Search
Advanced search
Filter by category
Filter by committee
Search results
-
A new ASTM International standard identifies and defines sustainable laundry best management practices that are used by commercial laundry facilities to reduce their impact on the environment. ASTM D7841 , Practice for Sustainable Laundry Best Management Practices, was developed by Subcommittee D13.40 on Sustainability of Textiles , part of ASTM International Committee D13 on Textiles . “D7841…, Water Reuse Technology, —Technology or equipment within a laundry facility that reuses, reclaims or recycles water •, Boiler Heat Recovery, —Technology or equipment within a laundry facility that recovers heat produced from the facility’s water boiler system •, Energy Efficient Low-Temperature Detergents, —Detergents that are effective in eliminating pathogenic bacteria at low-wash temperatures •, Alternative Energy, —Solar or geothermal energy that clearly provides a minimum of 10 percent of the electrical energy used in the laundry •, Fleet Vehicle Route Optimization, —Use of software or technologies to maximize the efficiency of routes driven by fleet vehicles •, Recycling Programs, —Qualified waste recycling programs within a laundry facility Freeman, a D13.40 member, says industries that rely on the use of delivered laundered textiles will be the primary users of D7841 . “We expect D7841 to build awareness in the textile services marketplace of laundry sustainability, not only as an indicator of a provider’s longevity, but their ability to produce cost-effectively,” says…, ASTM Committee D13 Next Meeting:, Jan. 26-29, 2014, January Committee Week, Houston, Texas, Technical Contact:, Angela D. Freeman, TRSA, Alexandria, Va., Phone: 703-519-0029, ext. 111; afreeman@trsa.org, ASTM Staff Contact:, Jennifer Rodgers, Phone: 610-832-9694; jrodgers@astm.org , ASTM PR Contact:, Barbara Schindler, Phone: 610-832-9603; bschindl@astm.org Release #9462
-
The popularity of trampoline courts has grown rapidly. While there were initially just a handful of such facilities on the West Coast of the United States in 2007, there are now approximately 160 trampoline parks throughout the world. Due to deep interest from a wide variety of stakeholders, a new standard for trampoline courts has been approved by ASTM International. The new standard, ASTM F2970…, Regulators/Policymakers, − The standard provides guidance in setting policy and regulations that will aid in the permitting process for trampoline courts. ASTM F2970 provides clear guidance to regulatory officials when permitting and inspecting trampoline courts from a compliance perspective. •, Designers/Engineers/Manufacturers, − ASTM F2970 provides aid in the design phase and establishes clear guidelines for manufacturers’ responsibilities. •, Owners/Operators, − ASTM F2970 provides guidance on planning, operation, signage and patron education. •, General Public, − The standard establishes clear guidelines for trampoline court foam pits, frame padding, accessibility, patron education and conduct guidelines. “The new standard was developed by a dedicated group of stakeholders including manufacturers, owner/operators, risk managers, regulators and consumer advocates,” says Slaggert. “Every aspect of ASTM F2970 was developed with the end user in mind.” “The…, ASTM Committee F24 Next Meeting:, Oct. 24-25, 2013, Scottsdale, Ariz., Technical Contact:, Philip Slaggert, Slaggert Risk Management, Hobe Sound, Fla., Phone: 561-758-3266; pslaggert@msn.com , ASTM Staff Contact:, Leonard Morrissey, Phone: 610-832-9719; lmorrissey@astm.org , ASTM PR Contact:, Barbara Schindler, Phone: 610-832-9603; bschindl@astm.org Release #9436
-
The headspace in domestic wastewater collection and treatment systems is a severe environment that can impact even high performance protective coatings. A proposed new ASTM International standard covers an apparatus and set of procedures that are used to create and maintain a simulated sewer headspace environment to be used to test potential coatings. ASTM WK33537 , Practice for Operating the…, ASTM Committee G01 Next Meeting:, Nov. 12-14, 2013, November Committee Week, Jacksonville, Fla., Technical Contact:, Vaughn O’Dea, Tnemec Co. Inc., Kansas City, Mo., Phone: 816-519-2267; odea@tnemec.com , ASTM Staff Contact:, Jennifer Rodgers, Phone: 610-832-9694; jrodgers@astm.org , ASTM PR Contact:, Barbara Schindler, Phone: 610-832-9603; bschindl@astm.org Release #9438
-
