Search
Advanced search
Filter by category
Filter by committee
Search results
-
Pigment manufacturers use the loss on ignition test to determine water of hydration or crystallized water. While loss on ignition is a frequently used test, its methodology is embedded within other standards and varies from one to another. Now, a proposed new standard, ASTM WK46877, Test Method for Pigment Loss on Ignition, will provide definitive instructions for conducting this common test. “…, ASTM Committee D01 Next Meeting:, Jan. 25-27, 2015, January Committee Week, New Orleans, La., Technical Contact:, Steven Brunner, WPC Technologies, Milwaukee, Wis., Phone: 414-225-2415; sbrunner@wpctech.com, ASTM Staff Contact:, Jeffrey Adkins, Phone: 610-832-9738; jadkins@astm.org, ASTM PR Contact:, Barbara Schindler, Phone: 610-832-9603; bschindl@astm.org Release #9682
-
A proposed ASTM specification will fill a need for a standard ensuring that protective helmets, particularly those used in law enforcement, are tested consistently. Once approved, ASTM WK46152, Specification for Ballistic-Resistant Head Protection for Law Enforcement Applications, will provide law enforcement and other public safety agencies with a means of establishing minimum performance…, ASTM Committee E54 Next Meeting:, Jan. 26-28, 2015, January Committee Week, New Orleans, La., Technical Contact:, John Cronin, HP White Laboratory Inc., Cortland, N.Y., Phone: 603-933-3768; john.cronin@hpwhite.com, ASTM Staff Contact:, Rick Lake, Phone: 610-832-9689; rlake@astm.org, ASTM PR Contact:, Barbara Schindler, Phone: 610-832-9603; bschindl@astm.org Release #9633
-
A proposed new ASTM International standard is emerging from research being conducted at the U.S. Bureau of Reclamation to identify and investigate coatings that will prevent the settlement and attachment of erosion-causing invasive species such as zebra and quagga mussels inside water and wastewater pipelines. The proposed standard, ASTM WK45207 , Test Method for Erosion of Coatings by Flowing…, ASTM Committee D01 Next Meeting:, June 22-24, 2014, in conjunction with ASTM International Committee D02 on Petroleum Products, Liquid Fuels and Lubricants meeting, Indianapolis, Ind., Technical Contact:, Daniel Libby, Chase Corp., Westwood, Mass., Phone: 781-332-0782; dlibby@chasecorp.com, ASTM Staff Contact:, Jeffrey Adkins, Phone: 610-832-9738; jadkins@astm.org , ASTM PR Contact:, Barbara Schindler, Phone: 610-832-9603; bschindl@astm.org Release #9645
-
Ballistic-resistant shields are essential to the safety of law enforcement officers, especially during active shooter incidents. A proposed new ASTM International standard, ASTM WK45341 , Test Method for Ballistic Resistant Shields, will be used to establish minimum performance requirements for this life-saving equipment. ASTM WK45341 falls under the jurisdiction of Subcommittee E54.04 on…, ASTM Committee E54 Next Meeting:, May 28-30, 2014, National Institute of Standards and Technology, Gaithersburg, Md., Technical Contact:, David Otterson, Ph.D., National Law Enforcement and Corrections Technology Center, Gaithersburg, Md., Phone: 301-240-6754; david.m.otterson@lmco.com , ASTM Staff Contact:, Rick Lake, 610-832-9689; rlake@astm.org, ASTM PR Contact:, Barbara Schindler, Phone: 610-832-9603; bschindl@astm.org Release #9643
-
An ASTM subcommittee is developing a proposed standard to test the slip coefficient properties of coatings used in slip-critical bolted connections. The test is based on an appendix in the “Specification for Structural Joints Using High-Strength Bolts,” published by the Research Council on Structural Connections. The proposed ASTM standard will expand on the Research Council standard by…, ASTM Committee D01 Next Meeting:, June 22-24, 2014, Indianapolis, Ind., Technical Contact:, Bill Corbett, KTA-Tator Inc., Pittsburgh, Pa., Phone: 412-788-1300, ext. 223; bcorbett@kta.com , ASTM Staff Contact:, Jeffrey Adkins, Phone: 610-832-9738; jadkins@astm.org , ASTM PR Contact:, Barbara Schindler, Phone: 610-832-9603; bschindl@astm.org Release #9638
-
ASTM International Committee F38 on Unmanned Aircraft Systems has approved seven new standards that cover all major facets of small unmanned aircraft systems operations, including design, construction, operation and maintenance requirements. The seven new ASTM standards, written for all sUAS that are permitted to operate over a defined area and in airspace defined by a nation’s governing aviation…, ASTM F2908, Specification for Aircraft Flight Manual (AFM) for a Small Unmanned Aircraft System (sUAS), − ASTM F2908 defines minimum requirements for the aircraft flight manual, which provides guidance to owners, mechanics, pilots, crew members, airports, regulatory officials and aircraft and component manufacturers who perform or provide oversight of sUAS flight operations. •, ASTM F2909, Practice for Maintenance and Continued Airworthiness of Small Unmanned Aircraft Systems (sUAS), − ASTM F2909 establishes a practice for the maintenance and continued airworthiness of sUAS. Requirements for continued airworthiness, inspections, maintenance and repairs/alterations are included. •, ASTM F2910, Specification for Design and Construction of a Small Unmanned Aircraft System (sUAS), − ASTM