Search
Advanced search
Filter by category
Filter by committee
Search results
-
A new ASTM test method will test the strength and durability of wood-to-wood adhesives when put under pressures of weight, temperature and humidity. This “creep resistance” standard will soon be available for purchase as ASTM D7966, Test Method for Resistance to Creep of Adhesives in Static Shear by Compression Loading (Wood-to-Wood). Wood-to-wood adhesives are an increasingly essential part of…, ASTM Committee D14 Next Meeting:, April 26-28, 2015, April Committee Week, Anaheim, Calif., Media Inquiries:, Nathan Osburn, tel +1.610.832.9603; nosburn@astm.org, Technical Contact:, Mark Clark, Momentive Specialty Chemicals Inc., Springfield, Ore., tel +1.541.741.6674; mark.clark@momentive.com, ASTM Staff Contact:, Joseph Hugo, tel +1.610.832.9740; jhugo@astm.org Release #9799 ###
-
A new ASTM International standard, ASTM E2872 , Guide for Determining Cross-Section Averaged Characteristics of a Spray Using Laser-Diffraction Instruments in a Wind Tunnel Apparatus, will be used to guide the characterization of nozzles and atomizers using laser diffraction instruments. ASTM E2872 is primarily applicable to aerial agricultural spraying, aerial forest sprays and air-blast…, ASTM Committee E29 Next Meeting:, Oct. 6-7, 2014, October Committee Week, New Orleans, La., Technical Contact:, Gordon Holloway Ph.D., University of New Brunswick, Fredericton, New Brunswick, Canada; Phone: 506-447-3108; holloway@unb.ca, ASTM Staff Contact:, Katerina Koperna, Phone: 610-832-9728; kkoperna@astm.org , ASTM PR Contact:, Barbara Schindler, Phone: 610-832-9603; bschindl@astm.org Release #9592
-
A large and diverse set of manufactured materials are in powdered form at one stage or another. No matter what the material is, from cement to metered dose inhaler ingredients, product performance is related to particle size distribution. “The strength of concrete is related to the fineness of the cement powder used, but the danger with very fine grades is excessive heating on setting,” says…, ASTM Committee E29 Next Meeting:, Oct. 6-7, 2014, October Committee Week, New Orleans, La., Technical Contact:, Alan F. Rawle, Ph.D., Malvern Instruments, Westborough, Mass., Phone: 508-768-6434; alan.rawle@malvern.com , ASTM Staff Contact:, Katerina Koperna, Phone: 610-832-9728; kkoperna@astm.org , ASTM PR Contact:, Barbara Schindler, Phone: 610-832-9603; bschindl@astm.org Release #9576
-
A new ASTM International standard will provide a qualitative means to determine the potential effect of plasticizers contained within polyvinylchloride floor covering materials on a specific adhesive. ASTM D7888 , Practice for Evaluating Adhesive and the Effects of Plasticizer Found Within Polyvinylchloride-Backed Floor Coverings, was developed by Subcommittee D14.10 on Working Properties, part…, ASTM Committee D14 Next Meeting:, April 6-8, 2014, April Committee Week, Toronto, Ontario, Canada, Technical Contact:, Larry Press, Helmitin Adhesives Inc., Jacksonville, Fla., Phone: 904-765-2364; l.press@helmit inadehesives.com , ASTM Staff Contact:, Joseph Hugo, Phone: 610-832-9740; jhugo@astm.org , ASTM PR Contact:, Barbara Schindler, Phone: 610-832-9603; bschindl@astm.org Release #9533
-
ASTM Fence Committee Approves New Standards on Ornamental Aluminum Fencing and Polymer Privacy SlatsASTM International Committee F14 on Fences has recently approved two new standards: ASTM F2957 , Specification for Ornamental Aluminum Fence Systems; and ASTM F3000/F3000M , Specification for Polymer Privacy Insert Slats for Chain Link Fabric and Privacy Chain Link Fabric Manufactured Containing Pre-Installed Privacy Slats., Ornamental Aluminum Fence Systems, ASTM F2957 was developed by Subcommittee F14.35 on Architectural Metal Fence Systems. The new standard defines minimum selection criteria and test procedures to ensure product users that an ornamental aluminum fence