilateral triangle around the number. The RIC system was originally developed and…, Addressing the Need for New Resins, ASTM D7611 provides codes for the six most commonly found resin types, with a seventh category created for all other types. These categories include: 1) polyethylene terephthalate (PETE); 2) high density polyethylene (HDPE); polyvinyl chloride (V); 4) low density polyethylene (LDPE); 5) polypropylene (PP); 6) polystyrene (PS); and 7) other, including materials made with more than one resin from…, Technical Contact:, Thomas Pecorini, Eastman Chemical Co., Kingsport, Tenn., Phone: 423-229-5917; tjpec@eastman.com , ASTM Staff Contact:, Alyson Fick, Phone: 610-832-9710; afick@astm.org , ASTM PR Contact:, Barbara Schindler, Phone: 610-832-9603; bschindl@astm.org Release #9394
-
Section 108 of the Consumer Product Safety Improvement Act of 2008 prohibits certain products from containing six specified phthalates. A new ASTM International standard under the jurisdiction of Committee D20 on Plastics provides a method for the identification and qualification of these phthalates. The new standard, ASTM D7823 , Test Method for Determination of Low Level, Regulated Phthalates…, ASTM Committee D20 Next Meeting:, Nov. 10-13, 2013, November Committee Week, Jacksonville, Fla., Technical Contact:, David P. Owen, BASF, Pasadena, Texas, Phone: 281-884-4451; david.owen@basf.com , ASTM Staff Contact:, Alyson Fick, Phone: 610-832-9710; afick@astm.org , ASTM PR Contact:, Barbara Schindler, Phone: 610-832-9603; bschindl@astm.org Release #9391
-
The growth of parasailing as an amusement activity has led to calls for standardization. A new ASTM subcommittee, F24.65 on Parasailing , will be developing standards for operations, crew proficiency and equipment. F24.65 is under the jurisdiction of ASTM International Committee F24 on Amusement Rides and Devices . Because weather, particularly gusty wind, has been a variable in parasailing…, ASTM Committee F24 Next Meeting:, Oct. 24-26, 2013, Scottsdale, Ariz., Technical Contact:, Larry Meddock, Water Sports Industry Association, Orlando, Fla., Phone: 407-620-7992; info@wsia.net , ASTM Staff Contact:, Leonard Morrissey, Phone: 610-832-9719; lmorrissey@astm.org , ASTM PR Contact:, Barbara Schindler, Phone: 610-832-9603; bschindl@astm.org Release #9379