Search
Advanced search
Filter by category
Filter by committee
Search results
-
More than 100 participants attended the meetings of ASTM Subcommittee D02.J on Aviation Fuels held June 3-5, 2008, in Warsaw, Poland. The subcommittee is part of ASTM International Committee D02 on Petroleum Products and Lubricants., Participating in the Warsaw event were representatives from the Air Transport Association (ATA), the International Air Transport Association (IATA) and 10 airlines, as well as a large number of major petroleum refiners, eight original equipment manufacturers and several airworthiness authorities., Recognized and used worldwide, the standards produced by ASTM Subcommittee D02.J include specifications, test methods and practices to help ensure that aviation fuels are fit and remain clean and dry prior to use. The focus of the meeting was aviation turbine fuels and aviation gasoline, with strong interest in the approval of biomass produced fuels, which would help to reduce key greenhouse…
-
REPORT ON THE JUNE 3-5, 2008, MEETING OF ASTM SUBCOMMITTEE D02.J ON AVIATION FUELS IN WARSAW, POLANDThe agenda for the meeting of ASTM Subcommittee D02.J on Aviation Fuels held in June 2008 is geared to the pertinent discussions concerning aviation turbine fuels and aviation gasoline, since there is much interest for the approval of biomass-produced fuels that would help reduce key greenhouse gases such as carbon dioxide (CO 2 ). In addition to these topics, task force meetings were held to…, Section J01 on Jet Fuel Specifications, - The progress made in Section J01 includes but was not limited to: -A description of a generic Fischer-Tropsch derived product known as synthesized paraffinic kerosine (SPK) is being developed for use in blending jet fuel at levels up to 50% (by volume). This will be balloted for inclusion in the jet fuel specification (ASTM D1655 , Standard Specification for Aviation Turbine Fuels) when the…, Section J06 on Emerging Aviation Fuels, -, Section J06 is a new start-up group. Their actions at the meeting were: -Opened with a discussion of the current state of alternative turbine fuels. So far, synthesis gas derived hydrocarbons are the only alternative blend stream approved or nearly approved for use in jet fuel. Their approval resulted from the efforts of SASOL, which developed synthetic jet fuel blend stocks back in the 1990s and…, Section J04 on Additives and Electrical Properties, -, Topics discussed included:, -During the session it was agreed to ballot for membership approval the new Standard Practice Guideline for the Qualification and Approval of New Aviation Turbine Fuels and Fuel Additives, as a replacement for the current words in ASTM D4054 (same title). This guideline provides a framework for the qualification and approval of new fuels, including alternative fuels and new fuel additives for use…
-
Three proposed biodiesel specifications have taken the next step toward final approval as ASTM International consensus standards. The specifications include: -Adding requirements for up to 5 percent biodiesel to existing ASTM D975 , Specification for Diesel Fuel Oils; -Revising the existing ASTM D6751 , Specification for Biodiesel Fuel Blend Stock (B100) for Middle Distillate Fuels, to include a…
-
Considering the effects of meetings on the environment is the purpose of a new activity launched by ASTM International and the Convention Industry Council through its Accepted Practices Exchange (APEX) initiative. Responding to a request from the U.S. Environmental Protection Agency, ASTM and CIC have gathered a variety of stakeholders from government, business and industry in Task Group E06.71.…
-
Subcommittee D02.J on Aviation Fuels, part of ASTM International Committee D02 on Petroleum Products and Lubricants, will meet June 3-5, 2008, at the Hilton Warsaw Hotel and Convention Centre in Warsaw, Poland. Recognized and used worldwide, the standards produced by Subcommittee D02.J include specifications, test methods and practices to help ensure that aviation fuels are fit and remain clean…
-
Interested parties are invited to join in the standards developing activities of Subcommittee E06.21 on Serviceability, part of ASTM International Committee E06 on Performance of Buildings. The subcommittee is currently working on proposed new standards for insulating concrete form systems and intumescent coatings., Insulating Concrete Form Systems, Contractors, design engineers, architects and building officials are welcome to join insulating concrete form manufacturers and raw materials suppliers who are currently working on the proposed new standard WK16256 , Specification for Flat Wall Insulating Concrete Form (ICF) Systems. According to Sheldon Warman, technical director, ECO-Block, LLC, and E06.21 member, WK16256 will provide minimum…, Testing Intumescent Coatings, The fire resistive intumescent materials industry has grown rapidly in the last ten years, but there are currently no standards specific to the product category. A proposed new standard, WK17060 , Test Method for Testing Intumescent Coatings, is the first step in developing a series of standards for the industry. “The fact that the products have a life safety function makes it imperative that…
-
Subcommittee E06.51 on Performance of Windows, Doors, Skylights and Curtain Walls, part of ASTM International Committee E06 on Performance of Buildings, has formed a new task group to address skylights in a proposed standard, WK17797 , Human Impact on Commercial Skylights. The new standard will be used to develop, formulate and improve standard methods of tests that simulate falls of persons onto…
-
Two keystone documents for the Exterior Insulation and Finish Systems industry are now ASTM International standards. E 2568 , Specification for PB Exterior Insulation and Finish Systems, and E 2570 , Test Methods for Evaluating Water-Resistive Barrier (WRB) Coatings Used Under Exterior Insulation and Finish Systems (EIFS) or EIFS with Drainage, were approved as ASTM standards by ASTM…
-
A proposed new test method being developed by ASTM Committee E06 on Performance of Buildings will be used to determine air leakage in air barrier assemblies that are integrated with one another in a building enclosure system construction. Interested parties are invited to participate in the ongoing development of WK14823 , Test Method for Determining Air Leakage of Installed Air Barrier Systems,…
-
Two new ASTM International standards will provide designers of wood burning appliances with a way to gage the effectiveness of technological improvements in their products. The standards, E 2515 , Test Method for Determination of Particulate Matter Emissions Collected by a Dilution Tunnel, and E 2558 , Test Method for Determining Particulate Matter Emissions from Fires in Low Mass Wood-Burning…