Search
Advanced search
Filter by category
Filter by committee
Search results
-
A proposed new ASTM International standard is emerging from research being conducted at the U.S. Bureau of Reclamation to identify and investigate coatings that will prevent the settlement and attachment of erosion-causing invasive species such as zebra and quagga mussels inside water and wastewater pipelines. The proposed standard, ASTM WK45207 , Test Method for Erosion of Coatings by Flowing…, ASTM Committee D01 Next Meeting:, June 22-24, 2014, in conjunction with ASTM International Committee D02 on Petroleum Products, Liquid Fuels and Lubricants meeting, Indianapolis, Ind., Technical Contact:, Daniel Libby, Chase Corp., Westwood, Mass., Phone: 781-332-0782; dlibby@chasecorp.com, ASTM Staff Contact:, Jeffrey Adkins, Phone: 610-832-9738; jadkins@astm.org , ASTM PR Contact:, Barbara Schindler, Phone: 610-832-9603; bschindl@astm.org Release #9645
-
An ASTM subcommittee is developing a proposed standard to test the slip coefficient properties of coatings used in slip-critical bolted connections. The test is based on an appendix in the “Specification for Structural Joints Using High-Strength Bolts,” published by the Research Council on Structural Connections. The proposed ASTM standard will expand on the Research Council standard by…, ASTM Committee D01 Next Meeting:, June 22-24, 2014, Indianapolis, Ind., Technical Contact:, Bill Corbett, KTA-Tator Inc., Pittsburgh, Pa., Phone: 412-788-1300, ext. 223; bcorbett@kta.com , ASTM Staff Contact:, Jeffrey Adkins, Phone: 610-832-9738; jadkins@astm.org , ASTM PR Contact:, Barbara Schindler, Phone: 610-832-9603; bschindl@astm.org Release #9638
-
A proposed new ASTM International standard will be used to cover requirements and test methods for a new type of pipe intended for industrial or oil and gas wastewater transfer. ASTM WK44033 , Specification for Fluid Composite Transfer Pipe and Fittings, is being developed by Subcommittee F17.68 on Energy Piping Systems , part of ASTM International Committee F17 on Plastic Piping Systems . Pipe…, ASTM Committee F17 Next Meeting:, April 7-10, 2014, April Committee Week, Toronto, Ontario, Canada, Technical Contact:, James Goddard, Powell, Ohio, Phone: 740-972-0012; jimgoddard3@gmail.com , ASTM Staff Contact:, Robert Morgan, Phone: 610-832-9732; rmorgan@astm.org, ASTM PR Contact:, Barbara Schindler, Phone: 610-832-9603; bschindl@astm.org Release #9538
-
A new ASTM International standard describes a solvent rub technique that can be used in the laboratory, field or fabrication shop for assessing the solvent resistance of an organic coating that chemically and/or physically changes during the curing process. ASTM D7835 , Test Method for Determining the Solvent Resistance of an Organic Coating Using a Mechanical Rubbing Machine, was developed by…, ASTM Committee D01 Next Meeting:, Jan. 26-28, 2014, January Committee Week, Houston, Texas, Technical Contact:, Ted Best, Valspar Corp., Bowling Green, Ky., Phone: 270-746-6867; tbest@valspar.com , ASTM Staff Contact:, Jeff Adkins, Phone: 610-832-9738; jadkins@astm.org , ASTM PR Contact:, Barbara Schindler, Phone: 610-832-9603; bschindl@astm.org Release #9447
-
A new ASTM International standard will be used to substantiate manufacturers’ claims on the inherent dry fall characteristics of coating materials such as paint. ASTM D7868 , Practice for Determining the Dry Fall (Fog) Properties of Protective Coatings, was developed by Subcommittee D01.46 on Industrial Protective Coatings , part of ASTM International Committee D01 on Paint and Related Coatings,…, ASTM Committee D01 Next Meeting:, Jan. 26-28, 2014, January Committee Week, Houston, Texas, Technical Contact:, Bill Corbett, KTA-Tator Inc., Pittsburgh, Pa., Phone: 412-412-1300 ext. 223; bcorbett@kta.com , ASTM Staff Contact:, Jeffrey Adkins, Phone: 610-832-9738; jadkins@astm.org , ASTM PR Contact:, Barbara Schindler, Phone: 610-832-9603; bschindl@astm.org Release #9449
-
