Search
Advanced search
Filter by category
Filter by committee
Search results
-
A new ASTM International standard identifies and defines sustainable laundry best management practices that are used by commercial laundry facilities to reduce their impact on the environment. ASTM D7841 , Practice for Sustainable Laundry Best Management Practices, was developed by Subcommittee D13.40 on Sustainability of Textiles , part of ASTM International Committee D13 on Textiles . “D7841…, Water Reuse Technology, —Technology or equipment within a laundry facility that reuses, reclaims or recycles water •, Boiler Heat Recovery, —Technology or equipment within a laundry facility that recovers heat produced from the facility’s water boiler system •, Energy Efficient Low-Temperature Detergents, —Detergents that are effective in eliminating pathogenic bacteria at low-wash temperatures •, Alternative Energy, —Solar or geothermal energy that clearly provides a minimum of 10 percent of the electrical energy used in the laundry •, Fleet Vehicle Route Optimization, —Use of software or technologies to maximize the efficiency of routes driven by fleet vehicles •, Recycling Programs, —Qualified waste recycling programs within a laundry facility Freeman, a D13.40 member, says industries that rely on the use of delivered laundered textiles will be the primary users of D7841 . “We expect D7841 to build awareness in the textile services marketplace of laundry sustainability, not only as an indicator of a provider’s longevity, but their ability to produce cost-effectively,” says…, ASTM Committee D13 Next Meeting:, Jan. 26-29, 2014, January Committee Week, Houston, Texas, Technical Contact:, Angela D. Freeman, TRSA, Alexandria, Va., Phone: 703-519-0029, ext. 111; afreeman@trsa.org, ASTM Staff Contact:, Jennifer Rodgers, Phone: 610-832-9694; jrodgers@astm.org , ASTM PR Contact:, Barbara Schindler, Phone: 610-832-9603; bschindl@astm.org Release #9462
-
All interested parties are invited to join in the ongoing development of ASTM International standard ASTM D3181 , Guide for Conducting Wear Tests on Textiles. The standard is now under the jurisdiction of Subcommittee D13.60 on Fabric Test Methods, Specific , part of ASTM International Committee D13 on Textiles . ASTM D3181 is used to provide data that will help predict the expected wear…, ASTM Committee D13 Next Meeting:, June 9-12, 2013, June Committee Week, Indianapolis, Ind., Technical Contact:, Norma M. Keyes, Keyes Consulting LLC, Apex, N.C., Phone: 919-362-4044; keyesconsult@att.net, ASTM Staff Contact:, Jennifer Rodgers, Phone: 610-832-9694; jrodgers@astm.org, ASTM PR Contact:, Barbara Schindler, Phone: 610-832-9603; bschindl@astm.org Release #9320
-
ASTM International Committee E11 on Quality and Statistics has approved the last in a series of ASTM standards that preserve military sampling standards that were originally under the jurisdiction of the U.S. Department of Defense. The new standard, ASTM E2910 , Guide for Preferred Methods for Acceptance of Product, preserves MIL-STD-1916 in its original form. ASTM E2910 is under the jurisdiction…, ASTM Committee E11 Next Meeting:, May 8-10, 2013, ASTM International Headquarters, West Conshohocken, Pa., Technical Contact:, Dean V. Neubauer, Corning, Inc., Corning, N.Y., Phone: 607-974-6777; neubauerdv@corning.com, ASTM Staff Contact:, Katerina Koperna, Phone: 610-832-9728; kkoperna@astm.org, ASTM PR Contact:, Barbara Schindler, Phone: 610-832-9603; bschindl@astm.org Release #9317
-
New ASTM Committee F44 to Develop Standards That Will Streamline Certification Process, Empower Innovation, ASTM International announces the formation of Committee F44 on General Aviation Aircraft , bringing together global stakeholders to work on a standards roadmap that will help transform the way smaller aircraft are manufactured and certified around the world. The new ASTM Committee F44 was formed at the request of aviation industry organizations in support of the efforts of the Federal Aviation…, Driving Change through ASTM Consensus Standards, The efforts of Committee F44 will play a critical role in supporting the overhaul of Part 23 regulations into what the FAA envisions as more of a performance-based document. Industry-driven