system has sufficient strength to withstand reasonable loads and forces, and has the appropriate combination of material and organic coating surface protection to withstand effects of…, Polymer Privacy Insert Slats, ASTM F3000/F3000M is under the jurisdiction of Subcommittee F14.40 on Chain Link Fence and Wire Accessories . ASTM F3000/F3000M covers both inserted slats that are placed into chain link fabric after the fence has been installed as well as slats that are pre-inserted into chain link mesh during the link weaving process. According to William Ullrich, principal, Link Consulting LLC, and an F14…, ASTM Committee F14 Next Meeting:, June 25, 2013, ASTM International Headquarters, West Conshohocken, Pa., Technical Contact:, (ASTM F2957) Larry Burkholder, Digger Specialties Inc., Bremen, Ind., Phone: 574-546-5999; lburkholder@diggerspecialties.com; (ASTM F3000/F3000M) William Ullrich, Link Consulting LLC, Annapolis, Md., Phone: 410-849-2610; bullrich.link@comcast.net , ASTM Staff Contact:, Thomas O’Toole, Phone: 610-832-9739; totoole@astm.org , ASTM PR Contact:, Barbara Schindler, Phone: 610-832-9603; bschindl@astm.org Release #9375
-
A newly revised ASTM terminology standard reflects the latest technological advances in particle size analysis (standard test sieves) and particle separation (screening media). ASTM E1638 , Terminology Relating to Sieves, Sieving Methods and Screening Media, was developed by Subcommittee E29.01 on Sieves, Sieving Methods and Screening Media , part of ASTM International Committee E29 on Particle…, ASTM Committee E29 Next Meeting:, May 1-2, 2013, in conjunction with B09 May meeting, Ft. Lauderdale Beach, Fla., Technical Contact:, Kenneth H. Beyer, American Wire Cloth Institute, Elizabeth, N.J., Phone: 908-688-4600; ken@uniquewire.com, ASTM Staff Contact:, Katerina Koperna, Phone: 610-832-9728; kkoperna@astm.org, ASTM PR Contact:, Barbara Schindler, Phone: 610-832-9603; bschindl@astm.org Release #9290
-
Many manufacturers have their own methods for testing adhesives for carpet or resilient or wood floor coverings. A new ASTM standard addresses this inconsistency by presenting a set of adhesive requirements that can be used throughout the floor covering industry. The new standard, ASTM D7799 , Specification for Tufted and Woven Broadloom Carpet Adhesives Without Homogenous PVC or Non-PVC Backings…
-
Slats inserted into chain link fences can provide up to 95 percent more privacy and enhance the aesthetic appeal of a fence. A proposed new ASTM International specification will answer the need for better standardization of these privacy slats. ASTM WK36470 , Specification for Privacy Slats for Chain Link Fence, is being developed by Subcommittee F14.40 on Chain Link Fence and Wire Accessories ,…
-
ASTM International Committee F14 on Fences welcomes participation in the development of a proposed new standard, ASTM WK36054 , Guide for Anchoring Steel Fence and Gate Posts in Lieu of Concrete Footings. The proposed standard is under the jurisdiction of Subcommittee F14.15 on Other Fence Systems and Components . According to Ray Statz, chairman, Qual Line Fence Corp., and chairman of F14.15,…
-
A new ASTM International standard covers a special grade of industrial woven wire cloth called filter cloth for general filtration, including the separation of solids from fluids. ASTM E2814 , Guide for Industrial Woven Wire Filter Cloth, was developed by Subcommittee E29.01 on Sieves, Sieving Methods and Screening Media , part of ASTM International Committee E29 on Particle and Spray…, ASTM Committee E29 Next Meeting:, Oct. 31-Nov. 1, 2011, October Committee Week, Tampa, Fla., Technical Contact:, Ken Beyer, Unique Wire Weaving Co., Hillside, N.J., Phone: 908-688-4600; ken@uniquewire.com, ASTM Staff Contact:, Christine Sierk, Phone: 610-832-9728; csierk@astm.org, ASTM PR Contact:, Barbara Schindler, Phone: 610-832-9603; bschindl@astm.org Release #8934