ASTM Fence Committee Approves New Standards on Ornamental Aluminum Fencing and Polymer Privacy SlatsASTM International Committee F14 on Fences has recently approved two new standards: ASTM F2957 , Specification for Ornamental Aluminum Fence Systems; and ASTM F3000/F3000M , Specification for Polymer Privacy Insert Slats for Chain Link Fabric and Privacy Chain Link Fabric Manufactured Containing Pre-Installed Privacy Slats., Ornamental Aluminum Fence Systems, ASTM F2957 was developed by Subcommittee F14.35 on Architectural Metal Fence Systems. The new standard defines minimum selection criteria and test procedures to ensure product users that an ornamental aluminum fence system has sufficient strength to withstand reasonable loads and forces, and has the appropriate combination of material and organic coating surface protection to withstand effects of…, Polymer Privacy Insert Slats, ASTM F3000/F3000M is under the jurisdiction of Subcommittee F14.40 on Chain Link Fence and Wire Accessories . ASTM F3000/F3000M covers both inserted slats that are placed into chain link fabric after the fence has been installed as well as slats that are pre-inserted into chain link mesh during the link weaving process. According to William Ullrich, principal, Link Consulting LLC, and an F14…, ASTM Committee F14 Next Meeting:, June 25, 2013, ASTM International Headquarters, West Conshohocken, Pa., Technical Contact:, (ASTM F2957) Larry Burkholder, Digger Specialties Inc., Bremen, Ind., Phone: 574-546-5999; lburkholder@diggerspecialties.com; (ASTM F3000/F3000M) William Ullrich, Link Consulting LLC, Annapolis, Md., Phone: 410-849-2610; bullrich.link@comcast.net , ASTM Staff Contact:, Thomas O’Toole, Phone: 610-832-9739; totoole@astm.org , ASTM PR Contact:, Barbara Schindler, Phone: 610-832-9603; bschindl@astm.org Release #9375
-
A proposed new ASTM International standard will offer guidelines for selecting wood substrates for the evaluation of the weathering performance of architectural coatings, such as exterior paints, primers and deck finishes. The proposed standard, ASTM WK32654 , Practice for Selecting Wood Substrates for Weathering Evaluations of Architectural Coatings, is being developed by Subcommittee D01.42 on…, ASTM Committee D01 Next Meeting:, June 23-25, 2013, in conjunction with D02 June meeting, Montreal, Quebec, Canada, Technical Contact:, Marek Gnatowski, Ph.D., Polymer Engineering Co. Ltd., Burnaby, British Columbia, Canada, Phone: 604-298-7633; pecltd@telus.net , ASTM Staff Contact:, Jeff Adkins, Phone: 610-832-9738; jadkins@astm.org, ASTM PR Contact:, Barbara Schindler, Phone: 610-832-9603; bschindl@astm.org Release #9363
-
ASTM International Committee F17 on Plastic Piping Systems is currently developing a proposed standard that will address the use of crosslinked polyethylene (PEX) tubing used in hydronic heating/cooling systems. The proposed new standard, ASTM WK38788 , Specification for Crosslinked Polyethylene (PEX) OD Controlled Tubing for Hydronic Heating/Cooling Systems, is under the jurisdiction of…, ASTM Committee F17 Next Meeting:, Nov. 11-14, 2013, November Committee Week, Jacksonville, Fla., Technical Contact:, Gary Morgan, Viega LLC, Wichita, Kan., Phone: 620-480-1222; garymorgan@viega.com , ASTM Staff Contact:, Robert Morgan, Phone: 610-832-9732; rmorgan@astm.org , ASTM PR Contact:, Barbara Schindler, Phone: 610-832-9603; bschindl@astm.org Release #9361
-
A proposed new ASTM International standard will be used by companies that manufacture complexly shaped pressure pipe components. ASTM WK38747 , Specification for Cylindrical Billets Made from Stress-Rated High-Density Polyethylene (HDPE) by Accumulation Winding of Molten Extruded Material Over a Mandrel, is currently being developed by Subcommittee F17.26 on Olefin Based Pipe , part of ASTM…, ASTM Committee F17 Next Meeting:, April 15-17, 2013, April Committee Week, Indianapolis, Ind., Technical Contact:, Bryan Hauger, Microbac Laboratories Inc., Boulder, Colo., Phone: 720-406-4661; bryan.hauger@microbac.com , ASTM Staff Contact:, Robert Morgan, Phone: 610-832-9732; rmorgan@astm.org , ASTM PR Contact:, Barbara Schindler, Phone: 610-832-9603; bschindl@astm.org Release #9337
-
Heap leaching, a process of removing metal from ore, is more efficiently accomplished when air is introduced to the ore pile. A new ASTM International standard describes how corrugated polyethylene pipes and fittings can be more effectively used to facilitate the aeration process. ASTM F2987 , Specification for Corrugated Polyethylene Pipe and Fittings for Mine Heap Leach Aeration Applications…, ASTM Committee F17 Next Meeting:, April 15-18, 2013, April Committee Week, Indianapolis, Ind., Technical Contact:, James B. Goddard, Powell Ohio, Phone: 740-881-5958; jimgoddard3@gmail.com, ASTM Staff Contact:, Robert Morgan, Phone: 610-832-9732; rmorgan@astm.org, ASTM PR Contact:, Barbara Schindler, Phone: 610-832-9603; bschindl@astm.org Release #9316