Search
Advanced search
Filter by category
Filter by committee
Search results
-
ASTM is launching a new subcommittee that will develop test methods and specifications for coatings and linings used in hydroelectric power plants. The new group is part of the Committee on Protective Coatings and Lining Work for Power Generation Facilities ( D33 ). Subcommittee D33.13 on Protective Coatings and Linings for Hydroelectric Power Generation Facilities will address abrasion,…, ASTM Committee D33 on Protective Coatings and Lining Work for Power Generation Facilities Next Meeting:, July 20–21, 2016, West Conshohocken, Pa., Media Inquiries:, Dan Bergels, tel +1.610.832.9602; dbergels@astm.org, Technical Contact:, Allen Skaja, U.S. Bureau of Reclamation, Lakewood, Colo., tel +1.303.445.2396; askaja@usbr.gov, ASTM Staff Contact:, Joe Hugo, tel +1.610.832.9740; jhugo@astm.org Release #10113
-
A new ASTM International test method will help determine the hydraulic capacity of treatment devices that filter stormwater runoff before it reaches bodies of water. “This standard will help engineers create ensure that treatment devices that are the right sizehave adequate capacity to treat flows of expected stormwater runoff flow rates,” says ASTM member Dr. Peter Weiss, a professor in the…, Media Inquiries:, Dan Bergels, tel +1.610.832.9602; dbergels@astm.org, Technical Contact:, Peter Weiss, tel +1.219.464.5220; peter.weiss@valpo.edu, ASTM Staff Contact:, Joseph Hugo, tel +1.610.832.9740; jhugo@astm.org Release #10062
-
A new ASTM International standard ( F2697 , Test Methods for Physical Assault on Overhead Horizontal Fixed Barriers for Detention and Correctional Facilities) will help ensure that the ceilings of rooms in correctional facilities can withstand breakthrough attempts. The standard aims to promote the safety and security of facility staff, facility residents and the general public. This is the…, Technical Contact:, James A. Stapleton Jr., P.E., Habersham Metal Products Co., tel +1.706.778.2212, ext. 202; jas@habershammetal.com, ASTM Staff Contact:, Joseph Hugo, tel +1.610.832.9740; jhugo@astm.org, ASTM PR Contact:, Nathan Osburn, tel +1.610.832.9603; nosburn@astm.org Release #9770
-
Fiber-reinforced polymers are used to strengthen concrete, wood and steel structures above and below ground as well as under water. Two proposed new ASTM International standards will provide an approach to quality control inspection and reporting for fiber-reinforced polymers in all industries. The proposed new standards are: ASTM WK46050, Guide for the Inspection of Bond Critical FRP…, Next Committee D33 Meeting:, Jan. 15-16, 2015, in conjunction with Electric Power Research Institute/Nuclear Utility Coatings Council meetings, Orlando, Fla., Technical Contact:, Ramon Pelaez, Greenman Pedersen Inc., Southbridge, Mass., Phone: 508-612-5769; rpelaez@gpinet.com, ASTM Staff Contact:, Joseph Hugo, Phone: 610-832-9740; jhugo@astm.org, ASTM PR Contact:, Barbara Schindler, Phone: 610-832-9603; bschindl@astm.org Release #9624
-
ASTM International Committee F38 on Unmanned Aircraft Systems has approved seven new standards that cover all major facets of small unmanned aircraft systems operations, including design, construction, operation and maintenance requirements. The seven new ASTM standards, written for all sUAS that are permitted to operate over a defined area and in airspace defined by a nation’s governing aviation…, ASTM F2908, Specification for Aircraft Flight Manual (AFM) for a Small Unmanned Aircraft System (sUAS), − ASTM F2908 defines minimum requirements for the aircraft flight manual, which provides guidance to owners, mechanics, pilots, crew members, airports, regulatory officials and aircraft and component manufacturers who perform or provide oversight of sUAS flight operations. •, ASTM F2909, Practice for Maintenance and Continued Airworthiness of Small Unmanned Aircraft Systems (sUAS), − ASTM F2909 establishes a practice for the maintenance and continued airworthiness of sUAS. Requirements for continued airworthiness, inspections, maintenance and repairs/alterations are included. •, ASTM F2910, Specification for Design and Construction of a Small Unmanned Aircraft System (sUAS), − ASTM F2910 defines the design, construction and test requirements for sUAS. In addition to general requirements, ASTM F2910 covers requirements for structure, propulsion, propellers, fuel and oil systems, cooling, documentation and other key areas. •, ASTM F2911, Practice for Production Acceptance of Small Unmanned Aircraft System (sUAS), − ASTM F2911 defines production acceptance requirements for