Search
Advanced search
Filter by category
Filter by committee
Search results
-
ASTM International Committee D15 on Engine Coolants has formed three new subcommittees: Subcommittees D15.22 on Non-Aqueous Coolants ; D15.25 on Diesel Exhaust Fluid ; and D15.30 on Industrial Heat Transfer Fluids . All interested parties are invited to join in the standards developing activities of these new subcommittees., D15.22, Non-Aqueous Coolants, While there has been an increased interest in non-aqueous coolants industry, there are no current ASTM standards in this area. D15.22 will begin to develop such standards. “The envisioned standards for non-aqueous coolants would be performance standards, rather than ingredient standards, to allow for formulations that are not currently proprietary,” says Jonathan T. Light, chief engineer, Evans…, D15.25, Diesel Exhaust Fluid, Diesel exhaust fluid, often referred to as DEF, is required by many diesel engine-powered vehicles delivered after January 2010. More recent environmental standards issued by the U.S. Environmental Protection Agency have created more stringent emissions standards for agricultural, construction and forestry equipment. DEF is used to reduce nitrogen oxide emissions, which allows original equipment…, D15.30, Industrial Heat Transfer Fluids, Members of D15 recognized that changes in the antifreeze industry, including new manufacturing technologies, improved inhibitor chemistries and recycling technologies, would likely be adapted to the facilities industry as a natural course of innovation. Because D15 has experience developing standards that are technically similar to the facilities heat transfer industry, it was deemed appropriate…, ASTM Committee D15 Next Meeting:, May 17-18, May Committee Week, Anaheim, Calif., Technical Contact:, (D15.22) Jonathan T. Light, Evans Cooling Systems Inc., Sharon, Conn., Phone: 860-435-2418; jtlight@comcast.net ; (D15.25) Edward Eaton Sr., Amalgatech, Phoenix, Ariz., Phone: 602-252-0280; edeaton@amalgatech.com ; (D15.30) John Panasewicz, Clear Choice Antifreeze, Henderson, Colo., Phone: 303-227-9900; johnp@clearchoiceantifreeze.com, ASTM Staff Contact:, Joe Koury, Phone: 610-832-9804; jkoury@astm.org, ASTM PR Contact:, Barbara Schindler, Phone: 610-832-9603; bschindl@astm.org Release #8837
-
A need for a scientifically based procedure to identify equivalent test severity conditions between a 1.707-m diameter laboratory roadwheel surface and a flat or highway surface for radial pneumatic light truck tires has led to the development and approval of a new ASTM International standard. The new standard, ASTM F2869 , Practice for Radial Light Truck Tires to Establish Equivalent Test…
-
Due to risk of infection from blood-borne pathogens such as human immunodeficiency virus and hepatitis C, hypodermic needle sticks pose a life-safety risk to healthcare professionals, law enforcement officials, sanitation workers and others. A new ASTM International standard addresses the unique mechanics of hypodermic needle puncture as related to protective clothing. ASTM F2878 , Test Method…
-
In the Transportation Recall Enhancement, Accountability and Documentation Act, the U.S. Congress indicated the need for an aging test on light vehicle tires. Since no industry or government standard addressed this subject, ASTM Committee F09 on Tires developed ASTM F2838 , Practice for Accelerated Laboratory Aging of Radial Passenger Car and Light Truck Tire Through Load Range E for the…
-
The purpose of a laboratory roadwheel test is to realistically evaluate tires for specific road conditions. To facilitate such tests, ASTM International Committee F09 on Tires has developed a practice to provide an industry standard for commercial radial truck-bus tire laboratory temperature algorithms. The algorithms equilibrate with flat surface (highway) operating temperatures to determine…
-
A series of proposed new standards being developed by ASTM International Committee D15 on Engine Coolants would remove technical barriers that currently prevent the cost-effective replacement of ethylene glycol with more environmentally friendly glycerin in antifreeze. The proposed standards are under the jurisdiction of Subcommittee D15.93 on Research and Long Range Planning. Natural glycerin is…
-
All interested parties are invited to participate in the standards developing work of Subcommittee F23.50 on Certification and PPE Interoperability, part of ASTM International Committee F23 on Personal Protective Clothing and Equipment. The subcommittee, which was formed in 2009, is currently working on a proposed new standard, WK27616 , Practice for a Product Certification Process. According to…
-
A proposed new ASTM International standard for liquid threats on protective clothing will cover the specific needs of law enforcement officers. The new standard, ASTM WK25965 , Test Method for Liquid Threat Sprayed on a Mannequin, is being developed by Subcommittee F23.30 on Chemicals, part of ASTM International Committee F23 on Personal Protective Clothing and Equipment. Fire and hazardous…
-
A rim slip performance test for tires that has been done at the Nevada Automotive Test Center for more than 20 years has now become an ASTM International standard. ASTM F2803 , Test Method for Evaluating Rim Slip Performance of Tires and Wheels, was developed by Subcommittee F09.20 on Vehicular Testing, part of ASTM International Committee F09 on Tires. Rim slip occurs when tire and wheel…, ASTM Committee F09 Next Meeting:, April 21-22, April committee week, St. Louis, Mo., Technical Contact:, Jason Whiteley, Nevada Automotive Test Center, Silver Springs, Nev., Phone: 775-629-2000, jwhiteley@natc-ht.com, ASTM Staff Contact:, Rick Lake, Phone: 610-832-9689; rlake@astm.org, ASTM PR Contact:, Barbara Schindler, Phone: 610-832-9603; bschindl@astm.org Release #8494/Feb2010
-
The ability to provide the correct amount of protection is one of the important elements in the development of protective clothing worn by individuals who apply pesticides as part of their jobs. While overprotection in hot climatic conditions can result in heat stress and low compliance, some of the existing design-based requirements can result in too little protection, as material performance…, CONTACT:, ASTM Committee F23 Next Meeting:, Jan. 26-28, 2010, January committee week, San Antonio, Texas, Technical Contact:, Anugrah Shaw, University of Maryland Eastern Shore, Princess Anne, Md., Phone: 410-651-6064; ashaw@umes.edu, ASTM Staff Contact:, Stephen Mawn, ASTM International, Phone: 610-832-9726; smawn@astm.org, ASTM PR Contact:, Barbara Schindler, ASTM International, Phone: 610-832-9603; bschindl@astm.org Release #84 54/Jan2010