Search
Advanced search
Filter by category
Filter by committee
Search results
-
ASTM International is developing a proposed standard that will help manufacturers of automatic guided industrial vehicles evaluate their products. In addition to manufacturers, vehicle buyers will use this standard (WK48955: Test Method for Docking and Navigation for Driverless Automatic Guided Industrial Vehicles) to conduct their own tests on potential purchases. ASTM member Roger Bostelman is…, Media Inquiries:, Nathan Osburn, tel +1.610.832.9603; nosburn@astm.org, Technical Contact:, Roger V. Bostelman, National Institute of Standards and Technology, Gaithersburg, Md., tel +1.301.975.3426; roger.bostelman@nist.gov, ASTM Staff Contact:, Pat Picariello, tel +1.610.832.9720; ppicariello@astm.org Release #9811 ###
-
ASTM International has launched a new technical committee, F45 on Driverless Automatic Guided Industrial Vehicles . After organizational meetings in October 2013 and January 2014, F45 was approved at the board of director’s recent spring meeting. In use since 1953, automated guided vehicles (AGVs) are defined by the Material Handling Institute (MHI) as “computer-controlled wheel-based load…, Technical Contact:, Roger Bostelman, National Institute of Standards and Technology, Gaithersburg, Md., roger.bostelman@nist.gov , ASTM Staff Contact:, Pat Picariello, Phone: 610-832-9720; ppicariello@astm.org, ASTM PR Contact:, Barbara Schindler, Phone: 610-832-9603; bschindl@astm.org Release #9650
-
A new ASTM International standard sets quality requirements for the manufacture, documentation and records retention for light sport aircraft designed to ASTM consensus standards. ASTM F2972 , Specification for Light Sport Aircraft Manufacturer’s Quality Assurance System, was developed by Subcommittee F37.70 on Cross Cutting , part of ASTM International Committee F37 on Light Sport Aircraft .…, ASTM Committee F37 Next Meeting:, April 22-23, 2013, Messe Friedrichshafen GmbH, Friedrichshafen, Germany, Technical Contact:, Adam J. Morrison, Streamline Designs LLC, Greenwood, Ind., Phone: 317-888-1026; adam.morrison@sportplanedesign.com, ASTM Staff Contact:, Christine DeJong, Phone: 610-832-9736; cdejong@astm.org, ASTM PR Contact:, Barbara Schindler, Phone: 610-832-9603; bschindl@astm.org Release #9315
-
An important ASTM engine coolant standard, ASTM D3321 , Test Method for Use of the Refractometer for Field Test Determination of the Freezing Point of Aqueous Engine Coolants, has recently been revised to reflect advances in engine coolant technology used in modern engines. ASTM D3321 is under the jurisdiction of Subcommittee D15.03 on Physical Properties , part of ASTM International Committee…, ASTM Committee D15 Next Meeting:, May 21-22, 2013, May Committee Week, Indianapolis, Ind., Technical Contact:, Frederick C. Alverson, Shell Global Solutions, Houston, Texas, Phone: 281-544-9217; frederick.alverson@shell.com, ASTM Staff Contact:, Joe Koury, Phone: 610-832-9804; jkoury@astm.org, ASTM PR Contact:, Barbara Schindler, Phone: 610-832-9603; bschindl@astm.org R elease #9274
-
ASTM International Committee F37 on Light Sport Aircraft will host the International Workshop on Electric Aircraft Standardization on March 28 at the Hilton Garden Inn in Lakeland, Fla. The workshop is being held in conjunction with Committee F37’s standards development meetings at the 38th Annual SUN ‘n FUN International Fly-In and Expo. The marketplace adoption of electric aircraft requires…
-
On July 29, 2011, the U.S. Federal Aviation Administration announced in the Federal Register the availability of ASTM International standard F2746–09 , Specification for Pilot’s Operating Handbook (POH) for Light Sport Airplane, as well as ASTM F2245-10c , Specification for Design and Performance of a Light Sport Airplane. Manufacturers of fixed wing light sport aircraft are required to revise…
-
A new ASTM International standard will be used to aid in the creation of auditing programs within the light sport aircraft industry. ASTM F2839 , Practice for Compliance Audits to ASTM Standards on Light Sport Aircraft, was developed by Subcommittee F37.70 on Cross Cutting , part of ASTM International Committee F37 on Light Sport Aircraft . The new practice specifies the minimum methods and…
-
ASTM International Committee D15 on Engine Coolants has formed three new subcommittees: Subcommittees D15.22 on Non-Aqueous Coolants ; D15.25 on Diesel Exhaust Fluid ; and D15.30 on Industrial Heat Transfer Fluids . All interested parties are invited to join in the standards developing activities of these new subcommittees., D15.22, Non-Aqueous Coolants, While there has been an increased interest in non-aqueous coolants industry, there are no current ASTM standards in this area. D15.22 will begin to develop such standards. “The envisioned standards for non-aqueous coolants would be performance standards, rather than ingredient standards, to allow for formulations that are not currently proprietary,” says Jonathan T. Light, chief engineer, Evans…, D15.25, Diesel Exhaust Fluid, Diesel exhaust fluid, often referred to as DEF, is required by many diesel engine-powered vehicles delivered after January 2010. More recent environmental standards issued by the U.S. Environmental Protection Agency have created more stringent emissions standards for agricultural, construction and forestry equipment. DEF is used to reduce nitrogen oxide emissions, which allows original equipment…, D15.30, Industrial Heat Transfer Fluids, Members of D15 recognized that changes in the antifreeze industry, including new manufacturing technologies, improved inhibitor chemistries and recycling technologies, would likely be adapted to the facilities industry as a natural course of innovation. Because D15 has experience developing standards that are technically similar to the facilities heat transfer industry, it was deemed appropriate…, ASTM Committee D15 Next Meeting:, May 17-18, May Committee Week, Anaheim, Calif., Technical Contact:, (D15.22) Jonathan T. Light, Evans Cooling Systems Inc., Sharon, Conn., Phone: 860-435-2418; jtlight@comcast.net ; (D15.25) Edward Eaton Sr., Amalgatech, Phoenix, Ariz., Phone: 602-252-0280; edeaton@amalgatech.com ; (D15.30) John Panasewicz, Clear Choice Antifreeze, Henderson, Colo., Phone: 303-227-9900; johnp@clearchoiceantifreeze.com, ASTM Staff Contact:, Joe Koury, Phone: 610-832-9804; jkoury@astm.org, ASTM PR Contact:, Barbara Schindler, Phone: 610-832-9603; bschindl@astm.org Release #8837
-
A need for a scientifically based procedure to identify equivalent test severity conditions between a 1.707-m diameter laboratory roadwheel surface and a flat or highway surface for radial pneumatic light truck tires has led to the development and approval of a new ASTM International standard. The new standard, ASTM F2869 , Practice for Radial Light Truck Tires to Establish Equivalent Test…
-
In the Transportation Recall Enhancement, Accountability and Documentation Act, the U.S. Congress indicated the need for an aging test on light vehicle tires. Since no industry or government standard addressed this subject, ASTM Committee F09 on Tires developed ASTM F2838 , Practice for Accelerated Laboratory Aging of Radial Passenger Car and Light Truck Tire Through Load Range E for the…