F44 standards for the design and airworthiness of general aviation aircraft will serve to better align aircraft certification requirements with the type of operation the aircraft will experience. “Simplified,…, ASTM International: Global Heritage in Aviation Standards Development, ASTM’s broad portfolio of aviation-related standards has been created through the work of its existing technical committees dedicated to the field, including F07 on Aerospace and Aircraft , F37 on Light Sport Aircraft and F39 on Aircraft Systems . More than 20 Committee F37 standards have been cited by the FAA in regulations governing light sport aircraft. Similar to the membership of the Part 23…, ASTM Staff Contact:, Christine DeJong, Phone: 610-832-9736; cdejong@astm.org, ASTM PR Contact:, Barbara Schindler; Phone: 610-832-9603; bschindl@astm.org R elease #9242
-
ASTM International, in support of efforts stemming from the Part 23 Reorganization Aviation Rulemaking Committee (ARC), will host an organizational meeting for the establishment of a new ASTM standards activity on general aviation (GA) airworthiness design standards. The meeting will be held Sept. 17, from 1:00 p.m. to 4:00 p.m. EST, at the Aircraft Electronics Association headquarters in Lee’s…, Next Meeting:, Sept. 17 at AEA headquarters and Oct. 26 in Atlanta, Ga., ASTM Staff Contact:, Christine DeJong, Phone: 610-832-9736; cdejong@astm.org, ASTM PR Contact:, Barbara Schindler, Phone: 610-832-9603; bschindl@astm.org R elease #9277
-
In many testing laboratories, it can be necessary to qualify a new test method, instrument or lab itself with respect to one or more performance characteristics. One such key characteristic is bias, or mutual agreement of average test results run on the same material. A proposed ASTM standard will aid in the determination of bias equivalency. ASTM WK37659 , Guide for Testing for Bias Equivalency…
-
Subcommittee D13.21 on Pile Floor Coverings is seeking experts who may be using ASTM D5251 , Practice for the Operation of the Tetrapod Walker Drum Tester. ASTM D5251 describes the equipment and operation of the Tetrapod Walker for testing unused pile floor coverings with a thickness of 20 mm or less. The subcommittee is hoping to gauge the current level of interest in ASTM D5251. D13.21, which…
-
All interested parties are invited to join in the development of a proposed new ASTM International standard that will identify and define sustainable best management practices that are used in commercial laundry facilities to reduce their impact on the environment. ASTM WK35985 , Practice for Sustainable Laundry Best Management Practices, is being developed by Subcommittee D13.40 on…, ASTM Committee D13 Next Meeting:, June 24-27, 2012, June committee week, San Diego, Calif., Technical Contact:, Gary D. Gramp, Textile Rental Services Association, Alexandria, Va., Phone: 703-519-0029, ext. 111; ggramp@trsa.org, ASTM Staff Contact:, Jennifer Rodgers, Phone: 610-832-9694; jrodgers@astm.org, ASTM PR Contact:, Barbara Schindler, Phone: 610-832-9603; bschindl@astm.org R elease #9101
-
For several years, ASTM International Committee E11 on Quality and Statistics has been preserving military sampling standards no longer supported by the U.S. Department of Defense. The latest ASTM standard to emerge from this program is ASTM E2819 , Practice for Single- and Multi-Level Continuous Sampling of a Stream of Product by Attributes Indexed by AQL. “The reason for preserving military…
-
Interested parties are invited to join in the development of a new proposed standard being developed by ASTM International Committee E11 on Quality and Statistics . ASTM WK32565 , Guide for the Use of Non-Parametric Statistical Methods, is under the jurisdiction of Subcommittee E11.10 on Sampling/Statistics . According to Stephen Luko, statistician, Hamilton Sundstrand, Shared Engineering…, ASTM Committee E11 Next Meeting:, Oct. 26-28, 2011, ASTM International Headquarters, West Conshohocken, Pa., Technical Contact:, Stephen N. Luko, Hamilton Sunstrand, Shared Engineering Services, Windsor Locks, Conn., Phone: 860-654-3447; stephen.luko@hs.utc.com, ASTM Staff Contact:, Christine Sierk, Phone: 610-832-9728; csierk@astm.org Release #8978