Search
Advanced search
Filter by category
Filter by committee
Search results
-
ASTM International Committee D15 on Engine Coolants has formed three new subcommittees: Subcommittees D15.22 on Non-Aqueous Coolants ; D15.25 on Diesel Exhaust Fluid ; and D15.30 on Industrial Heat Transfer Fluids . All interested parties are invited to join in the standards developing activities of these new subcommittees., D15.22, Non-Aqueous Coolants, While there has been an increased interest in non-aqueous coolants industry, there are no current ASTM standards in this area. D15.22 will begin to develop such standards. “The envisioned standards for non-aqueous coolants would be performance standards, rather than ingredient standards, to allow for formulations that are not currently proprietary,” says Jonathan T. Light, chief engineer, Evans…, D15.25, Diesel Exhaust Fluid, Diesel exhaust fluid, often referred to as DEF, is required by many diesel engine-powered vehicles delivered after January 2010. More recent environmental standards issued by the U.S. Environmental Protection Agency have created more stringent emissions standards for agricultural, construction and forestry equipment. DEF is used to reduce nitrogen oxide emissions, which allows original equipment…, D15.30, Industrial Heat Transfer Fluids, Members of D15 recognized that changes in the antifreeze industry, including new manufacturing technologies, improved inhibitor chemistries and recycling technologies, would likely be adapted to the facilities industry as a natural course of innovation. Because D15 has experience developing standards that are technically similar to the facilities heat transfer industry, it was deemed appropriate…, ASTM Committee D15 Next Meeting:, May 17-18, May Committee Week, Anaheim, Calif., Technical Contact:, (D15.22) Jonathan T. Light, Evans Cooling Systems Inc., Sharon, Conn., Phone: 860-435-2418; jtlight@comcast.net ; (D15.25) Edward Eaton Sr., Amalgatech, Phoenix, Ariz., Phone: 602-252-0280; edeaton@amalgatech.com ; (D15.30) John Panasewicz, Clear Choice Antifreeze, Henderson, Colo., Phone: 303-227-9900; johnp@clearchoiceantifreeze.com, ASTM Staff Contact:, Joe Koury, Phone: 610-832-9804; jkoury@astm.org, ASTM PR Contact:, Barbara Schindler, Phone: 610-832-9603; bschindl@astm.org Release #8837
-
A proposed new standard being developed by ASTM International Committee F30 on Emergency Medical Services will be useful to medical equipment manufacturers, certification agencies and care providers, with patients being the ultimate beneficiaries. The proposed new standard, ASTM WK27973 , Specification for Environmental Performance of Medical Equipment for Use on Fixed and Rotary-Wing Aircraft,…, Technical Contact:, Pete Chambers, Marketing Assessment Inc., Phone: 703-673-9003; pete@marketingassessment.com, ASTM Staff Contact:, Scott Orthey, Phone: 610-832-9730; sorthey@astm.org, ASTM PR Contact:, Barbara Schindler, Phone: 610-832-9603; bschindl@astm.org Release #8671/Sept2010
-
ASTM International Committee F08 on Sports Equipment and Facilities is focusing on elliptical equipment in its two latest approved standards. Both F2810, Specification for Elliptical Trainers, and ASTM F2811 , Test Methods for Evaluating Design and Performance Characteristics of Elliptical Trainers, are under the jurisdiction of Subcommittee F08.30 on Fitness Products. Harvey Voris, vice…, ASTM Committee F08 Next Meeting:, Nov. 16-19, November Committee Week, San Antonio, Texas, Technical Contact:, Harvey Voris, Paramount Fitness Corp., Los Angeles, Calif., Phone: 323-721-2121; hvoris@paramountfitness.com, ASTM Staff Contact:, Christine Basile, Phone: 610-832-9728; cbasile@astm.org, ASTM PR Contact:, Barbara Schindler, Phone: 610-832-9603; bschindl@astm.org Release #8672/Sept2010
-
Proposed ASTM Kinetic Parameters Standard Being Developed by Hazard Potential of Chemicals CommitteeA proposed new standard being developed by ASTM International Committee E27 on Hazard Potential of Chemicals will provide needed reference materials for instruments, applications and software used for the evaluation of kinetic data used for hazard evaluation. The proposed new standard, ASTM WK27880 , Practice for Evaluation of Methods for Determination of Kinetic Parameters by Thermal Analysis,…, ASTM Committee E27 Next Meeting:, Nov. 15-17, November Committee Week, Tampa, Fla., Technical Contact:, Roger Blaine, Corvallis, Ore., Phone: 302-559-6827; roger.l.blaine@gmail.com, ASTM Staff Contact:, Scott Orthey, Phone: 610-832-9730; sorthey@astm.org, ASTM PR Contact:, Barbara Schindler, Phone: 610-832-9603; bschindl@astm.org Release #8611
-
A series of proposed new standards being developed by ASTM International Committee D15 on Engine Coolants would remove technical barriers that currently prevent the cost-effective replacement of ethylene glycol with more environmentally friendly glycerin in antifreeze. The proposed standards are under the jurisdiction of Subcommittee D15.93 on Research and Long Range Planning. Natural glycerin is…
-
Mass casualty events, including both natural disasters and man-made events, subject caregivers, patients and medical equipment to environmental extremes. A new standard being developed by ASTM International Committee F30 on Emergency Medical Services provides guidance for how medical equipment is expected to perform under the severe conditions of a mass casualty event. The proposed standard, ASTM…
-
In response to changing emissions restrictions and consumer expectations, ASTM International Committee D15 on Engine Coolants is now developing a proposed new standard, WK16003 , Specification for Engine Coolant Grade 1,3-propanediol (PDO). This task group is under the jurisdiction of Subcommittee D15.07 on Specifications. Edward Eaton, D15 member and chief engineer, Amalgatech, says that as…
-
ASTM International Committee F16 on Fasteners has recently approved an important new standard that deals with coated threaded fasteners and washers by hot-dip zinc galvanizing. The standard, F 2329, Specification for Zinc Coating, Hot-Dip, Requirements for Application to Carbon and Alloy Steel Bolts, Screws, Washers, Nuts and Special Threaded Fasteners, is under the jurisdiction of Subcommittee…
-
A process hazard analysis prior to the startup of a chemical processing facility is essential to prevent catastrophic incidents due to thermal runaway reactions. A proposed new ASTM standard, WK9584, Guide for Assessing Potential Hazards of Synthesis Reactions Using Reaction Calorimetry, will help to standardize how the results from reaction calorimetry experiments are used in a process hazard…
-
ASTM International Committee F16 on Fasteners has developed a new standard, F 2329, Specification for Zinc Coating, Hot-Dip, Requirements for Application to Carbon and Alloy Steel Bolts, Screws, Washers, Nuts, and Special Threaded Fasteners. The standard, which is under the jurisdiction of Subcommittee F16.03 on Coatings on Fasteners, covers the requirements for hot-dip zinc coating applied to…