Search
Advanced search
Filter by category
Filter by committee
Search results
-
As rare earth materials play an increasingly critical role in the growth of global industries, an ASTM International subcommittee is gearing up to address challenges across the life cycle of these vital resources. ASTM Subcommittee F40.04 on Rare Earth Materials held its most recent meeting in April and has established a standards development agenda aimed at supporting efficient and safe…, Stimulating the Worldwide Supply Chain, The increased demand for rare earth materials has converged with supply bottlenecks, resulting in a looming shortage of these resources throughout the worldwide high-tech, energy and automotive sectors. To better ensure that rare earths are more readily available for industry use, public and private sector stakeholders are focusing on ways to diversify supplies. Strategies include improving…, Protecting Our Energy Future, Underscoring the importance of rare earth materials to clean energy growth, the U.S. Department of Energy has established the Critical Materials Institute (CMI) at its Ames Laboratory in Ames, Iowa. The institute will bring together leading experts from academia, national laboratories and the private sector to find solutions to help avoid a rare earth supply shortage. Dr. Alex King, director of…, ASTM Committee F40 Next Meeting:, Nov. 13-14, 2013, November Committee Week, Jacksonville, Fla., Technical Contact:, Taco van der Maten, PANalytical B.V., Almelo, The Netherlands, Phone: +31-546-534-372; taco.van.der.maten@panalytical.com, ASTM Staff Contact:, Alyson Fick, Phone: 610-832-9710; afick@astm.org, ASTM PR Contact:, Barbara Schindler, Phone: 610-832-9603; bschindl@astm.org Release #9406
-
A proposed new ASTM International standard will provide the first comprehensive approach to analyzing oxygen removal cartridges. ASTM WK39806 , Practice for the Capacity of Ion Exchange Oxygen Removal Cartridge, is being developed by Subcommittee D19.08 on Membranes and Ion Exchange Materials , part of ASTM International Committee D19 on Water . ASTM WK39806 will help determine the exchange…, ASTM Committee D19 Next Meeting:, June 2-6, 2013, U.S. Geological Survey Denver Federal Center, Lakewood, Colo., Technical Contact:, G.Taylor Smith, Ionex Technologies Inc., Fall River, Mass., Phone: 508-677-2881; info@ionextechnologies.com , ASTM Staff Contact:, Alyson Fick, Phone: 610-832-9710; afick@astm.org , ASTM PR Contact:, Barbara Schindler, Phone: 610-832-9603; bschindl@astm.org Release #9376
-
Public policy decisions on rare earth materials will have an influence on industry and affect future standardization efforts. Acknowledging this importance, ASTM International Committee F40 on Declarable Substances in Materials has formed a new subcommittee, F40.04 on Rare Earth Materials. The subcommittee, which will promote knowledge, stimulate research and implement technology through the…, ASTM Committee F40 Next Meeting:, Nov. 14-15, 2012, November Committee Week, Atlanta, Ga., Technical Contact:, Taco van der Maten, PANalytical B.V., Almelo, The Netherlands, Phone: +31-546-534-372; taco.van.der.maten@panalytical.com, ASTM Staff Contact:, Alyson Fick, Phone: 832-9710; afick@astm.org, ASTM PR Contact:, Barbara Schindler, Phone: 610-832-9603; bschindl@astm.org R elease #9309
-
The U.S. Nuclear Regulatory Commission requires that operators of nuclear power plants measure the amount of the radionuclide carbon-14 in their gaseous effluents. A proposed new ASTM standard will aid plants (and other facilities at which fission reactions or spent fuel processing takes place) in making these measurements. The proposed standard, ASTM WK36397 , Practice for Sampling of C-14 in…, Technical Contact:, Robert Litman, Radiochemistry Laboratory Basics, The Villages, Fla., Phone: 352-633-8444; drbob20@comcast.net, ASTM Staff Contact:, Alyson Fick, Phone: 610-832-9710; afick@astm.org, ASTM PR Contact:, Barbara Schindler, Phone: 610-832-9603; bschindl@astm.org R elease #9223
-
D19 Standards Used for Measuring Regulated Pollutants in Wastewater Ten standards developed by ASTM International Committee D19 on Water have been included in a final rule published in the Code of Federal Regulations by the U.S. Environmental Protection Agency to approve methods for measuring regulated pollutants in wastewater. Guidelines Establishing Test Procedures for the Analysis of…
-
A new ASTM International standard will be referenced by the International Cyanide Management Code as a guide to ASTM standards related to cyanide management. ASTM D7728 , Guide for Selection of ASTM Analytical Methods for Implementation of International Cyanide Management Code Guidance, was developed by Subcommittee D19.06 on Methods for Analysis for Organic Substances in Water , part of ASTM…
-
Dental dams are rectangular sheets of latex used to isolate specific teeth during dental procedures. Testing laboratories, as well as manufacturers of dental dams, exercise bands, rubber bands and tourniquets will be the primary users of a proposed new ASTM standard on dental dams. ASTM WK28312 , Test Method for Quantitation of Powder on Dental Dams, is currently being developed by Subcommittee…, ASTM Committee D11 Next Meeting:, June 13-16, 2011, June Committee Week, Anaheim, Calif., Technical Contact:, Kelly Horton, LEAP Testing Service, Sayre, Pa., Phone: 570-882-4645; horton_kelly@guthrie.org, ASTM Staff Contact:, Joe Koury, Phone: 610-832-9804; jkoury@astm.org, ASTM PR Contact:, Barbara Schindler, Phone: 610-832-9603; bschindl@astm.org Release #8755
-
Laura Koss of Federal Trade Commission to Provide FTC Perspective, ASTM International Committee D13 on Textiles will sponsor a workshop, The Textile Industry and the Green Challenge: A Federal Trade Commission Perspective, on Tuesday Jan. 31, 2011, from Noon-1:30 p.m. EDT. The workshop will take place during the D13 standards development meetings, which will be held Jan. 30-Feb. 2 at the Baltimore Marriott Waterfront in Baltimore, Md. The workshop will provide a…, ASTM Committee D13 Next Meeting:, Jan. 30-Feb. 2, 2011, January Committee Week, Baltimore, Md., Technical Contact:, Vincent Diaz, Atlantic Thread & Supply Co., Baltimore, Md., Phone: 410-687-9424; vince@atlanticthread.com, ASTM Staff Contact:, Jennifer Rogers, Phone: 610-832-9694; jrodgers@astm.org, ASTM PR Contact:, Barbara Schindler, Phone: 610-832-9603; bschindl@astm.org Release #8756
-
A new ASTM International standard will provide a fast and effective way to test production lots of thermoplastic elastomers in order to quantify and predict how well they process and what ultimate physical properties will be imparted to final molded or extruded products. ASTM D7605 , Test Method for Thermoplastic Elastomers — Measurement of Polymer Melt Rheological Properties and Congealed…
-
A new ASTM International standard will provide the means to quickly detect and quantify the lead concentration in toys and other children's products. The new standard, F2853 , Test Method for Determination of Lead in Paint Layers and Similar Coatings or in Substrates and Homogenous Materials by Energy Dispersive X-Ray Fluorescence Spectrometry Using Multiple Monochromatic Excitation Beams, was…