Search
Advanced search
Filter by category
Filter by committee
Search results
-
A new ASTM International standard will help test “sandwich” panels, which are flat, lightweight, durable products often used in the cabin floors and other areas of airplanes. The new standard (soon to be published as D8067, Test Method for In-Plane Shear Properties of Sandwich Panels Using a Picture Frame Fixture) was developed by the Committee on Composite Materials ( D30 ). Specifically, the…, ASTM Committee D30 on Composite Materials Next Meeting:, March 20-24, 2017, Salt Lake City, Utah, Media Inquiries:, Dan Bergels, tel +1.610.832.9602; dbergels@astm.org, Technical Contact:, Stephen H. Ward, SW Composites, Chula Vista, Calif., tel +1.619.691.2281; shward@taosnet.com, ASTM Staff Contact:, Krista Robbins, tel +1.610.832.9689; krobbins@astm.org R elease #10284
-
A new ASTM International specification supports the use of waterless coolants in car engines. Waterless coolants avoid the creation of water vapor pockets that can interrupt heat transfer from critical areas of an engine, helping prevent engine damage, enhance consumer safety, and more. According to ASTM International member Jonathan T. Light, non-aqueous engine coolants that conform to the new…, ASTM Committee D15 on Engine Coolants and Related Fluids Next Meeting:, May 17-18, 2017, Phoenix, Ariz., Media Inquiries:, Dan Bergels, tel +1.610.832.9602; dbergels@astm.org, Technical Contact:, Jonathan T. Light, Evans Cooling Systems, Inc., Suffield, Conn., tel +1.860.435.2418; jtlight@comcast.net, ASTM Staff Contact:, Ashley Wiand, tel +1.610.832.9551; awiand@astm.org Release #10255
-
Yesterday, more than 50 government and industry officials decided to launch a new ASTM International committee dedicated to developing standards in the area of commercial spaceflight. The Committee on Commercial Spaceflight (F47) will focus on standards development in areas such as occupant safety of orbital and suborbital vehicles, launch and reentry vehicles, and spaceports. James Thomas,…, Media Inquiries:, Dan Bergels, tel +1.610.832.9602; dbergels@astm.org, ASTM Staff Contact:, Kristy Straiton, tel +1.610.832.9640; kstraiton@astm.org Release #10195
-
A new ASTM International standard for heat transfer fluids will help create more efficient heating and air conditioning systems. The new standard (soon to be published as D8039, Specification for Freeze Point Depressed Heating and Air Conditioning (HVAC) Heat Transfer Fluids (HTF)) was developed by ASTM’s Committee on Engine Coolants and Related Fluids ( D15 ). Heat transfer fluids used in the…, D15 on Engine Coolants and Related Fluids Future Meeting:, Oct. 19-20, Dearborn, Michigan, Media Inquiries:, Dan Bergels, tel +1.610.832.9602; dbergels@astm.org, Technical Contact:, Edward R. Eaton Sr., Amalgatech, Phoenix, Ariz., tel +1.602.252.0280; edeaton@amalgatech.com , ASTM Staff Contact:, Ashley Wiand, tel +1.610.832.9551; awiand@astm.org Release #10188
-
With support from industry and government leaders, ASTM International will host an organizational meeting to potentially create a new technical committee that develops voluntary consensus standards for commercial spaceflight. This meeting comes in part as a result of the updated U.S. Commercial Space Launch Competitiveness Act of 2015 (CSLCA). The U.S. Federal Aviation Administration’s…, ASTM Commercial Spaceflight Meeting:, Oct. 24, 2016, RTCA, Inc.; 1150 18th St. NW, 4th Floor, Washington, DC 20036, Media Inquiries:, Dan Bergels, tel +1.610.832.9602; dbergels@astm.org, ASTM Staff Contact:, Christine DeJong, tel +1.610.832.9736; cdejong@astm.org Release #10170
-
ASTM International, the American Society for Composites, Syracuse University, the University of Utah, and the National Institute of Aerospace will jointly support the 31st Annual Technical Conference of the American Society for Composites (Sept. 19-21) and the ASTM Committee on Composite Materials (D30) meeting (Sept. 21-22). Both events will be in Williamsburg, Virginia. Information on the…, Media Inquiries:, Nathan Osburn, tel +1.610.832.9603; nosburn@astm.org, Technical Contact:, Ronald Krueger, National Institute of Aerospace, Hampton, Va., tel +1.757.864.3482; rkrueger@nianet.org , ASTM Staff Contact:, Krista Robbins, tel +1.610.832.9689; krobbins@astm.org Release #9969
