Search
Advanced search
Filter by category
Filter by committee
Search results
-
Traffic paint plays an important role in maintaining the safety of roads. Subcommittee D01.44 on Traffic Coatings, part of ASTM International Committee D01 on Paint and Related Coatings, Materials and Applications, is currently working on two proposed new standards covering the sampling of waterborne traffic paint and glass bead gradation measurement., WATERBORNE TRAFFIC PAINT, Ensuring that traffic paint taken from the field is tested properly in laboratories is a concern of paint suppliers as well as private testing laboratories, Department of Transportation labs, DOT striping crews and striping contractors. A proposed new ASTM standard, ASTM WK22312 , Practice for Drum and Tote Sampling of Waterborne Traffic Paint, addresses laboratory sampling issues. According to…, GRADATION OF GLASS BEADS, Glass beads added to traffic paint during manufacturing are necessary to ensure paint retroreflectivity, especially at night. A proposed new standard, ASTM WK23758 , Test Method for Measuring Gradation of Glass Beads Using a Flowing Stream Digital Image Analyzer, will be useful in the production and quality control of glass beads. “Digital camera technology combined with high speed computers has…
-
More effective quality testing of the synthetic, hollow filaments that are often used in the manufacture of lower cost paintbrushes is the purpose of a new standard approved by ASTM International Committee D01 on Paint and Related Coatings, Materials and Applications. The new standard, ASTM D7233 , Test Method for Testing Fracture of Level Paintbrush Filaments, was developed by Subcommittee D01.…
-
The wettability of a particular solid coating, substrate or pigment on a surface is a key to its effectiveness, as wetting is important to adhesion as well as to the prevention of surface defects such as craters, dewetting and crawling. A new ASTM International standard uses contact angle measurements to determine the wettability of coatings. The new standard, D7490 , Test Method for Measurement…
-
By necessity, paint used for roadway applications needs to dry quickly. Some multi-component traffic paints cure in less than 10 minutes, some much faster. Because of this speed of curing, these traffic paints and other types of fast-cure (less than 10 minutes) multi-component paints cannot be tested for volatile content using procedures outlined in the ASTM International standard typically used…
-
New ASTM Committee E58 to Develop Standards That Support Engineering Investigations and Assist the Court, ASTM International, one of the largest voluntary standards development organizations (SDO) in the world, today announced the formation of ASTM Committee E58 on Forensic Engineering . Committee E58 will develop standards that promote awareness of the scientific, engineering, ethical and legal considerations inherent in forensic engineering investigations, reporting and testimony., Bringing Engineering Reason to the Dispute Resolution Process, Forensic engineering focuses on the investigation of alleged defects in materials, products, structures and components. These cases are litigated on the premise that the defects cause personal injury or damage to property. Forensic engineering investigations may help determine the causes of these events and assist the disputing parties or the court in resolving the case. Today, forensic…, Assisting the Court through Consensus Standards, ASTM Committee E58 comes together to create important standards and guides that will support the judicial process by facilitating an improved understanding of forensic engineering practices and associated technical issues. This will better enable the court to resolve disputes in a more well-informed and efficient manner, relying on deeper knowledge of the technical data presented and the sound…, E58 Standards: Guiding Forensic Engineering Practice, E58 standards will help guide forensic engineers in conducting investigations in a robust manner while protecting overall public safety. The initial scope of Committee E58 activities will be driven by subcommittees on Product Defect Incidents, Vehicular Incidents, Electrical Incidents and Industrial Processes. ASTM Committee E58 will build upon the body of work of former subcommittee E30.05 on…, Foundation Standard for the Forensic Engineering Profession, Other E58 standards will bolster the role of forensic engineering professionals in the eyes of the court and other users of these services. Consistent with this objective, Committee E58 has recently drafted a general practice document for the forensic engineering profession, titled Standard Guide for the Practice of Forensic Engineering. The goal of this standard is to further educate the court…
-
Honeycomb ceramics, porous with linear hollow channels, are being used worldwide in automotive catalytic converters and as diesel particulate filters for trucks. Flexural testing of this type of ceramics is addressed in a new ASTM International standard, ASTM C1674 , Test Method for Flexural Strength of Advanced Ceramics with Engineered Porosity (Honeycomb Cellular Channels) at Ambient…
-
Two new standards demonstrate the broad range of practices and test methods currently being developed by ASTM International Committee D01 on Paint and Related Coatings, Materials and Applications. The new ASTM standards will be used in the realms of color reproduction and contact angle measurement. Achieving Consistent Color Reproduction Developed by Subcommittee D01.56 on Printing Inks, ASTM…
-
New Advanced Ceramics Standards from ASTM Cover Fracture Mirror Size Analysis, Tensile Strength DataSubcommittee C28.01 on Mechanical Properties and Performance, part of ASTM International Committee C28 on Advanced Ceramics, has recently approved two new standards, ASTM C1678 , Practice for Fractographic Analysis of Fracture Mirror Sizes in Ceramics and Glasses, and ASTM C1683 , Practice for Size Scaling of Tensile Strengths Using Weibull Statistics for Advanced Ceramics., ASTM C1678 —Bringing Consistency to Fracture Mirror Size Analysis, Fracture mirror size analysis is a powerful quantitative tool for the interpretation of broken ceramic and glass articles. While this type of analysis can be used to determine the stress in a part at the instant of fracture, inspection and interpretation procedures have often varied, resulting in uncertainty in stress estimates. ASTM C1678, Practice for Fractographic Analysis of Fracture Mirror…, ASTM C1683 —Scaling Strength Values, ASTM C1683, Practice for Size Scaling of Tensile Strength Using Weibull Statistics for Advanced Ceramics, provides methodology to convert fracture strength parameters estimated from data obtained with one test geometry to strength parameters representing other test geometries. Stephen Duffy, chair of civil engineering, Cleveland State University, and C28 member, says that companies producing…
-
ASTM Committee D01 on Paint and Related Coatings, Materials and Applications will present a technical seminar, “New Solvents and Formulating Techniques for Low VOC and HAP Paints,” on Sunday, June 15, 2008, from 4 to 6 p.m., at the Hyatt Regency Hotel in Vancouver, British Columbia, Canada. The seminar will be held in conjunction with the D01 committee meeting to be held June 15-18 in Vancouver…
-
Finding a way to accurately measure the water and volatile content of high baked phenolic coatings has led to the development of a new ASTM International standard, D 7245 , Test Method for Measuring Total Water and Volatiles in Liquid Coatings Which Produce Cure Water Upon Heating. The new standard was developed by Subcommittee D01.21 on Chemical Analysis of Paints and Paint Materials, part of…