Search
Advanced search
Filter by category
Filter by committee
Search results
-
Natural gas from unconventional sources such as coal beds has become a common target of exploration. Now, a new ASTM standard is the first to describe a method for determining the gas content of coal from such sources by desorption, using samples obtained by surface drilling. ASTM D7569 , Practice for Determination of Gas Content of Coal - Direct Desorption Method, was developed by Subcommittee…, ASTM Committee D05 Next Meeting:, May 15-18, 2011, May Committee Week, Anaheim, Calif., Technical Contact:, Peter Warwick, U.S. Geological Survey, Reston, Va., Phone: 703-648-6469; pwarwick@usgs.gov, ASTM Staff Contact:, Scott Orthey, Phone: 610-832-9730; sorthey@astm.org, ASTM PR Contact:, Barbara Schindler, Phone: 610-832-9603; bschindl@astm.org Release #8749
-
A new ASTM International standard addresses the most effective ways to manage resources when disaster strikes. The new standard, ASTM E2640 , Guide for Resource Management in Emergency Management and Homeland Security, was developed by Subcommittee E54.02 on Emergency Preparedness, Training and Procedures. The subcommittee is under the jurisdiction of ASTM International Committee E54 on Homeland…, Preparedness, • Planning and procedures; • Resource needs assessment; • Specific resources; • Necessary resource agreements; • Inventory process; • Maintenance of resources; and • Information systems., Operations, • Identifying requirements; • Ordering and acquiring; • Mobilization and coordination; • Command and control; • Receipt, tracking and reporting; • Logistics support planning; • Recovering/Demobilization; and • Financial reimbursement. Now that ASTM E2640 has been approved and published, the subcommittee is developing a proposed new standard, ASTM WK24630 , Guide for…, ASTM Committee E54 Next Meeting:, Jan. 31-Feb. 2, 2011, January Committee Week, Baltimore, Md., Technical Contact:, Robert Stenner, West Richland, Wash., Phone: 509-531-6438; robert.stenner@pnl.gov, ASTM Staff Contact:, Rick Lake, Phone: 610-832-9689; rlake@astm.org, ASTM PR Contact:, Barbara Schindler, Phone: 610-832-9603; bschindl@astm.org Release #8754
-
ASTM International standard ASTM E2541 , Guide for Stakeholder-Focused, Consensus-Based Disaster Restoration Process for Contaminated Assets, serves as an important framework to help public and private organizations and companies plan ahead and prepare for the restoration of their facilities following a catastrophic event. The standard is under the jurisdiction of Subcommittee E54.02 on Emergency…
-
Moisture, volatile matter and ash are three of the primary parameters used for assessing the quality of coal. A new ASTM standard that covers the use of a macro thermogravimetric analyzer for the determination of moisture, volatile matter and ash in analysis samples of coal and coke has recently been approved by ASTM International Committee D05 on Coal and Coke. ASTM D7582 , Test Methods for…, ASTM Committee D05 Next Meeting:, May 16-19, May committee week, St. Louis, Mo., Technical Contact:, John T. Riley, Ph.D., Western Kentucky University, Bowling Green, Ky., Phone: 270-842-2757; brgrileys@insightbb.com, ASTM Staff Contact:, Scott Orthey, Phone: 610-832-9730; sorthey@astm.org, ASTM PR Contact:, Barbara Schindler, Phone: 610-832-9603; bschindl@astm.org Release #8 508/Feb2010
-
While operations centers are key to managing emergency situations, standards specific to developing these centers currently do not exist. However, a proposed new ASTM International standard that will provide advice and existing best business practices for the creation of emergency operations centers is being developed by ASTM Committee E54 ( www.astm.org/COMMIT/E54.htm ) on Homeland Security…, ASTM Committee E54 Next Meeting:, Jan. 25-27, January committee week, San Antonio, Texas, Technical Contact:, Frank Kriz, Indianapolis, Ind., Phone: 602-319-1446; krizassoc@aol.com, ASTM Staff Contact:, Timothy Brooke, Phone: 610-832-9729; tbrooke@astm.org, ASTM PR Contact:, Barbara Schindler, Phone: 610-832-9603; bschindl@astm.org Release #84 59/Jan2010
-
ASTM International Subcommittee E34.50 on Health and Safety Standards for Metalworking Fluids has developed three new standards. Two of the recently approved ASTM standards cover aspects of water-miscible metalworking fluids, while the third concerns prevention of dermatitis in the wet metal removal fluid environment., Prevention of Dermatitis, Dermatitis is an inflammatory response of the skin to a chemical or physical agent. While redness, swelling and itching are typical signs of dermatitis, symptoms can be more severe as well. A new ASTM standard, ASTM E2693 , Practice for Prevention of Dermatitis in the Wet Metal Removal Fluid Environment, discusses dermatitis and its causes and presents a comprehensive approach to dermatitis…, Metalworking Fluids, Two new E34.50 standards address the detection of microbial contamination in metalworking fluids: ASTM E2657 , Test Method for Determination of Endotoxin Concentrations in Water-Miscible Metalworking Fluids, and ASTM E2694 , Test Method for Measurement of Adenosine Triphosphate in Water-Miscible Metalworking Fluids. Both ASTM E2657 and ASTM E2694 measure biological contamination in metalworking…, Participation Invited, The subcommittee is currently looking for participants for an interlaboratory study for ASTM E2657 and ASTM E2694 . “We plan to use a single set of MWF for both standards, so labs who are interested in either or both are welcome to participate,” says Passman. “A few labs will run both the ILS’s for both standards, while most will run one or the other.” Subcommittee E34.50 is part of ASTM…
-
Measuring the reflectance of vitrinite dispersed in sedimentary rocks is one of the most commonly used tools for determining thermal maturity in hydrocarbon exploration, basin modeling and other geological applications. Despite this, there currently is not a consensus standard for making these measurements. ASTM International Committee D05 on Coal and Coke is developing a proposed standard to…
-
Subcommittee D05.21 on Methods of Analysis invites all interested parties to participate in the development of a proposed new standard, WK22936 , Test Method for Determination of Sulfur Forms in Coal by ICP-AES. The subcommittee is part of ASTM International Committee D05 on Coal and Coke. According to Colin Campbell, SaskPower, and D05 member, WK22936 is to be based on D2492 , Test Method for…
-
A new mechanical sampling standard recently approved by ASTM International Committee D05 on Coal and Coke incorporates into one document four other ASTM standards dealing with mechanical samples. The new standard, D7430 , Practice for Mechanical Sampling of Coal, is under the jurisdiction of Subcommittee D05.23 on Sampling. Paul Reagan, president, Sampling Associates International, and a D05…
-
Laboratories that test coal and coke for moisture, volatile matter and ash will benefit from a proposed new standard being developed by ASTM International Committee D05 on Coal and Coke. The new standard, WK19081 , Test Method for Proximate Analysis of Coal and Coke by Macro Thermogravimetric Analysis, is being developed by a task group under the jurisdiction of Subcommittee D05.21 on Methods of…