-
Activated carbon is processed to have small, low-volume pores that increase the surface area available for adsorption. It has applications in the medical, environmental and energy realms, among others. Since 1962, ASTM International Committee D28 on Activated Carbon has developed standards that play a pre-eminent role in how activated carbon is used. A D28 subcommittee, D28.02 on Liquid Phase…, WK47401, Xylenol Orange Dye, The xylenol orange dye test is a way to determine the relative adsorption rate of unused or reactivated carbons by adsorption of xylenol orange from aqueous solution. This is an important means for deciding which type of activated carbon to use to a specific water treatment application. “Activated carbon performance can roughly be defined as a combination of the ability to adsorb a particular…, WK47421, Particle Size Distribution, Mercury flue gas, home water filters and potable water treatment are the main applications in which powdered and fine mesh carbons are used. A proposed new test method will describe how a laser light scattering technique can determine the particle size distribution of fine mesh activated carbon. ASTM member Neal Megonnell, vice president, sales and marketing, Haycarb USA, says the proposed test…, ASTM Committee D28 Next Meeting:, April 27, April Committee Week, Anaheim, Calif., Technical Contact:, (WK47401) Adam Redding, Ph.D., Evoqua Water Technologies LLC, Northwest, Pa., tel +1.724.719.0805; adam.redding@evoqua.com and (WK47421) Neal E. Megonnell, Haycarb USA, Pittsburgh, Pa., tel +1.412.709.7487; neal@haycarbusa.com, ASTM Staff Contact:, Kelly Paul, tel +1.610.832.9745; kpaul@astm.org, ASTM PR Contact:, Barbara Schindler, tel +1.610.832.9603; bschindl@astm.org Release #9731
-
Maybe you haven’t given much thought to the growth of interlaminar cracks, or cracks in between layers, in laminated composite materials. Perhaps you should though, because such materials are everywhere and interlaminar cracks can cause serious damage to many types of structures and products, from sports equipment to spacecraft. This is why a new ASTM standard, D7905/D7905M , Test Method for…, Technical Contact:, Barry D. Davidson, Ph.D. Syracuse University, Syracuse, N.Y., tel +1.315.443.4201; bddavids@syr.edu, ASTM Staff Contact:, Ashley Wiand, tel +1.610.832.9551; awiand@astm.org, ASTM PR Contact:, Barbara Schindler, tel +1.610.832.9603; bschindl@astm.org Release #9724
-
An important ASTM engine coolant standard, ASTM D3321 , Test Method for Use of the Refractometer for Field Test Determination of the Freezing Point of Aqueous Engine Coolants, has recently been revised to reflect advances in engine coolant technology used in modern engines. ASTM D3321 is under the jurisdiction of Subcommittee D15.03 on Physical Properties , part of ASTM International Committee…, ASTM Committee D15 Next Meeting:, May 21-22, 2013, May Committee Week, Indianapolis, Ind., Technical Contact:, Frederick C. Alverson, Shell Global Solutions, Houston, Texas, Phone: 281-544-9217; frederick.alverson@shell.com, ASTM Staff Contact:, Joe Koury, Phone: 610-832-9804; jkoury@astm.org, ASTM PR Contact:, Barbara Schindler, Phone: 610-832-9603; bschindl@astm.org R elease #9274
-
A new ASTM International standard fills an industry need for damage resistance testing of sandwich constructions, a common composite structural configuration. ASTM D7766/D7766M , Practice for Damage Resistance Testing of Sandwich Constructions, was developed by Subcommittee D30.09 on Sandwich Construction , part of ASTM International Committee D30 on Composite Materials . “ASTM D7766/D7766M will…, Technical Contact:, Adam J. Sawicki, Boeing Co., Philadelphia, Pa., Phone: 610-591-2807; adam.j.sawicki@boeing.com, ASTM Staff Contact:, Ashley Wiand, Phone: 610-832-9551; awiand@astm.org, ASTM PR Contact:, Barbara Schindler, Phone: 610-832-9603; bschindl@astm.org R elease #9195