Search
Advanced search
Filter by category
Filter by committee
Search results
-
ASTM International Committee D15 on Engine Coolants has formed three new subcommittees: Subcommittees D15.22 on Non-Aqueous Coolants ; D15.25 on Diesel Exhaust Fluid ; and D15.30 on Industrial Heat Transfer Fluids . All interested parties are invited to join in the standards developing activities of these new subcommittees., D15.22, Non-Aqueous Coolants, While there has been an increased interest in non-aqueous coolants industry, there are no current ASTM standards in this area. D15.22 will begin to develop such standards. “The envisioned standards for non-aqueous coolants would be performance standards, rather than ingredient standards, to allow for formulations that are not currently proprietary,” says Jonathan T. Light, chief engineer, Evans…, D15.25, Diesel Exhaust Fluid, Diesel exhaust fluid, often referred to as DEF, is required by many diesel engine-powered vehicles delivered after January 2010. More recent environmental standards issued by the U.S. Environmental Protection Agency have created more stringent emissions standards for agricultural, construction and forestry equipment. DEF is used to reduce nitrogen oxide emissions, which allows original equipment…, D15.30, Industrial Heat Transfer Fluids, Members of D15 recognized that changes in the antifreeze industry, including new manufacturing technologies, improved inhibitor chemistries and recycling technologies, would likely be adapted to the facilities industry as a natural course of innovation. Because D15 has experience developing standards that are technically similar to the facilities heat transfer industry, it was deemed appropriate…, ASTM Committee D15 Next Meeting:, May 17-18, May Committee Week, Anaheim, Calif., Technical Contact:, (D15.22) Jonathan T. Light, Evans Cooling Systems Inc., Sharon, Conn., Phone: 860-435-2418; jtlight@comcast.net ; (D15.25) Edward Eaton Sr., Amalgatech, Phoenix, Ariz., Phone: 602-252-0280; edeaton@amalgatech.com ; (D15.30) John Panasewicz, Clear Choice Antifreeze, Henderson, Colo., Phone: 303-227-9900; johnp@clearchoiceantifreeze.com, ASTM Staff Contact:, Joe Koury, Phone: 610-832-9804; jkoury@astm.org, ASTM PR Contact:, Barbara Schindler, Phone: 610-832-9603; bschindl@astm.org Release #8837
-
Fatigue fretting is the process of crack formation and progressive crack growth at a location in a mechanical system where two components are in contact and undergoing a vibratory loading. A new ASTM International standard provides insight on what conditions promote fretting fatigue and offers approaches to design an experiment to assess it. ASTM E2789 , Guide for Fretting Fatigue Testing, was…, ASTM Committee E08 Next Meeting:, May 16-20, May Committee Week, Anaheim, Calif., Technical Contact:, Richard W. Neu, Georgia Institute of Technology, Atlanta, Ga., Phone: 404-894-3074; rick.neu@gatech.edu ASTM Staff Contact: Jeff Adkins, Phone: 610-832-9738; jadkins@astm.org ASTM PR Contact: Barbara Schindler, Phone: 610-832-9603; bschindl@astm.org R elease #8809
-
Trona, or sodium sesquicarbonate, is a fine mineral powder that has proven to be effective at removing acid gases from air emissions. While trona can be a useful component of air pollution control systems, it can be difficult to handle, particularly when moisture is present. A proposed new ASTM standard will present a repeatable, precise and accurate test method for analyzing moisture levels in…, ASTM Committee E01 Next Meeting:, Nov. 14-17, November Committee Week, San Antonio, Texas, Technical Contact: J, ames D. Phillip, Solvay Chemicals Inc, Green River, Wyo., Phone: 307-872-6519; jim.phillip@solvay.com, ASTM Staff Contact:, Thomas O'Toole, Phone: 610-832-9739; totoole@astm.org, ASTM PR Contact:, Barbara Schindler, Phone: 610-832-9603; bschindl@astm.org Release #8608
-
A series of proposed new standards being developed by ASTM International Committee D15 on Engine Coolants would remove technical barriers that currently prevent the cost-effective replacement of ethylene glycol with more environmentally friendly glycerin in antifreeze. The proposed standards are under the jurisdiction of Subcommittee D15.93 on Research and Long Range Planning. Natural glycerin is…
-
Creep-fatigue testing simulates the loading and temperature conditions experienced by turbine components of aircraft engines, nuclear reactor components and fossil power plant components during service. With increasing need for cyclic operation during peak power demands, reliable creep-fatigue test data is necessary for the life assessment of aging power plants. A new ASTM standard, ASTM E2714 ,…
-
A proposed new ASTM standard will assist in establishing tests for fretting fatigue, an issue at attachments and joints in a variety of mechanical, aeronautical and biomedical engineering systems and devices. WK24298 , Guide for Fretting Fatigue Testing, is being developed by Subcommittee E08.05 on Cyclic Deformation and Fatigue Crack Formation, part of ASTM International Committee E08 on Fatigue…, ASTM Committee E08 Next Meeting:, May 17-20, 2010, May Committee Week, St. Louis, Mo., Technical Contact:, Richard W. Neu, Georgia Institute of Technology, Atlanta, Ga., Phone: 404-894-3074; rick.neu@gatech.edu, ASTM Staff Contact:, Jeff Adkins, Phone: 610-832-9738; jadkins@astm.org, ASTM PR Contact:, Barbara Schindler, Phone: 610-832-9603; bschindl@astm.org Release #8430/Dec2009
-
Test Method Covers Inductively Coupled Plasma Atomic Emission Spectrometry, A new ASTM International standard will help users properly prepare and analyze various nickel-based alloy samples by inductively coupled plasma emission spectrometry. The standard, ASTM E2594 , Test Method for Analysis of Nickel Alloys by Inductively Coupled Plasma Atomic Emission Spectrometry (Performance-Based Method), will assist users in preparing sample and calibration solutions and with…
-
Advancing gas analysis technology is leading to the development of a proposed new ASTM International standard, WK22331 , Test Method for Simultaneous Determination of Oxygen, Nitrogen and Hydrogen in Titanium and Titanium Alloys by the Inert Gas Fusion Technique. Analyzers are now available that can simultaneously test titanium and titanium alloys for oxygen, nitrogen and hydrogen. This…
-
Data produced from the use of a proposed new ASTM International standard will be employed in the design of new, more efficient aircraft engines as well as for piping, steam and gas turbines used in power generation. The proposed new standard, WK21984 , Test Method for Creep-Fatigue Crack Growth Rate Testing, is being developed by Subcommittee E08.06 on Crack Growth Behavior, part of ASTM…
-
All interested parties are invited to join in the ongoing development of a proposed new standard, WK19982 , Test Method for ICP Analysis of Calcium and Magnesium in Magnesium Ferrosilicon. WK19982 is being developed by Subcommittee E01.01 on Iron, Steel and Ferroalloys, part of ASTM International Committee E01 on Analytical Chemistry for Metals, Ores and Related Materials. According to Robert…