The growth of parasailing as an amusement activity has led to calls for standardization. A new ASTM subcommittee, F24.65 on Parasailing , will be developing standards for operations, crew proficiency and equipment. F24.65 is under the jurisdiction of ASTM International Committee F24 on Amusement Rides and Devices . Because weather, particularly gusty wind, has been a variable in parasailing…, ASTM Committee F24 Next Meeting:, Oct. 24-26, 2013, Scottsdale, Ariz., Technical Contact:, Larry Meddock, Water Sports Industry Association, Orlando, Fla., Phone: 407-620-7992; info@wsia.net , ASTM Staff Contact:, Leonard Morrissey, Phone: 610-832-9719; lmorrissey@astm.org , ASTM PR Contact:, Barbara Schindler, Phone: 610-832-9603; bschindl@astm.org Release #9379
-
All interested parties are invited to join in the ongoing development of ASTM International standard ASTM D3181 , Guide for Conducting Wear Tests on Textiles. The standard is now under the jurisdiction of Subcommittee D13.60 on Fabric Test Methods, Specific , part of ASTM International Committee D13 on Textiles . ASTM D3181 is used to provide data that will help predict the expected wear…, ASTM Committee D13 Next Meeting:, June 9-12, 2013, June Committee Week, Indianapolis, Ind., Technical Contact:, Norma M. Keyes, Keyes Consulting LLC, Apex, N.C., Phone: 919-362-4044; keyesconsult@att.net, ASTM Staff Contact:, Jennifer Rodgers, Phone: 610-832-9694; jrodgers@astm.org, ASTM PR Contact:, Barbara Schindler, Phone: 610-832-9603; bschindl@astm.org Release #9320
-
Aerial adventure courses such as zip lining, ropes courses, challenge courses, aerial trekking courses and canopy tours are among the fastest growing segments of the commercial recreational industry. These activities include functional, operational and patron participation requirements that are now represented in a new ASTM International standard, ASTM F2959 , Practice for Special Requirements…, ASTM Committee F24 Next Meeting:, Feb. 14-16, 2013, Hyatt French Quarter, New Orleans, La.; Oct. 24-26, 2013, Valley Ho Hotel, Scottsdale, Ariz., Technical Contact:, Mike Teske, Skyline Eco-Adventures, Haliimaile, Hawaii, Phone: 865-323-6643; gt40guy@earthlink.net, ASTM Staff Contact:, Leonard Morrissey, Phone: 610-832-9719; lmorrissey@astm.org, ASTM PR Contact:, Barbara Schindler, Phone: 610-832-9603; bschindl@astm.org Release #9306
-
ASTM International Committee G01 on Corrosion of Metals has an ongoing commitment to help the oil field industries adopt and use state-of-the-art techniques to control corrosion. As part of this commitment, Subcommittee G01.05 on Laboratory Corrosion Tests has approved ASTM G205 , Guide for Determining Corrosivity of Crude Oils. ASTM G205 is the result of collaboration among members of Task Group…, ASTM Committee G01 Next Meeting:, Nov. 13-15, November Committee Week, Atlanta, Ga., Technical Contact:, Sankara Papavinasam, Ph.D., CanmetMATERIALS, Hamilton, Ontario, Canada, Phone: 613-947-4603; spapavin@nrcan.gc.ca, ASTM Staff Contact:, Jennifer Rodgers, Phone: 610-832-9694; jrodgers@astm.org, ASTM PR Contact:, Barbara Schindler, Phone: 610-832-9603; bschindl@astm.org R elease #9297
-
Trampoline parks are one of the fastest growing segments of the attractions industry. In the last year, the popularity of trampoline parks has risen dramatically and new facilities are opening almost weekly. Stakeholders, recognizing this growth, have come together to develop an ASTM standard practice for this unique attraction. At the ASTM Committee F24 on Amusement Rides and Devices ’ global…, Technical Contact:, Philip Slaggert, Amusement Evaluation and Testing, Hobe Sound, Fla., Phone: 561-758-3266; pslaggert@msn.com ASTM Staff Contact: Leonard Morrissey, Phone: 610-832-9719; lmorriss@astm.org ASTM PR Contact: Barbara Schindler, Phone: 610-832-9603; bschindl@astm.org R elease #9192
-
A proposed new ASTM International standard will detail a multilevel approach for performing above- and below-ground inspection of transmission poles and lattice towers in the field. ASTM WK35986, Test Method for Field Inspection of Transmission Poles and Lattice Towers, will be used by utilities to provide tools for maintenance departments that inspect and repair transmission structures. ASTM…
-
Subcommittee D13.21 on Pile Floor Coverings is seeking experts who may be using ASTM D5251 , Practice for the Operation of the Tetrapod Walker Drum Tester. ASTM D5251 describes the equipment and operation of the Tetrapod Walker for testing unused pile floor coverings with a thickness of 20 mm or less. The subcommittee is hoping to gauge the current level of interest in ASTM D5251. D13.21, which…