F2910 defines the design, construction and test requirements for sUAS. In addition to general requirements, ASTM F2910 covers requirements for structure, propulsion, propellers, fuel and oil systems, cooling, documentation and other key areas. •, ASTM F2911, Practice for Production Acceptance of Small Unmanned Aircraft System (sUAS), − ASTM F2911 defines production acceptance requirements for sUAS. Requirements covered include several aspects of production, system level production acceptance, quality assurance and documentation. •, ASTM F3002, Specification for Design of the Command and Control System for Small Unmanned Aircraft Systems (sUAS), − ASTM F3002 provides a consensus standard in support of an application to a nation’s governing aviation authority to operate an sUAS for commercial or public use. The standard focuses on command and control (C2) links, including a diagram of a C2 system and general requirements for C2 system components. •, ASTM F3003, Specification for Quality Assurance of a Small Unmanned Aircraft System (sUAS), − ASTM F3003 defines quality assurance requirements for design, manufacture and production of small unmanned aircraft systems. Guidance is given to sUAS manufacturers for the development of a quality assurance program. •, ASTM F3005, Specification for Batteries for Use in Small Unmanned Aircraft Systems (sUAS), − ASTM F3005 defines requirements for battery cells used in sUAS. Mechanical design and safety, and electrical design battery maintenance are primary battery-related areas that are covered. “The introduction of these standards developed by F38 will help to provide a safe and appropriate path for near-term routine sUAS operations in airspace systems of the United States and other countries,” says…, Technical Contact:, Theodore J. Wierzbanowski, Phone: 626-429-8864; wierzbanowski@uasinthenas.com, ASTM Staff Contact:, Stephen Mawn, Phone: 610-832-9726; smawn@astm.org , ASTM PR Contact:, Barbara Schindler, Phone: 610-832-9603; bschindl@astm.org Release #9636
-
Specifications Present Baseline Requirements for Handheld and Stationary Point Chemical Vapor Detectors, Two new ASTM International specifications are the first standards to present baseline performance requirements for point chemical vapor detectors. The standards were developed as the result of a need recognized by the U.S. Department of Homeland Security for chemical, biological, radiological, nuclear and explosives detection capability, as well as the need to set standards so that manufacturers…, ASTM Committee E54 Next Meeting:, Jan. 27-29, 2014, January Committee Week, Houston, Texas, Technical Contact:, Pamela Chu, Ph.D., National Institute for Standards and Technology, Gaithersburg, Md., Phone: 301-975-2988; pamela.chu@nist.gov , ASTM Staff Contact:, Rick Lake, Phone: 610-832-9689; rlake@astm.org , ASTM PR Contact:, Barbara Schindler, Phone: 610-832-9603; bschindl@astm.org Release #9499
-
A new ASTM International standard describes a solvent rub technique that can be used in the laboratory, field or fabrication shop for assessing the solvent resistance of an organic coating that chemically and/or physically changes during the curing process. ASTM D7835 , Test Method for Determining the Solvent Resistance of an Organic Coating Using a Mechanical Rubbing Machine, was developed by…, ASTM Committee D01 Next Meeting:, Jan. 26-28, 2014, January Committee Week, Houston, Texas, Technical Contact:, Ted Best, Valspar Corp., Bowling Green, Ky., Phone: 270-746-6867; tbest@valspar.com , ASTM Staff Contact:, Jeff Adkins, Phone: 610-832-9738; jadkins@astm.org , ASTM PR Contact:, Barbara Schindler, Phone: 610-832-9603; bschindl@astm.org Release #9447
-
A new ASTM International standard will be used to substantiate manufacturers’ claims on the inherent dry fall characteristics of coating materials such as paint. ASTM D7868 , Practice for Determining the Dry Fall (Fog) Properties of Protective Coatings, was developed by Subcommittee D01.46 on Industrial Protective Coatings , part of ASTM International Committee D01 on Paint and Related Coatings,…, ASTM Committee D01 Next Meeting:, Jan. 26-28, 2014, January Committee Week, Houston, Texas, Technical Contact:, Bill Corbett, KTA-Tator Inc., Pittsburgh, Pa., Phone: 412-412-1300 ext. 223; bcorbett@kta.com , ASTM Staff Contact:, Jeffrey Adkins, Phone: 610-832-9738; jadkins@astm.org , ASTM PR Contact:, Barbara Schindler, Phone: 610-832-9603; bschindl@astm.org Release #9449
-
ASTM International is launching an initiative to develop a suite of standards for body armor worn by military and criminal justice personnel. This effort is being supported by the National Institute of Justice, the U.S. Army Program Executive Office – Soldier and the National Institute of Standards and Technology, who are working together to harmonize existing ASTM body armor standards,…, ASTM Committee E54 Next Meeting, : Jan. 27-29, 2014, January Committee Week, Houston, Texas, Technical Contact:, Cassy Robinson, NIST Standards Coordination Office, Gaithersburg, Md., Phone: 301-975-2546; casandra.robinson@nist.gov , ASTM Staff Contact:, Rick Lake, Phone: 610-832-9689; rlake@astm.org , ASTM PR Contact:, Barbara Schindler, Phone: 610-832-9603; bschindl@astm.org Release #9437