Search
Advanced search
Filter by category
Filter by committee
Search results
-
New ASTM Nuclear Fuel Cycle Standard Provides Guidelines for Gathering Physical and Rheological DataObtaining data from the measurement and calculation of physical and rheological properties of radioactive solutions, slurries and sludges is essential in developing appropriate simulants for the design and testing of retrieval, transport, mixing and storage systems for treating radioactive materials. A new ASTM International standard provides guidelines for gathering this data. ASTM C1752 , Guide…
-
New Section of Website Collects ASTM Nuclear-Related Work in a Single Source ASTM International standards play an important role throughout the nuclear energy industry. In order to tie together the nuclear-related activity being conducted across its committees, ASTM has added a nuclear portal to its website ( www.astm.org ). The portal, which gathers together all of ASTM’s standards developing…
-
ASTM International Committee D15 on Engine Coolants has formed three new subcommittees: Subcommittees D15.22 on Non-Aqueous Coolants ; D15.25 on Diesel Exhaust Fluid ; and D15.30 on Industrial Heat Transfer Fluids . All interested parties are invited to join in the standards developing activities of these new subcommittees., D15.22, Non-Aqueous Coolants, While there has been an increased interest in non-aqueous coolants industry, there are no current ASTM standards in this area. D15.22 will begin to develop such standards. “The envisioned standards for non-aqueous coolants would be performance standards, rather than ingredient standards, to allow for formulations that are not currently proprietary,” says Jonathan T. Light, chief engineer, Evans…, D15.25, Diesel Exhaust Fluid, Diesel exhaust fluid, often referred to as DEF, is required by many diesel engine-powered vehicles delivered after January 2010. More recent environmental standards issued by the U.S. Environmental Protection Agency have created more stringent emissions standards for agricultural, construction and forestry equipment. DEF is used to reduce nitrogen oxide emissions, which allows original equipment…, D15.30, Industrial Heat Transfer Fluids, Members of D15 recognized that changes in the antifreeze industry, including new manufacturing technologies, improved inhibitor chemistries and recycling technologies, would likely be adapted to the facilities industry as a natural course of innovation. Because D15 has experience developing standards that are technically similar to the facilities heat transfer industry, it was deemed appropriate…, ASTM Committee D15 Next Meeting:, May 17-18, May Committee Week, Anaheim, Calif., Technical Contact:, (D15.22) Jonathan T. Light, Evans Cooling Systems Inc., Sharon, Conn., Phone: 860-435-2418; jtlight@comcast.net ; (D15.25) Edward Eaton Sr., Amalgatech, Phoenix, Ariz., Phone: 602-252-0280; edeaton@amalgatech.com ; (D15.30) John Panasewicz, Clear Choice Antifreeze, Henderson, Colo., Phone: 303-227-9900; johnp@clearchoiceantifreeze.com, ASTM Staff Contact:, Joe Koury, Phone: 610-832-9804; jkoury@astm.org, ASTM PR Contact:, Barbara Schindler, Phone: 610-832-9603; bschindl@astm.org Release #8837
-
A series of proposed new standards being developed by ASTM International Committee D15 on Engine Coolants would remove technical barriers that currently prevent the cost-effective replacement of ethylene glycol with more environmentally friendly glycerin in antifreeze. The proposed standards are under the jurisdiction of Subcommittee D15.93 on Research and Long Range Planning. Natural glycerin is…
-
Invented in the early 1990s, the tomographic gamma scanner is used in the nondestructive assay of radioactive waste contained in drums or cans. In the last 10 years, TGS technology has been industrialized, with systems operating in South Korea, the United States and Europe. A new ASTM International test provides users with a means of streamlining TGS procedures and practices, and it will be…
-
New ASTM Committee E58 to Develop Standards That Support Engineering Investigations and Assist the Court, ASTM International, one of the largest voluntary standards development organizations (SDO) in the world, today announced the formation of ASTM Committee E58 on Forensic Engineering . Committee E58 will develop standards that promote awareness of the scientific, engineering, ethical and legal considerations inherent in forensic engineering investigations, reporting and testimony., Bringing Engineering Reason to the Dispute Resolution Process, Forensic engineering focuses on the investigation of alleged defects in materials, products, structures and components. These cases are litigated on the premise that the defects cause personal injury or damage to property. Forensic engineering investigations may help determine the causes of these events and assist the disputing parties or the court in resolving the case. Today, forensic…, Assisting the Court through Consensus Standards, ASTM Committee E58 comes together to create important standards and guides that will support the judicial process by facilitating an improved understanding of forensic engineering practices and associated technical issues. This will better enable the court to resolve disputes in a more well-informed and efficient manner, relying on deeper knowledge of the technical data presented and the sound…, E58 Standards: Guiding Forensic Engineering Practice, E58 standards will help guide forensic engineers in conducting investigations in a robust manner while protecting overall public safety. The initial scope of Committee E58 activities will be driven by subcommittees on Product Defect Incidents, Vehicular Incidents, Electrical Incidents and Industrial Processes. ASTM Committee E58 will build upon the body of work of former subcommittee E30.05 on…, Foundation Standard for the Forensic Engineering Profession, Other E58 standards will bolster the role of forensic engineering professionals in the eyes of the court and other users of these services. Consistent with this objective, Committee E58 has recently drafted a general practice document for the forensic engineering profession, titled Standard Guide for the Practice of Forensic Engineering. The goal of this standard is to further educate the court…
-
In response to requests from fuel producers around the world, ASTM International Committee C26 on Nuclear Fuel Cycle has developed a standard for using the total evaporation method to determine uranium or plutonium composition. The new standard, C 1672 , Test Method for Determination of Uranium or Plutonium Isotopic Composition or Concentration by the Total Evaporation Method Using a Thermal…
-
Neutron absorbers have been used for criticality control in spent nuclear fuel pools and in spent fuel transportation casks for decades. However, since the late 1980s, as spent fuel storage pools have been filled, utilities have transferred spent fuel into dry dual-purpose (storage/transportation) canisters. The neutron absorbers used in dual-purpose canisters are subjected to different operating…
-
In response to changing emissions restrictions and consumer expectations, ASTM International Committee D15 on Engine Coolants is now developing a proposed new standard, WK16003 , Specification for Engine Coolant Grade 1,3-propanediol (PDO). This task group is under the jurisdiction of Subcommittee D15.07 on Specifications. Edward Eaton, D15 member and chief engineer, Amalgatech, says that as…
-
ASTM International Committee C26 on Nuclear Fuel Cycle has recently published a new standard and has begun the development of a proposed new standard. Subcommittee C26.14 on Remote Systems is responsible for the newly approved standard, C 1661 , Guide for Viewing Systems for Remotely Operated Facilities, while Subcommittee C26.02 on Fuel and Fertile Material Specifications is currently at work on…, C 1661, Guide for Viewing Systems for Remotely Operated Facilities, A new ASTM International standard establishes minimum requirements for viewing systems for remotely operated facilities, including hot cells, used for the processing and handling of nuclear and radioactive materials. The standard, C 1661 , Guide for Viewing Systems for Remotely Operated Facilities, was developed by Subcommittee C26.14 on Remote Systems, which is part of ASTM International…, WK14330, Nuclear Fuel Pellet Physical Integrity Limits: Chips, Cracks, Defects, The quality of fuel pellets is currently an important topic being studied throughout the nuclear industry, with study groups such as the Electric Power Research Institute and Institute of Nuclear Power Operations examining the effect of pellet quality on the performance of nuclear fuel. ASTM International Committee C26 on Nuclear Fuel Cycle is addressing the topic of fuel pellets with a proposed…