Search
Advanced search
Filter by category
Filter by committee
Search results
-
A proposed new ASTM International standard for liquid threats on protective clothing will cover the specific needs of law enforcement officers. The new standard, ASTM WK25965 , Test Method for Liquid Threat Sprayed on a Mannequin, is being developed by Subcommittee F23.30 on Chemicals, part of ASTM International Committee F23 on Personal Protective Clothing and Equipment. Fire and hazardous…
-
The ability to provide the correct amount of protection is one of the important elements in the development of protective clothing worn by individuals who apply pesticides as part of their jobs. While overprotection in hot climatic conditions can result in heat stress and low compliance, some of the existing design-based requirements can result in too little protection, as material performance…, CONTACT:, ASTM Committee F23 Next Meeting:, Jan. 26-28, 2010, January committee week, San Antonio, Texas, Technical Contact:, Anugrah Shaw, University of Maryland Eastern Shore, Princess Anne, Md., Phone: 410-651-6064; ashaw@umes.edu, ASTM Staff Contact:, Stephen Mawn, ASTM International, Phone: 610-832-9726; smawn@astm.org, ASTM PR Contact:, Barbara Schindler, ASTM International, Phone: 610-832-9603; bschindl@astm.org Release #84 54/Jan2010
-
Workers in oil refineries, chemical plants, the natural gas industry and other industries that involve flammable or explosive materials need access to rain gear that is also flame resistant. A new ASTM International standard, ASTM F2733 , Specification for Flame Resistant Rainwear for Protection Against Flame Hazards, provides minimum requirements for flame resistant rainwear to be used by…
-
ASTM International Committee D01 on Paint and Related Coatings, Materials and Applications, has approved two new standards that cover architectural coating touch-up properties and ink stainblocking of paint systems. Both new standards are under the jurisdiction of Subcommittee D01.42 on Architectural Coatings., Touch-Up Properties, When a home is being constructed, paints are subjected to a wide variety of drying conditions, which can lead to differences in appearance between the original coat and subsequent touch-up areas after the paint has fully cured. A new standard, ASTM D7489 , Practice for Evaluating Touch-Up Properties of Architectural Coatings Under Various Environmental Conditions, covers variations in color,…, Ink Stainblocking, Paint companies and raw material suppliers will be able to use a new ASTM standard to assess the capability of architectural coatings for blocking ink stains from bleeding through to a topcoat. The standard, ASTM D7514 , Test Method for Evaluating Ink Stainblocking of Architectural Paint Systems by Visual Assessment, represents a compilation and synthesis of methods that are currently being used…
-
In the field of personal protective clothing, a temperature rating indicates the lowest acceptable air temperature at which an average person would be comfortable when wearing a certain set of clothing. While manufacturers believe that providing temperature ratings is helpful to consumers when they are comparing garments, there have been different methods of testing for a temperature rating. The…
-
Traffic paint plays an important role in maintaining the safety of roads. Subcommittee D01.44 on Traffic Coatings, part of ASTM International Committee D01 on Paint and Related Coatings, Materials and Applications, is currently working on two proposed new standards covering the sampling of waterborne traffic paint and glass bead gradation measurement., WATERBORNE TRAFFIC PAINT, Ensuring that traffic paint taken from the field is tested properly in laboratories is a concern of paint suppliers as well as private testing laboratories, Department of Transportation labs, DOT striping crews and striping contractors. A proposed new ASTM standard, ASTM WK22312 , Practice for Drum and Tote Sampling of Waterborne Traffic Paint, addresses laboratory sampling issues. According to…, GRADATION OF GLASS BEADS, Glass beads added to traffic paint during manufacturing are necessary to ensure paint retroreflectivity, especially at night. A proposed new standard, ASTM WK23758 , Test Method for Measuring Gradation of Glass Beads Using a Flowing Stream Digital Image Analyzer, will be useful in the production and quality control of glass beads. “Digital camera technology combined with high speed computers has…
-
More effective quality testing of the synthetic, hollow filaments that are often used in the manufacture of lower cost paintbrushes is the purpose of a new standard approved by ASTM International Committee D01 on Paint and Related Coatings, Materials and Applications. The new standard, ASTM D7233 , Test Method for Testing Fracture of Level Paintbrush Filaments, was developed by Subcommittee D01.…
-
The wettability of a particular solid coating, substrate or pigment on a surface is a key to its effectiveness, as wetting is important to adhesion as well as to the prevention of surface defects such as craters, dewetting and crawling. A new ASTM International standard uses contact angle measurements to determine the wettability of coatings. The new standard, D7490 , Test Method for Measurement…
-
By necessity, paint used for roadway applications needs to dry quickly. Some multi-component traffic paints cure in less than 10 minutes, some much faster. Because of this speed of curing, these traffic paints and other types of fast-cure (less than 10 minutes) multi-component paints cannot be tested for volatile content using procedures outlined in the ASTM International standard typically used…
-
New ASTM Committee E58 to Develop Standards That Support Engineering Investigations and Assist the Court, ASTM International, one of the largest voluntary standards development organizations (SDO) in the world, today announced the formation of ASTM Committee E58 on Forensic Engineering . Committee E58 will develop standards that promote awareness of the scientific, engineering, ethical and legal considerations inherent in forensic engineering investigations, reporting and testimony., Bringing Engineering Reason to the Dispute Resolution Process, Forensic engineering focuses on the investigation of alleged defects in materials, products, structures and components. These cases are litigated on the premise that the defects cause personal injury or damage to property. Forensic engineering investigations may help determine the causes of these events and assist the disputing parties or the court in resolving the case. Today, forensic…, Assisting the Court through Consensus Standards, ASTM Committee E58 comes together to create important standards and guides that will support the judicial process by facilitating an improved understanding of forensic engineering practices and associated technical issues. This will better enable the court to resolve disputes in a more well-informed and efficient manner, relying on deeper knowledge of the technical data presented and the sound…, E58 Standards: Guiding Forensic Engineering Practice, E58 standards will help guide forensic engineers in conducting investigations in a robust manner while protecting overall public safety. The initial scope of Committee E58 activities will be driven by subcommittees on Product Defect Incidents, Vehicular Incidents, Electrical Incidents and Industrial Processes. ASTM Committee E58 will build upon the body of work of former subcommittee E30.05 on…, Foundation Standard for the Forensic Engineering Profession, Other E58 standards will bolster the role of forensic engineering professionals in the eyes of the court and other users of these services. Consistent with this objective, Committee E58 has recently drafted a general practice document for the forensic engineering profession, titled Standard Guide for the Practice of Forensic Engineering. The goal of this standard is to further educate the court…