Search
Advanced search
Filter by category
Filter by committee
Search results
-
ASTM Subcommittee D03.14 on Hydrogen and Fuel Cells is currently developing the last two of a series of standards designed to support quality standards for hydrogen fuel cell vehicles being developed by SAE International (formerly the Society of Automotive Engineers) and the International Organization for Standardization (ISO). The two standards currently under development are ASTM WK34574 , Test…, ASTM Committee D03 Next Meeting:, Dec. 5-7, 2011, in conjunction with D02 December meeting, New Orleans, La., Technical Contact:, Jacquelyn Birdsall, California Fuel Cell Partnership, West Sacramento, Calif., Phone: 916-375-7421; jbirdsall@cafcp.org, ASTM Staff Contact:, Alyson Fick, Phone: 610-832-9710; afick@astm.org, ASTM PR Contact:, Barbara Schindler, Phone: 610-832-9603; bschindl@astm.org R elease #9003
-
The need for a consensus standard targeting the measurement of gaseous hydrocarbons and other components of gaseous streams allowing users to better comply with U.S. Environmental Protection Agency’s greenhouse gas regulation provided the impetus for the development of a proposed new ASTM International standard meeting this need. ASTM WK33788 , Test Method for Determination of Hydrocarbons and…
-
A new ASTM International subcommittee has been created to develop standards that will be meaningful and accurate performance indicators to measure work-related injury and illness performance throughout the world. Subcommittee E34.55 on Occupational Safety and Health Performance Improvement is under the jurisdiction of ASTM International Committee E34 on Occupational Health and Safety. “Measuring…
-
Interlocking concrete pavements are extensively used in low-speed urban and rural roads throughout Europe and are seeing increased use as an alternative to asphalt and cast-in-place concrete in the United States. A proposed new ASTM International standard will address the management by city and county transportation agencies of roads made from interlocking concrete pavements. The proposed new…, ASTM Committee E17 Next Meeting:, June 5-6, 2011, State College, Pa., Technical Contact:, David R. Smith, Interlocking Concrete Pavement Institute, Herndon, Va., Phone: 703-657-6900, ext. 201; dsmith@icpi.org, ASTM Staff Contact:, Daniel Smith, Phone: 610-832-9727; dsmith@astm.org, ASTM PR Contact:, Barbara Schindler, Phone: 610-832-9603; bschindl@astm.org Release #8857
-
ASTM International Committee D03 on Gaseous Fuels recently approved two new standards for the hydrogen fuel industry: ASTM D7650 , Test Method for Sampling of Particulate Matter in High Pressure Hydrogen Used as a Gaseous Fuel with an In-Stream Filter, and ASTM D7651 , Test Method for Gravimetric Measurement of Particulate Concentration of Hydrogen Fuel. Subcommittee D03.14 on Hydrogen and Fuel…
-
Traffic monitoring is a means of counting and classifying vehicles and measuring vehicle flow characteristics, such as vehicle speed, lane occupancy, turning movements and other items typically used to portray traffic movement. In order for traffic monitoring data to be assessed properly, information on how the data were collected, edited, summarized and reported must be provided. This obligation…
-
Since the appearance of the first California-type models around 1940, the profilograph has been a popular device used for quality control in the construction of pavements. Both roadway and airfield landing agencies have adopted roughness indexes computed from profilograph-derived measurements as a level of construction quality. Emerging high-speed inertial profilers can now quickly collect…
-
ASTM International Committee D03 on Gaseous Fuels invites all interested parties to participate in their standards developing activities. Proposed new standards currently being developed by subcommittees within D03 include ASTM WK24874, Test Method for the Determination of Moisture Vapor Concentration in Natural Gas and by Tunable Diode Laser Spectroscopy (TDLAS), and ASTM WK24875 , Practice for…, Tunable Diode Laser Spectroscopy, The proposed new standard, ASTM WK24874 , is being developed at the request of several gas companies that use TDLAS analyzers for the measurement of moisture in natural gas. While TDLAS has become a popular type of gas analysis, no specific standard currently exists for its use. ASTM WK24874 is under the jurisdiction of Subcommittee D03.12 on On-Line/At-Line Analysis of Gaseous Fuels. According…, Siloxanes, While biofuel from landfills and sewage digestion has been used as fuel for local gas turbine engines, it is necessary to hold the content of siloxanes within the fuel down to 50 parts per billion. Siloxanes that can coat the turbine under working conditions are converted to an abrasive silicone dioxide coating that greatly reduces the lifetime of the engine. ASTM WK24875 is currently being…
-
A proposed new standard being developed by ASTM International Committee E17 on Vehicle-Pavement Systems will be the first to describe how truth-in-data should be applied to traffic monitoring data collection, summarization and reporting. WK25280 , Practice for Highway Traffic Monitoring Truth-in-Data, is under the jurisdiction of Subcommittee E17.52 on Traffic Monitoring. Current traffic…
-
ASTM International Subcommittee E34.50 on Health and Safety Standards for Metalworking Fluids has developed three new standards. Two of the recently approved ASTM standards cover aspects of water-miscible metalworking fluids, while the third concerns prevention of dermatitis in the wet metal removal fluid environment., Prevention of Dermatitis, Dermatitis is an inflammatory response of the skin to a chemical or physical agent. While redness, swelling and itching are typical signs of dermatitis, symptoms can be more severe as well. A new ASTM standard, ASTM E2693 , Practice for Prevention of Dermatitis in the Wet Metal Removal Fluid Environment, discusses dermatitis and its causes and presents a comprehensive approach to dermatitis…, Metalworking Fluids, Two new E34.50 standards address the detection of microbial contamination in metalworking fluids: ASTM E2657 , Test Method for Determination of Endotoxin Concentrations in Water-Miscible Metalworking Fluids, and ASTM E2694 , Test Method for Measurement of Adenosine Triphosphate in Water-Miscible Metalworking Fluids. Both ASTM E2657 and ASTM E2694 measure biological contamination in metalworking…, Participation Invited, The subcommittee is currently looking for participants for an interlaboratory study for ASTM E2657 and ASTM E2694 . “We plan to use a single set of MWF for both standards, so labs who are interested in either or both are welcome to participate,” says Passman. “A few labs will run both the ILS’s for both standards, while most will run one or the other.” Subcommittee E34.50 is part of ASTM…