sUAS. Requirements covered include several aspects of production, system level production acceptance, quality assurance and documentation. •, ASTM F3002, Specification for Design of the Command and Control System for Small Unmanned Aircraft Systems (sUAS), − ASTM F3002 provides a consensus standard in support of an application to a nation’s governing aviation authority to operate an sUAS for commercial or public use. The standard focuses on command and control (C2) links, including a diagram of a C2 system and general requirements for C2 system components. •, ASTM F3003, Specification for Quality Assurance of a Small Unmanned Aircraft System (sUAS), − ASTM F3003 defines quality assurance requirements for design, manufacture and production of small unmanned aircraft systems. Guidance is given to sUAS manufacturers for the development of a quality assurance program. •, ASTM F3005, Specification for Batteries for Use in Small Unmanned Aircraft Systems (sUAS), − ASTM F3005 defines requirements for battery cells used in sUAS. Mechanical design and safety, and electrical design battery maintenance are primary battery-related areas that are covered. “The introduction of these standards developed by F38 will help to provide a safe and appropriate path for near-term routine sUAS operations in airspace systems of the United States and other countries,” says…, Technical Contact:, Theodore J. Wierzbanowski, Phone: 626-429-8864; wierzbanowski@uasinthenas.com, ASTM Staff Contact:, Stephen Mawn, Phone: 610-832-9726; smawn@astm.org , ASTM PR Contact:, Barbara Schindler, Phone: 610-832-9603; bschindl@astm.org Release #9636
-
Standards development work for stormwater management and other related products will highlight the Dec. 10 meetings of ASTM International Committee C27 on Precast Concrete Products in Jacksonville, Fla., during the December 2013 ASTM Committee Week. Five proposed ASTM standards are under way for precast concrete stormwater management products: • WK26951, Practice for Field Measurement of…, ASTM Committee C27 Next Meeting:, Dec.10-11, 2013, December committee week, Jacksonville, Fla. ASTM Staff Contact: Joe Hugo, Phone: 610-832-9740; jhugo@astm.org, ASTM PR Contact:, Barbara Schindler, Phone: 610-832-9603; bschindl@astm.org Release #9502
-
While machine-placed wet-cast precast concrete retaining wall units have been commercially available since the late 1990s, there has not been an ASTM standard available to cover these products. Now, ASTM International Committee C27 on Precast Concrete Products is working on such a standard. ASTM WK38192 , Specification for Wet-Cast Precast Modular Block Retaining Wall Units, is being developed by…, ASTM Committee C27 Next Meeting:, Dec. 10, 2013, December Committee Week, Jacksonville, Fla., Technical Contact:, Clint Hines, JC Hines and Associates LLC, Anderson, Ohio, Phone: 513-843-6570; clint@jchines.com, ASTM Staff Contact:, Joseph Hugo, Phone: 610-832-9740; jhugo@astm.org, ASTM PR Contact:, Barbara Schindler, Phone: 610-832-9603; bschindl@astm.org Release #9441
-
Stormwater hydrodynamic systems are used to remove settable solids that could cause contamination from stormwater runoff. A proposed new ASTM International standard will be used to specify test material with a common target particle size distribution for use in testing HDS systems. The proposed new standard, ASTM WK39909 , Specification for Surrogate Test Solids for Measuring Performance of…, ASTM Committee C27 Next Meeting:, Dec. 10-11, 2013, December Committee Week, Jacksonville, Fla., Technical Contact:, Adam A. Stevens, CONTECH Engineered Solutions, Scarborough, Maine, Phone: 207-885-9740; stevensa@contech-cpi.com, ASTM Staff Contact:, Joseph Hugo, Phone: 610-832-9740; jhugo@astm.org, ASTM PR Contact:, Barbara Schindler, Phone: 610-832-9603; bschindl@astm.org Release #9323
-
While the quality of coating materials for buried pipe at nuclear power plants has evolved over time, there is currently no written standard that would allow plants to fully take advantage of advances in coating technology. A proposed new standard will provide coating guidance for plants seeking to repair or replace buried pipe. The proposed standard, ASTM WK36282 , Guide for Selection of Coating…
-
While there are many commercially available stormwater treatment products currently on the market, there is no universal testing standard that would allow the performance of these products to be accurately compared. A proposed new ASTM International standard will fill this need, providing a testing method for stormwater treatment products that use filtration as a primary treatment process. ASTM…